DEVICE_VARS += NETGEAR_BOARD_ID NETGEAR_HW_ID DEVICE_VARS += TPLINK_BOARD_ID define Device/kernel-size-migration DEVICE_COMPAT_VERSION := 2.0 DEVICE_COMPAT_MESSAGE := *** Kernel partition size has changed from earlier \ versions. You need to sysupgrade with the OpenWrt factory image and \ use the force flag when image check fails. Settings will be lost. *** endef define Build/buffalo-rootfs-cksum ( \ echo -ne "\x$$(od -A n -t u1 $@ | tr -s ' ' '\n' | \ $(STAGING_DIR_HOST)/bin/awk '{s+=$$0}END{printf "%x", 255-s%256}')"; \ ) >> $@ endef define Build/edimax-header $(eval edimax_model=$(word 1,$(1))) $(STAGING_DIR_HOST)/bin/mkedimaximg \ -b -s CSYS -m $(edimax_model) \ -f 0x70000 -S 0x1200000 \ -i $@ -o $@.new @mv $@.new $@ endef define Device/DniImage KERNEL_SUFFIX := -uImage KERNEL = kernel-bin | append-dtb | uImage none KERNEL_NAME := zImage NETGEAR_BOARD_ID := NETGEAR_HW_ID := UBINIZE_OPTS := -E 5 IMAGES += factory.img IMAGE/factory.img := append-kernel | pad-offset $$$$(BLOCKSIZE) 64 | \ append-uImage-fakehdr filesystem | pad-to $$$$(KERNEL_SIZE) | \ append-ubi | netgear-dni IMAGE/sysupgrade.bin := append-kernel | pad-offset $$$$(BLOCKSIZE) 64 | \ append-uImage-fakehdr filesystem | sysupgrade-tar kernel=$$$$@ | \ append-metadata endef define Device/TpSafeImage KERNEL_SUFFIX := -uImage KERNEL = kernel-bin | append-dtb | uImage none KERNEL_NAME := zImage TPLINK_BOARD_ID := IMAGES += factory.bin IMAGE/factory.bin := append-rootfs | tplink-safeloader factory IMAGE/sysupgrade.bin := append-rootfs | \ tplink-safeloader sysupgrade | append-metadata endef define Device/ZyXELImage KERNEL_SUFFIX := -uImage KERNEL = kernel-bin | append-dtb | uImage none | \ pad-to $$(KERNEL_SIZE) KERNEL_NAME := zImage IMAGES += factory.bin IMAGE/factory.bin := append-rootfs | pad-rootfs | \ pad-to $$$$(BLOCKSIZE) | zyxel-ras-image separate-kernel IMAGE/sysupgrade.bin/squashfs := append-rootfs | \ pad-to $$$$(BLOCKSIZE) | sysupgrade-tar rootfs=$$$$@ | \ append-metadata endef define Device/arris_tr4400-v2 $(call Device/LegacyImage) DEVICE_VENDOR := Arris DEVICE_MODEL := TR4400 DEVICE_VARIANT := v2 SOC := qcom-ipq8065 BLOCKSIZE := 128k PAGESIZE := 2048 DEVICE_PACKAGES := ath10k-firmware-qca9984-ct ath10k-firmware-qca99x0-ct KERNEL_IN_UBI := 1 endef TARGET_DEVICES += arris_tr4400-v2 define Device/askey_rt4230w-rev6 $(call Device/LegacyImage) DEVICE_VENDOR := Askey DEVICE_MODEL := RT4230W DEVICE_VARIANT := REV6 SOC := qcom-ipq8065 BLOCKSIZE := 128k PAGESIZE := 2048 DEVICE_PACKAGES := ath10k-firmware-qca9984-ct KERNEL_IN_UBI := 1 endef TARGET_DEVICES += askey_rt4230w-rev6 define Device/asrock_g10 $(call Device/FitImage) $(call Device/UbiFit) SOC := qcom-ipq8064 DEVICE_VENDOR := ASRock DEVICE_MODEL := G10 BLOCKSIZE := 128k PAGESIZE := 2048 KERNEL_SIZE := 5332k DEVICE_PACKAGES := kmod-i2c-gpio ath10k-firmware-qca99x0-ct IMAGE/nand-factory.bin := append-ubi | edimax-header RN67 endef TARGET_DEVICES += asrock_g10 define Device/buffalo_wxr-2533dhp $(call Device/LegacyImage) SOC := qcom-ipq8064 DEVICE_VENDOR := Buffalo DEVICE_MODEL := WXR-2533DHP BLOCKSIZE := 128k PAGESIZE := 2048 IMAGE_SIZE := 65536k KERNEL_IN_UBI := 1 IMAGE/sysupgrade.bin := append-rootfs | buffalo-rootfs-cksum | \ sysupgrade-tar rootfs=$$$$@ | append-metadata DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct endef TARGET_DEVICES += buffalo_wxr-2533dhp define Device/compex_wpq864 $(call Device/FitImage) $(call Device/UbiFit) DEVICE_VENDOR := Compex DEVICE_MODEL := WPQ864 BLOCKSIZE := 128k PAGESIZE := 2048 SOC := qcom-ipq8064 DEVICE_PACKAGES := kmod-gpio-beeper endef TARGET_DEVICES += compex_wpq864 define Device/edgecore_ecw5410 $(call Device/FitImage) $(call Device/UbiFit) DEVICE_VENDOR := Edgecore DEVICE_MODEL := ECW5410 SOC := qcom-ipq8068 BLOCKSIZE := 128k PAGESIZE := 2048 DEVICE_DTS_CONFIG := config@v2.0-ap160 DEVICE_PACKAGES := ath10k-firmware-qca9984-ct endef TARGET_DEVICES += edgecore_ecw5410 define Device/linksys_ea7500-v1 $(call Device/LegacyImage) $(Device/kernel-size-migration) DEVICE_VENDOR := Linksys DEVICE_MODEL := EA7500 DEVICE_VARIANT := v1 SOC := qcom-ipq8064 PAGESIZE := 2048 BLOCKSIZE := 128k KERNEL_SIZE := 4096k KERNEL = kernel-bin | append-dtb | uImage none | \ append-uImage-fakehdr filesystem UBINIZE_OPTS := -E 5 IMAGES := factory.bin sysupgrade.bin IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | \ append-ubi | pad-to $$$$(PAGESIZE) DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct endef TARGET_DEVICES += linksys_ea7500-v1 define Device/linksys_ea8500 $(call Device/LegacyImage) $(Device/kernel-size-migration) DEVICE_VENDOR := Linksys DEVICE_MODEL := EA8500 SOC := qcom-ipq8064 PAGESIZE := 2048 BLOCKSIZE := 128k KERNEL_SIZE := 4096k KERNEL = kernel-bin | append-dtb | uImage none | \ append-uImage-fakehdr filesystem BOARD_NAME := ea8500 SUPPORTED_DEVICES += ea8500 UBINIZE_OPTS := -E 5 IMAGES += factory.bin IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | \ append-ubi DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct endef TARGET_DEVICES += linksys_ea8500 define Device/meraki_mr42 $(call Device/FitImage) DEVICE_VENDOR := Cisco Meraki DEVICE_MODEL := MR42 SOC := qcom-ipq8068 BLOCKSIZE := 128k PAGESIZE := 2048 KERNEL_LOADADDR = 0x44208000 DEVICE_PACKAGES := -swconfig -kmod-ata-ahci -kmod-ata-ahci-platform \ -kmod-usb-ohci -kmod-usb2 -kmod-usb-ledtrig-usbport \ -kmod-phy-qcom-ipq806x-usb -kmod-usb3 -kmod-usb-dwc3-qcom \ -uboot-envtools ath10k-firmware-qca9887-ct \ ath10k-firmware-qca99x0-ct kmod-eeprom-at24 kmod-hwmon-ina2xx \ kmod-leds-tlc591xx endef TARGET_DEVICES += meraki_mr42 define Device/meraki_mr52 $(call Device/FitImage) DEVICE_VENDOR := Cisco Meraki DEVICE_MODEL := MR52 SOC := qcom-ipq8068 BLOCKSIZE := 128k PAGESIZE := 2048 KERNEL_LOADADDR = 0x44208000 DEVICE_DTS_CONFIG := config@2 DEVICE_PACKAGES := -swconfig -kmod-ata-ahci -kmod-ata-ahci-platform \ -kmod-usb-ohci -kmod-usb2 -kmod-usb-ledtrig-usbport \ -kmod-phy-qcom-ipq806x-usb -kmod-usb3 -kmod-usb-dwc3-qcom \ -uboot-envtools ath10k-firmware-qca9887-ct \ ath10k-firmware-qca9984-ct kmod-eeprom-at24 kmod-hwmon-ina2xx \ kmod-leds-tlc591xx endef TARGET_DEVICES += meraki_mr52 define Device/nec_wg2600hp $(call Device/LegacyImage) DEVICE_VENDOR := NEC DEVICE_MODEL := Aterm WG2600HP SOC := qcom-ipq8064 BLOCKSIZE := 64k BOARD_NAME := wg2600hp IMAGE/sysupgrade.bin := append-kernel | append-rootfs | \ pad-rootfs | append-metadata DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct endef TARGET_DEVICES += nec_wg2600hp define Device/nec_wg2600hp3 $(call Device/LegacyImage) DEVICE_VENDOR := NEC Platforms DEVICE_MODEL := Aterm WG2600HP3 SOC := qcom-ipq8062 BLOCKSIZE := 64k IMAGES := sysupgrade.bin IMAGE/sysupgrade.bin := append-kernel | append-rootfs | \ pad-rootfs | append-metadata DEVICE_PACKAGES := -kmod-ata-ahci -kmod-ata-ahci-platform \ -kmod-usb-ohci -kmod-usb2 -kmod-usb-ledtrig-usbport \ -kmod-phy-qcom-ipq806x-usb -kmod-usb3 -kmod-usb-dwc3-qcom \ ath10k-firmware-qca9984-ct endef TARGET_DEVICES += nec_wg2600hp3 define Device/netgear_d7800 $(call Device/DniImage) DEVICE_VENDOR := NETGEAR DEVICE_MODEL := Nighthawk X4 D7800 SOC := qcom-ipq8064 KERNEL_SIZE := 4096k NETGEAR_BOARD_ID := D7800 NETGEAR_HW_ID := 29764958+0+128+512+4x4+4x4 BLOCKSIZE := 128k PAGESIZE := 2048 BOARD_NAME := d7800 SUPPORTED_DEVICES += d7800 DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct DEVICE_COMPAT_VERSION := 2.0 DEVICE_COMPAT_MESSAGE := Sysupgrade does not work due to rootfs ubi partition size change. \ Use factory image with the TFTP recovery flash routine. endef TARGET_DEVICES += netgear_d7800 define Device/netgear_r7500 $(call Device/DniImage) DEVICE_VENDOR := NETGEAR DEVICE_MODEL := Nighthawk X4 R7500 DEVICE_VARIANT := v1 SOC := qcom-ipq8064 KERNEL_SIZE := 4096k NETGEAR_BOARD_ID := R7500 NETGEAR_HW_ID := 29764841+0+128+256+3x3+4x4 BLOCKSIZE := 128k PAGESIZE := 2048 BOARD_NAME := r7500 SUPPORTED_DEVICES += r7500 DEVICE_PACKAGES := ath10k-firmware-qca988x-ct endef TARGET_DEVICES += netgear_r7500 define Device/netgear_r7500v2 $(call Device/DniImage) DEVICE_VENDOR := NETGEAR DEVICE_MODEL := Nighthawk X4 R7500 DEVICE_VARIANT := v2 SOC := qcom-ipq8064 KERNEL_SIZE := 4096k NETGEAR_BOARD_ID := R7500v2 NETGEAR_HW_ID := 29764958+0+128+512+3x3+4x4 BLOCKSIZE := 128k PAGESIZE := 2048 BOARD_NAME := r7500v2 SUPPORTED_DEVICES += r7500v2 DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct \ ath10k-firmware-qca988x-ct endef TARGET_DEVICES += netgear_r7500v2 define Device/netgear_r7800 $(call Device/DniImage) DEVICE_VENDOR := NETGEAR DEVICE_MODEL := Nighthawk X4S R7800 SOC := qcom-ipq8065 KERNEL_SIZE := 4096k NETGEAR_BOARD_ID := R7800 NETGEAR_HW_ID := 29764958+0+128+512+4x4+4x4+cascade BLOCKSIZE := 128k PAGESIZE := 2048 BOARD_NAME := r7800 SUPPORTED_DEVICES += r7800 DEVICE_PACKAGES := ath10k-firmware-qca9984-ct kmod-ramoops endef TARGET_DEVICES += netgear_r7800 define Device/netgear_xr500 $(call Device/DniImage) DEVICE_VENDOR := NETGEAR DEVICE_MODEL := Nighthawk XR500 SOC := qcom-ipq8065 KERNEL_SIZE := 4096k NETGEAR_BOARD_ID := XR500 NETGEAR_HW_ID := 29764958+0+256+512+4x4+4x4+cascade BLOCKSIZE := 128k PAGESIZE := 2048 DEVICE_PACKAGES := ath10k-firmware-qca9984-ct kmod-ramoops endef TARGET_DEVICES += netgear_xr500 define Device/nokia_ac400i $(call Device/FitImage) $(call Device/UbiFit) DEVICE_VENDOR := Nokia DEVICE_MODEL := AC400i SOC := qcom-ipq8065 DEVICE_DTS := qcom-ipq8065-ac400i BLOCKSIZE := 128k PAGESIZE := 2048 BOARD_NAME := ac400i DEVICE_PACKAGES := ath10k-firmware-qca9984-ct endef TARGET_DEVICES += nokia_ac400i define Device/qcom_ipq8064-ap148 $(call Device/FitImage) $(call Device/UbiFit) DEVICE_VENDOR := Qualcomm DEVICE_MODEL := AP148 DEVICE_VARIANT := standard SOC := qcom-ipq8064 DEVICE_DTS := qcom-ipq8064-ap148 KERNEL_INSTALL := 1 BLOCKSIZE := 128k PAGESIZE := 2048 BOARD_NAME := ap148 SUPPORTED_DEVICES += ap148 DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct endef TARGET_DEVICES += qcom_ipq8064-ap148 define Device/qcom_ipq8064-ap148-legacy $(call Device/LegacyImage) $(call Device/UbiFit) DEVICE_VENDOR := Qualcomm DEVICE_MODEL := AP148 DEVICE_VARIANT := legacy SOC := qcom-ipq8064 DEVICE_DTS := qcom-ipq8064-ap148 BLOCKSIZE := 128k PAGESIZE := 2048 BOARD_NAME := ap148 SUPPORTED_DEVICES := qcom,ipq8064-ap148 ap148 DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct endef TARGET_DEVICES += qcom_ipq8064-ap148-legacy define Device/qcom_ipq8064-ap161 $(call Device/FitImage) $(call Device/UbiFit) DEVICE_VENDOR := Qualcomm DEVICE_MODEL := AP161 SOC := qcom-ipq8064 DEVICE_DTS := qcom-ipq8064-ap161 KERNEL_INSTALL := 1 BLOCKSIZE := 128k PAGESIZE := 2048 BOARD_NAME := ap161 DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct endef TARGET_DEVICES += qcom_ipq8064-ap161 define Device/qcom_ipq8064-db149 $(call Device/FitImage) DEVICE_VENDOR := Qualcomm DEVICE_MODEL := DB149 SOC := qcom-ipq8064 DEVICE_DTS := qcom-ipq8064-db149 KERNEL_INSTALL := 1 BOARD_NAME := db149 DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct endef TARGET_DEVICES += qcom_ipq8064-db149 define Device/tplink_ad7200 $(call Device/TpSafeImage) DEVICE_VENDOR := TP-Link DEVICE_MODEL := AD7200 DEVICE_VARIANT := v1/v2 DEVICE_ALT0_VENDOR := TP-Link DEVICE_ALT0_MODEL := Talon AD7200 DEVICE_ALT0_VARIANT := v1/v2 SOC := qcom-ipq8064 BLOCKSIZE := 128k PAGESIZE := 2048 TPLINK_BOARD_ID := AD7200 DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct kmod-ramoops kmod-wil6210 endef TARGET_DEVICES += tplink_ad7200 define Device/tplink_c2600 $(call Device/TpSafeImage) DEVICE_VENDOR := TP-Link DEVICE_MODEL := Archer C2600 DEVICE_VARIANT := v1 SOC := qcom-ipq8064 BLOCKSIZE := 128k PAGESIZE := 2048 BOARD_NAME := c2600 SUPPORTED_DEVICES += c2600 TPLINK_BOARD_ID := C2600 DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct kmod-ramoops endef TARGET_DEVICES += tplink_c2600 define Device/tplink_vr2600v DEVICE_VENDOR := TP-Link DEVICE_MODEL := Archer VR2600v DEVICE_VARIANT := v1 KERNEL_SUFFIX := -uImage KERNEL = kernel-bin | append-dtb | uImage none KERNEL_NAME := zImage IMAGE_SIZE := 12672k SOC := qcom-ipq8064 BLOCKSIZE := 128k PAGESIZE := 2048 BOARD_NAME := vr2600v SUPPORTED_DEVICES += vr2600v DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct IMAGE/sysupgrade.bin := pad-extra 512 | append-kernel | \ append-rootfs | pad-rootfs | append-metadata endef TARGET_DEVICES += tplink_vr2600v define Device/ubnt_unifi-ac-hd $(call Device/FitImageLzma) DEVICE_VENDOR := Ubiquiti DEVICE_MODEL := UniFi AC HD SOC := qcom-ipq8064 BLOCKSIZE := 64k IMAGE_SIZE := 14784k DEVICE_PACKAGES := ath10k-firmware-qca9984-ct IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | \ append-rootfs | pad-rootfs | check-size | append-metadata endef TARGET_DEVICES += ubnt_unifi-ac-hd define Device/zyxel_nbg6817 DEVICE_VENDOR := ZyXEL DEVICE_MODEL := NBG6817 SOC := qcom-ipq8065 KERNEL_SIZE := 4096k BLOCKSIZE := 64k BOARD_NAME := nbg6817 RAS_BOARD := NBG6817 RAS_ROOTFS_SIZE := 20934k RAS_VERSION := "V1.99(OWRT.9999)C0" SUPPORTED_DEVICES += nbg6817 DEVICE_PACKAGES := ath10k-firmware-qca9984-ct e2fsprogs \ kmod-fs-ext4 losetup $(call Device/ZyXELImage) endef TARGET_DEVICES += zyxel_nbg6817