// SPDX-License-Identifier: GPL-2.0-or-later OR MIT

#include "qcom-ipq8062.dtsi"
#include <dt-bindings/input/input.h>

/delete-node/ &nand_pins;

/ {
	model = "NEC Platforms Aterm WG2600HP3";
	compatible = "nec,wg2600hp3", "qcom,ipq8062", "qcom,ipq8064";

	memory {
		device_type = "memory";
		reg =  <0x42000000 0x1e000000>;
	};

	aliases {
		label-mac-device = &gmac2;

		led-boot = &led_power_green;
		led-failsafe = &led_power_red;
		led-running = &led_power_green;
		led-upgrade = &led_power_red;
	};

	keys {
		compatible = "gpio-keys";

		pinctrl-0 = <&buttons_pins>;
		pinctrl-names = "default";

		reset {
			label = "reset";
			gpios = <&qcom_pinmux 24 GPIO_ACTIVE_LOW>;
			linux,code = <KEY_RESTART>;
			debounce-interval = <60>;
			wakeup-source;
		};

		wps {
			label = "wps";
			gpios = <&qcom_pinmux 22 GPIO_ACTIVE_LOW>;
			linux,code = <KEY_WPS_BUTTON>;
			debounce-interval = <60>;
			wakeup-source;
		};

		mode0 {
			label = "mode0";
			gpios = <&qcom_pinmux 40 GPIO_ACTIVE_LOW>;
			linux,code = <BTN_0>;
			linux,input-type = <EV_SW>;
			debounce-interval = <60>;
			wakeup-source;
		};

		mode1 {
			label = "mode1";
			gpios = <&qcom_pinmux 41 GPIO_ACTIVE_LOW>;
			linux,code = <BTN_1>;
			linux,input-type = <EV_SW>;
			debounce-interval = <60>;
			wakeup-source;
		};
	};

	leds {
		compatible = "gpio-leds";

		pinctrl-0 = <&leds_pins>;
		pinctrl-names = "default";

		led_power_green: power_green {
			label = "green:power";
			gpios = <&qcom_pinmux 14 GPIO_ACTIVE_HIGH>;
		};

		led_power_red: power_red {
			label = "red:power";
			gpios = <&qcom_pinmux 35 GPIO_ACTIVE_HIGH>;
		};

		active_green {
			label = "green:active";
			gpios = <&qcom_pinmux 42 GPIO_ACTIVE_HIGH>;
		};

		active_red {
			label = "red:active";
			gpios = <&qcom_pinmux 38 GPIO_ACTIVE_HIGH>;
		};

		wlan2g_green {
			label = "green:wlan2g";
			gpios = <&qcom_pinmux 55 GPIO_ACTIVE_HIGH>;
			linux,default-trigger = "phy1tpt";
		};

		wlan2g_red {
			label = "red:wlan2g";
			gpios = <&qcom_pinmux 56 GPIO_ACTIVE_HIGH>;
		};

		wlan5g_green {
			label = "green:wlan5g";
			gpios = <&qcom_pinmux 57 GPIO_ACTIVE_HIGH>;
			linux,default-trigger = "phy0tpt";
		};

		wlan5g_red {
			label = "red:wlan5g";
			gpios = <&qcom_pinmux 58 GPIO_ACTIVE_HIGH>;
		};

		tv_green {
			label = "green:tv";
			gpios = <&qcom_pinmux 46 GPIO_ACTIVE_HIGH>;
		};

		tv_red {
			label = "red:tv";
			gpios = <&qcom_pinmux 36 GPIO_ACTIVE_HIGH>;
		};

		converter_green {
			label = "green:converter";
			gpios = <&qcom_pinmux 43 GPIO_ACTIVE_HIGH>;
		};

		converter_red {
			label = "red:converter";
			gpios = <&qcom_pinmux 15 GPIO_ACTIVE_HIGH>;
		};
	};
};

&qcom_pinmux {
	pinctrl-0 = <&akro_pins>;
	pinctrl-names = "default";

	spi_pins: spi_pins {
		mux {
			pins = "gpio18", "gpio19", "gpio21";
			function = "gsbi5";
			bias-pull-down;
		};

		data {
			pins = "gpio18", "gpio19";
			drive-strength = <10>;
		};

		cs {
			pins = "gpio20";
			drive-strength = <10>;
		};

		clk {
			pins = "gpio21";
			drive-strength = <12>;
		};
	};

	buttons_pins: buttons_pins {
		mux {
			pins = "gpio22", "gpio24", "gpio40",
				"gpio41";
			function = "gpio";
			drive-strength = <2>;
			bias-pull-up;
		};
	};

	leds_pins: leds_pins {
		mux {
			pins = "gpio14", "gpio15", "gpio35",
				"gpio36", "gpio38", "gpio42",
				"gpio43", "gpio46", "gpio55",
				"gpio56", "gpio57", "gpio58";
			function = "gpio";
			bias-pull-down;
		};

		akro2 {
			pins = "gpio15", "gpio35", "gpio38",
				"gpio42", "gpio43", "gpio46",
				"gpio55", "gpio56", "gpio57",
				"gpio58";
			drive-strength = <2>;
		};

		akro4 {
			pins = "gpio14", "gpio36";
			drive-strength = <4>;
		};
	};

	/*
	 * Stock firmware has the following settings, so let's do the same.
	 * I don't sure why these are required.
	 */
	akro_pins: akro_pinmux {
		akro {
			pins = "gpio17", "gpio26", "gpio47";
			function = "gpio";
			drive-strength = <2>;
			bias-pull-down;
		};

		reset {
			pins = "gpio45";
			function = "gpio";
			drive-strength = <2>;
			bias-disable;
			output-low;
		};

		gmac0_rgmii {
			pins = "gpio25";
			function = "gpio";
			drive-strength = <8>;
			bias-disable;
		};
	};
};

&gsbi5 {
	status = "okay";
	qcom,mode = <GSBI_PROT_SPI>;

	spi@1a280000 {
		status = "okay";

		pinctrl-0 = <&spi_pins>;
		pinctrl-names = "default";

		cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>;

		flash@0 {
			compatible = "jedec,spi-nor";
			reg = <0>;
			spi-max-frequency = <50000000>;
			m25p,fast-read;

			partitions {
				compatible = "fixed-partitions";
				#address-cells = <1>;
				#size-cells = <1>;

				partition@0 {
					label = "SBL1";
					reg = <0x0000000 0x0020000>;
					read-only;
				};

				partition@20000 {
					label = "MIBIB";
					reg = <0x0020000 0x0020000>;
					read-only;
				};

				partition@40000 {
					label = "SBL2";
					reg = <0x0040000 0x0040000>;
					read-only;
				};

				partition@80000 {
					label = "SBL3";
					reg = <0x0080000 0x0080000>;
					read-only;
				};

				partition@100000 {
					label = "DDRCONFIG";
					reg = <0x0100000 0x0010000>;
					read-only;
				};

				partition@110000 {
					label = "SSD";
					reg = <0x0110000 0x0010000>;
					read-only;
				};

				partition@120000 {
					label = "TZ";
					reg = <0x0120000 0x0080000>;
					read-only;
				};

				partition@1a0000 {
					label = "RPM";
					reg = <0x01a0000 0x0080000>;
					read-only;
				};

				partition@220000 {
					label = "APPSBL";
					reg = <0x0220000 0x0080000>;
					read-only;
				};

				partition@2a0000 {
					label = "APPSBLENV";
					reg = <0x02a0000 0x0010000>;
					read-only;
				};

				factory: partition@2b0000 {
					label = "PRODUCTDATA";
					reg = <0x02b0000 0x0030000>;
					read-only;
				};

				partition@2e0000 {
					label = "ART";
					reg = <0x02e0000 0x0040000>;
					read-only;
				};

				partition@320000 {
					label = "TP";
					reg = <0x0320000 0x0040000>;
					read-only;
				};

				partition@360000 {
					label = "TINY";
					reg = <0x0360000 0x0500000>;
					read-only;
				};

				partition@860000 {
					compatible = "denx,uimage";
					label = "firmware";
					reg = <0x0860000 0x17a0000>;
				};
			};
		};
	};
};

&adm_dma {
	status = "okay";
};

&pcie0 {
	status = "okay";

	bridge@0,0 {
		reg = <0x00000000 0 0 0 0>;
		#address-cells = <3>;
		#size-cells = <2>;
		ranges;

		wifi@1,0 {
			compatible = "qcom,ath10k";
			reg = <0x00010000 0 0 0 0>;

			qcom,ath10k-calibration-variant = "NEC-Platforms-WG2600HP3";
		};
	};
};

&pcie1 {
	status = "okay";
	force_gen1 = <1>;

	bridge@0,0 {
		reg = <0x00000000 0 0 0 0>;
		#address-cells = <3>;
		#size-cells = <2>;
		ranges;

		wifi@1,0 {
			compatible = "qcom,ath10k";
			reg = <0x00010000 0 0 0 0>;

			ieee80211-freq-limit = <2400000 2483000>;
			qcom,ath10k-calibration-variant = "NEC-Platforms-WG2600HP3";
		};
	};
};

&mdio0 {
	status = "okay";

	pinctrl-0 = <&mdio0_pins>;
	pinctrl-names = "default";

	phy0: ethernet-phy@0 {
		reg = <0>;
		qca,ar8327-initvals = <
			0x04 0x80080080  /* PAD0_MODE */
			0x0c 0x06000000  /* PAD6_MODE */
			0x10 0x002613a0  /* PWS_REG */
			0x50 0xcc36cc36  /* LED_CTRL0 */
			0x54 0xca36ca36  /* LED_CTRL1 */
			0x58 0xc936c936  /* LED_CTRL2 */
			0x5c 0x03ffff00  /* LED_CTRL3 */
			0x7c 0x0000004e  /* PORT0_STATUS */
			0x94 0x0000004e  /* PORT6_STATUS */
			0xe0 0xc74164de  /* SGMII_CTRL */
			0xe4 0x0006a545  /* MAC_PWR_SEL */
			>;
	};
};

&gmac1 {
	status = "okay";

	pinctrl-0 = <&rgmii2_pins>;
	pinctrl-names = "default";

	phy-mode = "rgmii";
	qcom,id = <1>;
	mdiobus = <&mdio0>;
	mtd-mac-address = <&factory 0x0>;

	fixed-link {
		speed = <1000>;
		full-duplex;
	};
};

&gmac2 {
	status = "okay";
	phy-mode = "sgmii";
	qcom,id = <2>;
	mdiobus = <&mdio0>;
	mtd-mac-address = <&factory 0x6>;

	fixed-link {
		speed = <1000>;
		full-duplex;
	};
};