From f825cdc8bfde7616a14e2163f16303a8973031d2 Mon Sep 17 00:00:00 2001 From: Robert Marko Date: Wed, 7 Oct 2020 17:38:48 +0200 Subject: [PATCH] net: phy: Add Qualcom QCA807x driver This adds driver for the Qualcomm QCA8072 and QCA8075 PHY-s. They are 2 or 5 port IEEE 802.3 clause 22 compliant 10BASE-Te, 100BASE-TX and 1000BASE-T PHY-s. They feature 2 SerDes, one for PSGMII or QSGMII connection with MAC, while second one is SGMII for connection to MAC or fiber. Both models have a combo port that supports 1000BASE-X and 100BASE-FX fiber. Each PHY inside of QCA807x series has 4 digitally controlled output only pins that natively drive LED-s. But some vendors used these to driver generic LED-s controlled by userspace, so lets enable registering each PHY as GPIO controller and add driver for it. These are commonly used in Qualcomm IPQ40xx, IPQ60xx and IPQ807x boards. Signed-off-by: Robert Marko --- drivers/net/phy/Kconfig | 6 ++++++ drivers/net/phy/Makefile | 1 + 2 files changed, 7 insertions(+) --- a/drivers/net/phy/Kconfig +++ b/drivers/net/phy/Kconfig @@ -537,6 +537,12 @@ config NXP_TJA11XX_PHY ---help--- Currently supports the NXP TJA1100 and TJA1101 PHY. +config QCA807X_PHY + tristate "Qualcomm QCA807X PHYs" + depends on OF_MDIO + help + Currently supports the QCA8072 and QCA8075 models. + config QSEMI_PHY tristate "Quality Semiconductor PHYs" ---help--- --- a/drivers/net/phy/Makefile +++ b/drivers/net/phy/Makefile @@ -103,6 +103,7 @@ obj-$(CONFIG_MICROSEMI_PHY) += mscc.o obj-$(CONFIG_NATIONAL_PHY) += national.o obj-$(CONFIG_NXP_TJA11XX_PHY) += nxp-tja11xx.o obj-$(CONFIG_QSEMI_PHY) += qsemi.o +obj-$(CONFIG_QCA807X_PHY) += qca807x.o obj-$(CONFIG_REALTEK_PHY) += realtek.o obj-$(CONFIG_RENESAS_PHY) += uPD60620.o obj-$(CONFIG_ROCKCHIP_PHY) += rockchip.o