From 07b6d0cdbbda8c917480eceaec668f09e4cf24a5 Mon Sep 17 00:00:00 2001 From: Christian Lamparter Date: Mon, 14 Nov 2016 23:49:22 +0100 Subject: [PATCH] mtd: nand: add Winbond manufacturer and chip This patch adds the W25N01GV NAND to the table of known devices. Without this patch the device gets detected: nand: device found, Manufacturer ID: 0xef, Chip ID: 0xaa nand: Unknown NAND 256MiB 1,8V 8-bit nand: 256 MiB, SLC, erase size: 64 KiB, page size: 1024, OOB size : 16 Whereas the u-boot identifies it as: spi_nand: spi_nand_flash_probe SF NAND ID 00:ef:aa:21 SF: Detected W25N01GV with page size 2 KiB, total 128 MiB Due to the page size discrepancy, it's impossible to attach ubi volumes on the device. Signed-off-by: Christian Lamparter --- drivers/mtd/nand/nand_ids.c | 4 ++++ include/linux/mtd/nand.h | 1 + 2 files changed, 5 insertions(+) --- a/drivers/mtd/nand/nand_ids.c +++ b/drivers/mtd/nand/nand_ids.c @@ -54,6 +54,10 @@ struct nand_flash_dev nand_flash_ids[] = { .id = {0xad, 0xde, 0x94, 0xda, 0x74, 0xc4} }, SZ_8K, SZ_8K, SZ_2M, NAND_NEED_SCRAMBLING, 6, 640, NAND_ECC_INFO(40, SZ_1K), 4 }, + {"W25N01GV 1G 3.3V 8-bit", + { .id = {0xef, 0xaa} }, + SZ_2K, SZ_128, SZ_128K, NAND_NO_SUBPAGE_WRITE, + 2, 64, NAND_ECC_INFO(1, SZ_512) }, LEGACY_ID_NAND("NAND 4MiB 5V 8-bit", 0x6B, 4, SZ_8K, SP_OPTIONS), LEGACY_ID_NAND("NAND 4MiB 3,3V 8-bit", 0xE3, 4, SZ_8K, SP_OPTIONS),