From: Christian Lamparter Date: Thu, 12 Apr 2018 21:01:38 +0200 Subject: [PATCH] pinctrl: msm: fix gpio-hog related boot issues Sven Eckelmann reported an issue with the current IPQ4019 pinctrl. Setting up any gpio-hog in the device-tree for his device would "kill the bootup completely": | [ 0.477838] msm_serial 78af000.serial: could not find pctldev for node /soc/pinctrl@1000000/serial_pinmux, deferring probe | [ 0.499828] spi_qup 78b5000.spi: could not find pctldev for node /soc/pinctrl@1000000/spi_0_pinmux, deferring probe | [ 1.298883] requesting hog GPIO enable USB2 power (chip 1000000.pinctrl, offset 58) failed, -517 | [ 1.299609] gpiochip_add_data: GPIOs 0..99 (1000000.pinctrl) failed to register | [ 1.308589] ipq4019-pinctrl 1000000.pinctrl: Failed register gpiochip | [ 1.316586] msm_serial 78af000.serial: could not find pctldev for node /soc/pinctrl@1000000/serial_pinmux, deferring probe | [ 1.322415] spi_qup 78b5000.spi: could not find pctldev for node /soc/pinctrl@1000000/spi_0_pinmux, deferri This was also verified on a RT-AC58U (IPQ4018) which would no longer boot, if a gpio-hog was specified. (Tried forcing the USB LED PIN (GPIO0) to high.). The problem is that Pinctrl+GPIO registration is currently peformed in the following order in pinctrl-msm.c: 1. pinctrl_register() 2. gpiochip_add() 3. gpiochip_add_pin_range() The actual error code -517 == -EPROBE_DEFER is coming from pinctrl_get_device_gpio_range(), which is called through: gpiochip_add of_gpiochip_add of_gpiochip_scan_gpios gpiod_hog gpiochip_request_own_desc __gpiod_request chip->request gpiochip_generic_request pinctrl_gpio_request pinctrl_get_device_gpio_range pinctrl_get_device_gpio_range() is unable to find any valid pin ranges, since nothing has been added to the pinctrldev_list yet. so the range can't be found, and the operation fails with -EPROBE_DEFER. This patch fixes the issue by adding the "gpio-ranges" property to the pinctrl device node of all upstream Qcom SoC. The pin ranges are then added by the gpio core. In order to remain compatible with older, existing DTs (and ACPI) a check for the "gpio-ranges" property has been added to msm_gpio_init(). This prevents the driver of adding the same entry to the pinctrldev_list twice. Reported-by: Sven Eckelmann Signed-off-by: Christian Lamparter Origin: other, https://patchwork.kernel.org/patch/10339127/ --- arch/arm/boot/dts/qcom-ipq4019.dtsi | 1 + drivers/pinctrl/qcom/pinctrl-msm.c | 23 ++++++++++++++++++----- 14 files changed, 32 insertions(+), 6 deletions(-) --- a/arch/arm/boot/dts/qcom-ipq4019.dtsi +++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi @@ -186,6 +186,7 @@ compatible = "qcom,ipq4019-pinctrl"; reg = <0x01000000 0x300000>; gpio-controller; + gpio-ranges = <&tlmm 0 0 100>; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>;