/target/linux/imx6/patches-3.10/
../
0001-usb-chipidea-improve-kconfig.patch
0002-usb-chipidea-fix-the-build-error-with-randconfig.patch
0003-usb-chipidea-improve-kconfig-2.0.patch
0005-ahci_imx-add-ahci-sata-support-on-imx-platforms.patch
0006-ARM-imx6q-update-the-sata-bits-definitions-of-gpr13.patch
0007-ARM-dtsi-enable-ahci-sata-on-imx6q-platforms.patch
0008-ahci_imx-depend-on-CONFIG_MFD_SYSCON.patch
0009-of-pci-Provide-support-for-parsing-PCI-DT-ranges-pro.patch
0010-ARM-imx6q-Add-PCIe-bits-to-GPR-syscon-definition.patch
0011-PCI-imx6-Add-support-for-i.MX6-PCIe-controller.patch
0012-ARM-imx-Add-LVDS-general-purpose-clocks-to-i.MX6Q.patch
0013-ARM-imx6q-clock-and-Kconfig-update-for-PCIe-support.patch
0014-ARM-dts-imx6qdl-add-pcie-device-node.patch
0015-thermal-add-imx-thermal-driver-support.patch
0019-regulator-pfuze100-add-pfuze100-regulator-driver.patch
0020-regulator-pfuze100-REGULATOR_PFUZE100-needs-to-selec.patch
0021-regulator-pfuze100-fix-build-warning-and-correct-the.patch
0022-regulator-pfuze100-add-MODULE_LICENSE-in-pfuze100-dr.patch
0023-regulator-pfuze100-Use-i2c_-set-get-_clientdata.patch
0024-regulator-pfuze100-Fix-module-alias-prefix.patch
0025-regulator-pfuze100-Use-regulator_map_voltage_ascend.patch
0026-regulator-pfuze100-Fix-n_voltages-setting-for-SW2-SW.patch
0027-regulator-pfuze100-Simplify-pfuze100_set_ramp_delay-.patch
0028-regulator-pfuze100-Fix-off-by-one-for-max_register-s.patch
0029-regulator-pfuze100-allow-misprogrammed-ID.patch
0030-pcie-designware-fix-io-transfers.patch
0031-PCI-imx6-init-must-be-early.patch
0032-PCI-imx6-fix-imprecise-abort-handler.patch
0033-PCI-imx6-increase-link-startup.patch
0034-PCI-imx6-add-support-for-legacy-irqs.patch
0050-sky2-allow-mac-to-come-from-dt.patch
0060-flexcan.patch
0061-can-flexcan-use-correct-clock-as-base-for-bit-rate-c.patch
010-pcie-backport-fixes.patch
100-bootargs.patch
110-gateworks-ventana.patch
120-ventana-init.ptach