From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= Subject: [PATCH 2/2] net: phy: pick Broadcom drivers updates from net-next for 4.11 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Rafał Miłecki --- --- a/drivers/net/phy/bcm7xxx.c +++ b/drivers/net/phy/bcm7xxx.c @@ -163,12 +163,43 @@ static int bcm7xxx_28nm_e0_plus_afe_conf return 0; } +static int bcm7xxx_28nm_a0_patch_afe_config_init(struct phy_device *phydev) +{ + /* +1 RC_CAL codes for RL centering for both LT and HT conditions */ + bcm_phy_write_misc(phydev, AFE_RXCONFIG_2, 0xd003); + + /* Cut master bias current by 2% to compensate for RC_CAL offset */ + bcm_phy_write_misc(phydev, DSP_TAP10, 0x791b); + + /* Improve hybrid leakage */ + bcm_phy_write_misc(phydev, AFE_HPF_TRIM_OTHERS, 0x10e3); + + /* Change rx_on_tune 8 to 0xf */ + bcm_phy_write_misc(phydev, 0x21, 0x2, 0x87f6); + + /* Change 100Tx EEE bandwidth */ + bcm_phy_write_misc(phydev, 0x22, 0x2, 0x017d); + + /* Enable ffe zero detection for Vitesse interoperability */ + bcm_phy_write_misc(phydev, 0x26, 0x2, 0x0015); + + r_rc_cal_reset(phydev); + + return 0; +} + static int bcm7xxx_28nm_config_init(struct phy_device *phydev) { u8 rev = PHY_BRCM_7XXX_REV(phydev->dev_flags); u8 patch = PHY_BRCM_7XXX_PATCH(phydev->dev_flags); int ret = 0; + /* Newer devices have moved the revision information back into a + * standard location in MII_PHYS_ID[23] + */ + if (rev == 0) + rev = phydev->phy_id & ~phydev->drv->phy_id_mask; + pr_info_once("%s: %s PHY revision: 0x%02x, patch: %d\n", dev_name(&phydev->dev), phydev->drv->name, rev, patch); @@ -192,6 +223,9 @@ static int bcm7xxx_28nm_config_init(stru case 0x10: ret = bcm7xxx_28nm_e0_plus_afe_config_init(phydev); break; + case 0x01: + ret = bcm7xxx_28nm_a0_patch_afe_config_init(phydev); + break; default: break; } @@ -336,6 +370,7 @@ static int bcm7xxx_suspend(struct phy_de static struct phy_driver bcm7xxx_driver[] = { BCM7XXX_28NM_GPHY(PHY_ID_BCM7250, "Broadcom BCM7250"), + BCM7XXX_28NM_GPHY(PHY_ID_BCM7278, "Broadcom BCM7278"), BCM7XXX_28NM_GPHY(PHY_ID_BCM7364, "Broadcom BCM7364"), BCM7XXX_28NM_GPHY(PHY_ID_BCM7366, "Broadcom BCM7366"), BCM7XXX_28NM_GPHY(PHY_ID_BCM7439, "Broadcom BCM7439"), @@ -350,6 +385,7 @@ static struct phy_driver bcm7xxx_driver[ static struct mdio_device_id __maybe_unused bcm7xxx_tbl[] = { { PHY_ID_BCM7250, 0xfffffff0, }, + { PHY_ID_BCM7278, 0xfffffff0, }, { PHY_ID_BCM7364, 0xfffffff0, }, { PHY_ID_BCM7366, 0xfffffff0, }, { PHY_ID_BCM7346, 0xfffffff0, }, --- a/drivers/net/phy/broadcom.c +++ b/drivers/net/phy/broadcom.c @@ -30,6 +30,22 @@ MODULE_DESCRIPTION("Broadcom PHY driver" MODULE_AUTHOR("Maciej W. Rozycki"); MODULE_LICENSE("GPL"); +static int bcm54210e_config_init(struct phy_device *phydev) +{ + int val; + + val = bcm54xx_auxctl_read(phydev, MII_BCM54XX_AUXCTL_SHDWSEL_MISC); + val &= ~MII_BCM54XX_AUXCTL_SHDWSEL_MISC_RGMII_SKEW_EN; + val |= MII_BCM54XX_AUXCTL_MISC_WREN; + bcm54xx_auxctl_write(phydev, MII_BCM54XX_AUXCTL_SHDWSEL_MISC, val); + + val = bcm_phy_read_shadow(phydev, BCM54810_SHD_CLK_CTL); + val &= ~BCM54810_SHD_CLK_CTL_GTXCLK_EN; + bcm_phy_write_shadow(phydev, BCM54810_SHD_CLK_CTL, val); + + return 0; +} + static int bcm54810_config(struct phy_device *phydev) { int rc, val; @@ -230,7 +246,11 @@ static int bcm54xx_config_init(struct ph (phydev->dev_flags & PHY_BRCM_AUTO_PWRDWN_ENABLE)) bcm54xx_adjust_rxrefclk(phydev); - if (BRCM_PHY_MODEL(phydev) == PHY_ID_BCM54810) { + if (BRCM_PHY_MODEL(phydev) == PHY_ID_BCM54210E) { + err = bcm54210e_config_init(phydev); + if (err) + return err; + } else if (BRCM_PHY_MODEL(phydev) == PHY_ID_BCM54810) { err = bcm54810_config(phydev); if (err) return err; @@ -395,12 +415,10 @@ static int bcm54612e_config_aneg(struct (phydev->interface != PHY_INTERFACE_MODE_RGMII_RXID)) { u16 reg; - /* Errata: reads require filling in the write selector field */ - bcm54xx_auxctl_write(phydev, MII_BCM54XX_AUXCTL_SHDWSEL_MISC, - MII_BCM54XX_AUXCTL_MISC_RDSEL_MISC); - reg = phy_read(phydev, MII_BCM54XX_AUX_CTL); + reg = bcm54xx_auxctl_read(phydev, + MII_BCM54XX_AUXCTL_SHDWSEL_MISC); /* Disable RXD to RXC delay (default set) */ - reg &= ~MII_BCM54XX_AUXCTL_MISC_RXD_RXC_SKEW; + reg &= ~MII_BCM54XX_AUXCTL_SHDWSEL_MISC_RGMII_SKEW_EN; /* Clear shadow selector field */ reg &= ~MII_BCM54XX_AUXCTL_SHDWSEL_MASK; bcm54xx_auxctl_write(phydev, MII_BCM54XX_AUXCTL_SHDWSEL_MISC, @@ -548,6 +566,17 @@ static struct phy_driver broadcom_driver .config_intr = bcm_phy_config_intr, .driver = { .owner = THIS_MODULE }, }, { + .phy_id = PHY_ID_BCM54210E, + .phy_id_mask = 0xfffffff0, + .name = "Broadcom BCM54210E", + .features = PHY_GBIT_FEATURES, + .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT, + .config_init = bcm54xx_config_init, + .config_aneg = genphy_config_aneg, + .read_status = genphy_read_status, + .ack_interrupt = bcm_phy_ack_intr, + .config_intr = bcm_phy_config_intr, +}, { .phy_id = PHY_ID_BCM5461, .phy_id_mask = 0xfffffff0, .name = "Broadcom BCM5461", @@ -708,6 +737,7 @@ module_phy_driver(broadcom_drivers); static struct mdio_device_id __maybe_unused broadcom_tbl[] = { { PHY_ID_BCM5411, 0xfffffff0 }, { PHY_ID_BCM5421, 0xfffffff0 }, + { PHY_ID_BCM54210E, 0xfffffff0 }, { PHY_ID_BCM5461, 0xfffffff0 }, { PHY_ID_BCM54612E, 0xfffffff0 }, { PHY_ID_BCM54616S, 0xfffffff0 }, --- a/include/linux/brcmphy.h +++ b/include/linux/brcmphy.h @@ -17,6 +17,7 @@ #define PHY_ID_BCM5482 0x0143bcb0 #define PHY_ID_BCM5411 0x00206070 #define PHY_ID_BCM5421 0x002060e0 +#define PHY_ID_BCM54210E 0x600d84a0 #define PHY_ID_BCM5464 0x002060b0 #define PHY_ID_BCM5461 0x002060c0 #define PHY_ID_BCM54612E 0x03625e60 @@ -24,6 +25,7 @@ #define PHY_ID_BCM57780 0x03625d90 #define PHY_ID_BCM7250 0xae025280 +#define PHY_ID_BCM7278 0xae0251a0 #define PHY_ID_BCM7364 0xae025260 #define PHY_ID_BCM7366 0x600d8490 #define PHY_ID_BCM7346 0x600d8650 @@ -103,18 +105,17 @@ /* * AUXILIARY CONTROL SHADOW ACCESS REGISTERS. (PHY REG 0x18) */ -#define MII_BCM54XX_AUXCTL_SHDWSEL_AUXCTL 0x0000 +#define MII_BCM54XX_AUXCTL_SHDWSEL_AUXCTL 0x00 #define MII_BCM54XX_AUXCTL_ACTL_TX_6DB 0x0400 #define MII_BCM54XX_AUXCTL_ACTL_SMDSP_ENA 0x0800 -#define MII_BCM54XX_AUXCTL_MISC_WREN 0x8000 -#define MII_BCM54XX_AUXCTL_MISC_RXD_RXC_SKEW 0x0100 -#define MII_BCM54XX_AUXCTL_MISC_FORCE_AMDIX 0x0200 -#define MII_BCM54XX_AUXCTL_MISC_RDSEL_MISC 0x7000 -#define MII_BCM54XX_AUXCTL_SHDWSEL_MISC 0x0007 -#define MII_BCM54XX_AUXCTL_SHDWSEL_READ_SHIFT 12 -#define MII_BCM54XX_AUXCTL_SHDWSEL_MISC_RGMII_SKEW_EN (1 << 8) +#define MII_BCM54XX_AUXCTL_SHDWSEL_MISC 0x07 +#define MII_BCM54XX_AUXCTL_SHDWSEL_MISC_WIRESPEED_EN 0x0010 +#define MII_BCM54XX_AUXCTL_SHDWSEL_MISC_RGMII_SKEW_EN 0x0100 +#define MII_BCM54XX_AUXCTL_MISC_FORCE_AMDIX 0x0200 +#define MII_BCM54XX_AUXCTL_MISC_WREN 0x8000 +#define MII_BCM54XX_AUXCTL_SHDWSEL_READ_SHIFT 12 #define MII_BCM54XX_AUXCTL_SHDWSEL_MASK 0x0007 /*