From 33ec0b53befff2c0a7f3aa19ff08556d60585d6b Mon Sep 17 00:00:00 2001 From: Andrew Lunn Date: Mon, 29 May 2023 18:32:39 +0200 Subject: [PATCH 09/13] leds: trigger: netdev: validate configured netdev The netdev which the LED should blink for is configurable in /sys/class/led/foo/device_name. Ensure when offloading that the configured netdev is the same as the netdev the LED is associated with. If it is not, only perform software blinking. Signed-off-by: Andrew Lunn Signed-off-by: Christian Marangi Signed-off-by: David S. Miller --- drivers/leds/trigger/ledtrig-netdev.c | 24 ++++++++++++++++++++++-- 1 file changed, 22 insertions(+), 2 deletions(-) --- a/drivers/leds/trigger/ledtrig-netdev.c +++ b/drivers/leds/trigger/ledtrig-netdev.c @@ -110,6 +110,24 @@ static bool supports_hw_control(struct l return !strcmp(led_cdev->hw_control_trigger, led_cdev->trigger->name); } +/* + * Validate the configured netdev is the same as the one associated with + * the LED driver in hw control. + */ +static bool validate_net_dev(struct led_classdev *led_cdev, + struct net_device *net_dev) +{ + struct device *dev = led_cdev->hw_control_get_device(led_cdev); + struct net_device *ndev; + + if (!dev) + return false; + + ndev = to_net_dev(dev); + + return ndev == net_dev; +} + static bool can_hw_control(struct led_netdev_data *trigger_data) { unsigned long default_interval = msecs_to_jiffies(NETDEV_LED_DEFAULT_INTERVAL); @@ -131,9 +149,11 @@ static bool can_hw_control(struct led_ne /* * net_dev must be set with hw control, otherwise no * blinking can be happening and there is nothing to - * offloaded. + * offloaded. Additionally, for hw control to be + * valid, the configured netdev must be the same as + * netdev associated to the LED. */ - if (!trigger_data->net_dev) + if (!validate_net_dev(led_cdev, trigger_data->net_dev)) return false; /* Check if the requested mode is supported */