From 36152f87dda4af221b16258751451d9cd3d0fb0b Mon Sep 17 00:00:00 2001 From: Frank Sae Date: Thu, 2 Feb 2023 11:00:36 +0800 Subject: [PATCH] net: phy: Add dts support for Motorcomm yt8531s gigabit ethernet phy Add dts support for Motorcomm yt8531s gigabit ethernet phy. Change yt8521_probe to support clk config of yt8531s. Becase yt8521_probe does the things which yt8531s is needed, so removed yt8531s function. This patch has been verified on AM335x platform with yt8531s board. Signed-off-by: Frank Sae Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller --- drivers/net/phy/motorcomm.c | 51 ++++++++++++++++++++----------------- 1 file changed, 27 insertions(+), 24 deletions(-) --- a/drivers/net/phy/motorcomm.c +++ b/drivers/net/phy/motorcomm.c @@ -258,8 +258,6 @@ #define YT8531_SCR_CLK_SRC_CLOCK_FROM_DIGITAL 3 #define YT8531_SCR_CLK_SRC_REF_25M 4 #define YT8531_SCR_CLK_SRC_SSC_25M 5 -#define YT8531S_SYNCE_CFG_REG 0xA012 -#define YT8531S_SCR_SYNCE_ENABLE BIT(6) /* Extended Register end */ @@ -858,7 +856,32 @@ static int yt8521_probe(struct phy_devic return -EINVAL; } } else if (phydev->drv->phy_id == PHY_ID_YT8531S) { - return 0; + switch (freq) { + case YTPHY_DTS_OUTPUT_CLK_DIS: + mask = YT8531_SCR_SYNCE_ENABLE; + val = 0; + break; + case YTPHY_DTS_OUTPUT_CLK_25M: + mask = YT8531_SCR_SYNCE_ENABLE | + YT8531_SCR_CLK_SRC_MASK | + YT8531_SCR_CLK_FRE_SEL_125M; + val = YT8531_SCR_SYNCE_ENABLE | + FIELD_PREP(YT8531_SCR_CLK_SRC_MASK, + YT8531_SCR_CLK_SRC_REF_25M); + break; + case YTPHY_DTS_OUTPUT_CLK_125M: + mask = YT8531_SCR_SYNCE_ENABLE | + YT8531_SCR_CLK_SRC_MASK | + YT8531_SCR_CLK_FRE_SEL_125M; + val = YT8531_SCR_SYNCE_ENABLE | + YT8531_SCR_CLK_FRE_SEL_125M | + FIELD_PREP(YT8531_SCR_CLK_SRC_MASK, + YT8531_SCR_CLK_SRC_PLL_125M); + break; + default: + phydev_warn(phydev, "Freq err:%u\n", freq); + return -EINVAL; + } } else { phydev_warn(phydev, "PHY id err\n"); return -EINVAL; @@ -869,26 +892,6 @@ static int yt8521_probe(struct phy_devic } /** - * yt8531s_probe() - read chip config then set suitable polling_mode - * @phydev: a pointer to a &struct phy_device - * - * returns 0 or negative errno code - */ -static int yt8531s_probe(struct phy_device *phydev) -{ - int ret; - - /* Disable SyncE clock output by default */ - ret = ytphy_modify_ext_with_lock(phydev, YT8531S_SYNCE_CFG_REG, - YT8531S_SCR_SYNCE_ENABLE, 0); - if (ret < 0) - return ret; - - /* same as yt8521_probe */ - return yt8521_probe(phydev); -} - -/** * ytphy_utp_read_lpa() - read LPA then setup lp_advertising for utp * @phydev: a pointer to a &struct phy_device * @@ -1970,7 +1973,7 @@ static struct phy_driver motorcomm_phy_d PHY_ID_MATCH_EXACT(PHY_ID_YT8531S), .name = "YT8531S Gigabit Ethernet", .get_features = yt8521_get_features, - .probe = yt8531s_probe, + .probe = yt8521_probe, .read_page = yt8521_read_page, .write_page = yt8521_write_page, .get_wol = ytphy_get_wol,