From 0ccf8511182436183c031e8a2f740ae91a02c625 Mon Sep 17 00:00:00 2001 From: Ansuel Smith Date: Tue, 14 Sep 2021 14:33:45 +0200 Subject: net: phy: at803x: add support for qca 8327 internal phy Add support for qca8327 internal phy needed for correct init of the switch port. It does use the same qca8337 function and reg just with a different id. Signed-off-by: Ansuel Smith Tested-by: Rosen Penev Tested-by: Andrew Lunn Signed-off-by: David S. Miller --- drivers/net/phy/at803x.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+) --- a/drivers/net/phy/at803x.c +++ b/drivers/net/phy/at803x.c @@ -1410,6 +1410,19 @@ static struct phy_driver at803x_driver[] .get_sset_count = at803x_get_sset_count, .get_strings = at803x_get_strings, .get_stats = at803x_get_stats, +}, { + /* QCA8327 */ + .phy_id = QCA8327_PHY_ID, + .phy_id_mask = QCA8K_PHY_ID_MASK, + .name = "QCA PHY 8327", + /* PHY_GBIT_FEATURES */ + .probe = at803x_probe, + .flags = PHY_IS_INTERNAL, + .config_init = qca83xx_config_init, + .soft_reset = genphy_soft_reset, + .get_sset_count = at803x_get_sset_count, + .get_strings = at803x_get_strings, + .get_stats = at803x_get_stats, }, }; module_phy_driver(at803x_driver); @@ -1420,6 +1433,8 @@ static struct mdio_device_id __maybe_unu { PHY_ID_MATCH_EXACT(ATH8032_PHY_ID) }, { PHY_ID_MATCH_EXACT(ATH8035_PHY_ID) }, { PHY_ID_MATCH_EXACT(ATH9331_PHY_ID) }, + { PHY_ID_MATCH_EXACT(QCA8337_PHY_ID) }, + { PHY_ID_MATCH_EXACT(QCA8327_PHY_ID) }, { } };