From 429a0edeefd88cbfca5c417dfb8561047bb50769 Mon Sep 17 00:00:00 2001 From: DENG Qingfang Date: Mon, 25 Jan 2021 12:43:22 +0800 Subject: [PATCH] net: dsa: mt7530: MT7530 optional GPIO support MT7530's LED controller can drive up to 15 LED/GPIOs. Add support for GPIO control and allow users to use its GPIOs by setting gpio-controller property in device tree. Signed-off-by: DENG Qingfang Reviewed-by: Linus Walleij Reviewed-by: Andrew Lunn Signed-off-by: Jakub Kicinski --- drivers/net/dsa/mt7530.c | 110 +++++++++++++++++++++++++++++++++++++++ drivers/net/dsa/mt7530.h | 20 +++++++ 2 files changed, 130 insertions(+) --- a/drivers/net/dsa/mt7530.c +++ b/drivers/net/dsa/mt7530.c @@ -18,6 +18,7 @@ #include #include #include +#include #include #include "mt7530.h" @@ -1534,6 +1535,109 @@ mtk_get_tag_protocol(struct dsa_switch * } } +static inline u32 +mt7530_gpio_to_bit(unsigned int offset) +{ + /* Map GPIO offset to register bit + * [ 2: 0] port 0 LED 0..2 as GPIO 0..2 + * [ 6: 4] port 1 LED 0..2 as GPIO 3..5 + * [10: 8] port 2 LED 0..2 as GPIO 6..8 + * [14:12] port 3 LED 0..2 as GPIO 9..11 + * [18:16] port 4 LED 0..2 as GPIO 12..14 + */ + return BIT(offset + offset / 3); +} + +static int +mt7530_gpio_get(struct gpio_chip *gc, unsigned int offset) +{ + struct mt7530_priv *priv = gpiochip_get_data(gc); + u32 bit = mt7530_gpio_to_bit(offset); + + return !!(mt7530_read(priv, MT7530_LED_GPIO_DATA) & bit); +} + +static void +mt7530_gpio_set(struct gpio_chip *gc, unsigned int offset, int value) +{ + struct mt7530_priv *priv = gpiochip_get_data(gc); + u32 bit = mt7530_gpio_to_bit(offset); + + if (value) + mt7530_set(priv, MT7530_LED_GPIO_DATA, bit); + else + mt7530_clear(priv, MT7530_LED_GPIO_DATA, bit); +} + +static int +mt7530_gpio_get_direction(struct gpio_chip *gc, unsigned int offset) +{ + struct mt7530_priv *priv = gpiochip_get_data(gc); + u32 bit = mt7530_gpio_to_bit(offset); + + return (mt7530_read(priv, MT7530_LED_GPIO_DIR) & bit) ? + GPIO_LINE_DIRECTION_OUT : GPIO_LINE_DIRECTION_IN; +} + +static int +mt7530_gpio_direction_input(struct gpio_chip *gc, unsigned int offset) +{ + struct mt7530_priv *priv = gpiochip_get_data(gc); + u32 bit = mt7530_gpio_to_bit(offset); + + mt7530_clear(priv, MT7530_LED_GPIO_OE, bit); + mt7530_clear(priv, MT7530_LED_GPIO_DIR, bit); + + return 0; +} + +static int +mt7530_gpio_direction_output(struct gpio_chip *gc, unsigned int offset, int value) +{ + struct mt7530_priv *priv = gpiochip_get_data(gc); + u32 bit = mt7530_gpio_to_bit(offset); + + mt7530_set(priv, MT7530_LED_GPIO_DIR, bit); + + if (value) + mt7530_set(priv, MT7530_LED_GPIO_DATA, bit); + else + mt7530_clear(priv, MT7530_LED_GPIO_DATA, bit); + + mt7530_set(priv, MT7530_LED_GPIO_OE, bit); + + return 0; +} + +static int +mt7530_setup_gpio(struct mt7530_priv *priv) +{ + struct device *dev = priv->dev; + struct gpio_chip *gc; + + gc = devm_kzalloc(dev, sizeof(*gc), GFP_KERNEL); + if (!gc) + return -ENOMEM; + + mt7530_write(priv, MT7530_LED_GPIO_OE, 0); + mt7530_write(priv, MT7530_LED_GPIO_DIR, 0); + mt7530_write(priv, MT7530_LED_IO_MODE, 0); + + gc->label = "mt7530"; + gc->parent = dev; + gc->owner = THIS_MODULE; + gc->get_direction = mt7530_gpio_get_direction; + gc->direction_input = mt7530_gpio_direction_input; + gc->direction_output = mt7530_gpio_direction_output; + gc->get = mt7530_gpio_get; + gc->set = mt7530_gpio_set; + gc->base = -1; + gc->ngpio = 15; + gc->can_sleep = true; + + return devm_gpiochip_add_data(dev, gc, priv); +} + static int mt7530_setup(struct dsa_switch *ds) { @@ -1676,6 +1780,12 @@ mt7530_setup(struct dsa_switch *ds) } } + if (of_property_read_bool(priv->dev->of_node, "gpio-controller")) { + ret = mt7530_setup_gpio(priv); + if (ret) + return ret; + } + mt7530_setup_port5(ds, interface); /* Flush the FDB table */ --- a/drivers/net/dsa/mt7530.h +++ b/drivers/net/dsa/mt7530.h @@ -529,6 +529,26 @@ enum mt7531_clk_skew { #define MT7531_GPIO12_RG_RXD3_MASK GENMASK(19, 16) #define MT7531_EXT_P_MDIO_12 (2 << 16) +/* Registers for LED GPIO control (MT7530 only) + * All registers follow this pattern: + * [ 2: 0] port 0 + * [ 6: 4] port 1 + * [10: 8] port 2 + * [14:12] port 3 + * [18:16] port 4 + */ + +/* LED enable, 0: Disable, 1: Enable (Default) */ +#define MT7530_LED_EN 0x7d00 +/* LED mode, 0: GPIO mode, 1: PHY mode (Default) */ +#define MT7530_LED_IO_MODE 0x7d04 +/* GPIO direction, 0: Input, 1: Output */ +#define MT7530_LED_GPIO_DIR 0x7d10 +/* GPIO output enable, 0: Disable, 1: Enable */ +#define MT7530_LED_GPIO_OE 0x7d14 +/* GPIO value, 0: Low, 1: High */ +#define MT7530_LED_GPIO_DATA 0x7d18 + #define MT7530_CREV 0x7ffc #define CHIP_NAME_SHIFT 16 #define MT7530_ID 0x7530