From 2355a6546a053b1c16ebefd6ce1f0cccc00e1da5 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= Date: Thu, 12 Oct 2017 10:21:25 +0200 Subject: [PATCH] net: phy: broadcom: support new device flag for setting master mode MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Some of Broadcom's PHYs run by default in slave mode with Automatic Slave/Master configuration disabled. It stops them from working properly with some devices. So far it has been verified for BCM54210E and BCM50212E which don't work well with Intel's I217-LM and I218-LM: http://ark.intel.com/products/60019/Intel-Ethernet-Connection-I217-LM http://ark.intel.com/products/71307/Intel-Ethernet-Connection-I218-LM I was told there is massive ping loss. This commit adds support for a new flag which can be set by an ethernet driver to fixup PHY setup. Signed-off-by: Rafał Miłecki Signed-off-by: David S. Miller --- drivers/net/phy/broadcom.c | 6 ++++++ include/linux/brcmphy.h | 1 + 2 files changed, 7 insertions(+) --- a/drivers/net/phy/broadcom.c +++ b/drivers/net/phy/broadcom.c @@ -43,6 +43,12 @@ static int bcm54210e_config_init(struct val &= ~BCM54810_SHD_CLK_CTL_GTXCLK_EN; bcm_phy_write_shadow(phydev, BCM54810_SHD_CLK_CTL, val); + if (phydev->dev_flags & PHY_BRCM_EN_MASTER_MODE) { + val = phy_read(phydev, MII_CTRL1000); + val |= CTL1000_AS_MASTER | CTL1000_ENABLE_MASTER; + phy_write(phydev, MII_CTRL1000, val); + } + return 0; } --- a/include/linux/brcmphy.h +++ b/include/linux/brcmphy.h @@ -59,6 +59,7 @@ #define PHY_BRCM_EXT_IBND_TX_ENABLE 0x00002000 #define PHY_BRCM_CLEAR_RGMII_MODE 0x00004000 #define PHY_BRCM_DIS_TXCRXC_NOENRGY 0x00008000 +#define PHY_BRCM_EN_MASTER_MODE 0x00010000 /* Broadcom BCM7xxx specific workarounds */ #define PHY_BRCM_7XXX_REV(x) (((x) >> 8) & 0xff)