From f0674df220f3da81c173025636a904b395cf8f8b Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Sun, 19 Nov 2017 10:46:16 +0100 Subject: [PATCH 12/31] ARM: dts: Add ethernet PHYs to the a bunch of Geminis These Gemini boards have Ethernet PHY on GPIO bit-banged MDIO, clearly defined in the corresponding OpenWRT ethernet patches since ages. Add them in accordance with the OpenWRT patch so we can use them when we add ethernet support. Reviewed-by: Andrew Lunn Signed-off-by: Linus Walleij --- arch/arm/boot/dts/gemini-nas4220b.dts | 13 +++++++++++++ arch/arm/boot/dts/gemini-rut1xx.dts | 13 +++++++++++++ arch/arm/boot/dts/gemini-wbd111.dts | 13 +++++++++++++ arch/arm/boot/dts/gemini-wbd222.dts | 18 ++++++++++++++++++ 4 files changed, 57 insertions(+) --- a/arch/arm/boot/dts/gemini-nas4220b.dts +++ b/arch/arm/boot/dts/gemini-nas4220b.dts @@ -64,6 +64,19 @@ }; }; + mdio0: ethernet-phy { + compatible = "virtual,mdio-gpio"; + gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */ + <&gpio0 21 GPIO_ACTIVE_HIGH>; /* MDIO */ + #address-cells = <1>; + #size-cells = <0>; + + phy0: ethernet-phy@1 { + reg = <1>; + device_type = "ethernet-phy"; + }; + }; + soc { flash@30000000 { status = "okay"; --- a/arch/arm/boot/dts/gemini-rut1xx.dts +++ b/arch/arm/boot/dts/gemini-rut1xx.dts @@ -58,6 +58,19 @@ }; }; + mdio0: ethernet-phy { + compatible = "virtual,mdio-gpio"; + gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */ + <&gpio0 21 GPIO_ACTIVE_HIGH>; /* MDIO */ + #address-cells = <1>; + #size-cells = <0>; + + phy0: ethernet-phy@1 { + reg = <1>; + device_type = "ethernet-phy"; + }; + }; + soc { flash@30000000 { status = "okay"; --- a/arch/arm/boot/dts/gemini-wbd111.dts +++ b/arch/arm/boot/dts/gemini-wbd111.dts @@ -69,6 +69,19 @@ }; }; + mdio0: ethernet-phy { + compatible = "virtual,mdio-gpio"; + gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */ + <&gpio0 21 GPIO_ACTIVE_HIGH>; /* MDIO */ + #address-cells = <1>; + #size-cells = <0>; + + phy0: ethernet-phy@1 { + reg = <1>; + device_type = "ethernet-phy"; + }; + }; + soc { flash@30000000 { status = "okay"; --- a/arch/arm/boot/dts/gemini-wbd222.dts +++ b/arch/arm/boot/dts/gemini-wbd222.dts @@ -69,6 +69,24 @@ }; }; + mdio0: ethernet-phy { + compatible = "virtual,mdio-gpio"; + gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */ + <&gpio0 21 GPIO_ACTIVE_HIGH>; /* MDIO */ + #address-cells = <1>; + #size-cells = <0>; + + phy0: ethernet-phy@1 { + reg = <1>; + device_type = "ethernet-phy"; + }; + + phy1: ethernet-phy@3 { + reg = <3>; + device_type = "ethernet-phy"; + }; + }; + soc { flash@30000000 { status = "okay";