From: "mexit@o2.pl" Date: Sun, 24 Nov 2013 21:33:38 +0000 Subject: [PATCH 4/5] brcm63xx: add support for Asmax AR 1004g router Support for Asmax AR 1004g router Signed-off-by: Adrian Feliks --- --- a/arch/mips/bcm63xx/boards/board_bcm963xx.c +++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c @@ -1424,6 +1424,51 @@ static struct board_info __initdata boar }, }; +static struct board_info __initdata board_96348gw_10_AR1004G = { + .name = "AR1004G", + .expected_cpu_id = 0x6348, + + .has_uart0 = 1, + .has_enet1 = 1, + .has_pci = 1, + + .enet1 = { + .has_phy = 1, + .phy_id = 0, + .force_speed_100 = 1, + .force_duplex_full = 1, + }, + + .leds = { + { + .name = "AR1004G:green:inet", + .gpio = 3, + .active_low = 1, + }, + { + .name = "AR1004G:green:power", + .gpio = 0, + .active_low = 1, + }, + { + .name = "AR1004G:red:power", + .gpio = 6, + .active_low = 1, + }, + }, + + .buttons = { + { + .desc = "reset", + .gpio = 33, + .active_low = 1, + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL, + }, + }, +}; + /* BT Voyager 2110 */ static struct board_info __initdata board_V2110 = { @@ -4221,6 +4266,7 @@ static const struct board_info __initcon &board_96348A_122, &board_CPVA502plus, &board_96348W3, + &board_96348gw_10_AR1004G, #endif #ifdef CONFIG_BCM63XX_CPU_6358 @@ -4277,6 +4323,7 @@ static struct of_device_id const bcm963x { .compatible = "brcm,bcm96345gw2", .data = &board_96345gw2, }, #endif #ifdef CONFIG_BCM63XX_CPU_6348 + { .compatible = "asmax,ar1004g", .data = &board_96348gw_10_AR1004G, }, { .compatible = "brcm,bcm96348r", .data = &board_96348r, }, { .compatible = "brcm,bcm96348gw-10", .data = &board_96348gw_10, }, { .compatible = "brcm,bcm96348gw-11", .data = &board_96348gw_11, },