--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c +++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c @@ -401,6 +401,62 @@ static struct board_info __initdata boar }, }; + +/* BT Voyager 2110 */ +static struct board_info __initdata board_V2110 = { + .name = "V2110", + .expected_cpu_id = 0x6348, + + .has_uart0 = 1, + .has_enet1 = 1, + .has_pci = 1, + + .enet1 = { + .force_speed_100 = 1, + .force_duplex_full = 1, + }, + + .leds = { + { + .name = "V2110:green:power", + .gpio = 0, + .active_low = 1, + .default_trigger = "default-on", + }, + { + .name = "V2110:red:power", + .gpio = 1, + .active_low = 1, + }, + { + .name = "V2110:green:adsl", + .gpio = 2, + .active_low = 1, + }, + { .name = "V2110:green:ppp", + .gpio = 3, + .active_low = 1, + }, + { + .name = "V2110:green:wireless", + .gpio = 6, + .active_low = 1, + }, + }, + + .buttons = { + { + .desc = "reset", + .gpio = 33, + .active_low = 1, + .type = EV_KEY, + .code = KEY_RESTART, + .threshold = 3, + }, + }, +}; + + static struct board_info __initdata board_96348gw = { .name = "96348GW", .expected_cpu_id = 0x6348, @@ -1969,6 +2025,7 @@ static const struct board_info __initdat &board_spw500v, &board_96348sv, &board_V2500V_BB, + &board_V2110, #endif #ifdef CONFIG_BCM63XX_CPU_6358 switch'/> upstream openwrtJames
aboutsummaryrefslogtreecommitdiffstats
path: root/toolchain/Makefile
blob: 456b731fb88d540d2ec57287b180394deb449f26 (plain) 
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71

# 
# Copyright (C) 2007-2008 OpenWrt.org
#
# This is free software, licensed under the GNU General Public License v2.
# See /LICENSE for more information.
#
# Main makefile for the toolchain
#
# Steps:
# 1) toolchain/binutils/install
#    build & install binutils
# 2) toolchain/gcc/prepare
#    build & install a minimal gcc, needed for steps 3 & 4
# 3) toolchain/kernel-headers/install
#    install kernel headers, needed for step 4
# 4) toolchain/libc/prepare
#    build & install libc headers & support files, needed for step 5
# 5) toolchain/gcc/compile
#    build & install an initial gcc, needed for step 6
# 6) toolchain/libc/compile
#    build & install the final libc
# 7) toolchain/gcc/install
#    build & install the final gcc
# 8) toolchain/libc/install
#    build & install libc utilities
#

curdir:=toolchain

# subdirectories to descend into
$(curdir)/builddirs := kernel-headers $(if $(CONFIG_GDB),gdb) $(if $(CONFIG_INSIGHT),insight) $(if $(CONFIG_NATIVE_TOOLCHAIN),,binutils gcc $(LIBC) $(if $(CONFIG_GLIBC_PORTS),glibc-ports))
$(curdir)/builddirs-compile:=$($(curdir)/builddirs-prepare)
$(curdir)/builddirs-install:=$($(curdir)/builddirs-compile)

# builddir dependencies
$(curdir)/$(LIBC)/prepare:=$(curdir)/kernel-headers/install
ifeq ($(CONFIG_NATIVE_TOOLCHAIN),)
  $(curdir)/gcc/prepare:=$(curdir)/binutils/install
  $(curdir)/kernel-headers/install:=$(curdir)/gcc/prepare
  $(curdir)/gcc/compile:=$(curdir)/$(LIBC)/prepare
  $(curdir)/$(LIBC)/compile:=$(curdir)/gcc/compile
  $(curdir)/gcc/install:=$(curdir)/$(LIBC)/compile
  $(curdir)/$(LIBC)/install:=$(curdir)/gcc/install
  ifneq ($(CONFIG_GLIBC_PORTS),)
    $(curdir)/glibc/prepare:=$(curdir)/glibc-ports/prepare
  endif
endif

ifneq ($(ARCH),)
  $(TOOLCHAIN_DIR)/info.mk: .config
	@for dir in $(TOOLCHAIN_DIR); do ( \
		set -x; \
		mkdir -p "$$dir"; \
		cd "$$dir"; \
		mkdir -p stamp lib usr/include usr/lib ; \
	); done
	@grep GCC_VERSION $@ >/dev/null 2>&1 || $(INSTALL_DATA) $(TOPDIR)/toolchain/info.mk $@
	@touch $@
endif

# prerequisites for the individual targets
$(curdir)/ := .config prereq
$(curdir)//prepare = $(STAGING_DIR)/.prepared $(TOOLCHAIN_DIR)/info.mk
$(curdir)//compile = $(1)/prepare
$(curdir)//install = $(1)/compile

$(TOOLCHAIN_DIR)/stamp/.gcc-initial_installed:

$(eval $(call stampfile,$(curdir),toolchain,install,$(TOOLCHAIN_DIR)/stamp/.gcc-initial_installed,,$(TOOLCHAIN_DIR)))
$(eval $(call subdir,$(curdir)))