/dts-v1/;

#include "bcm6328.dtsi"

#include <dt-bindings/input/input.h>

/ {
	model = "Comtrend AR-5387un";
	compatible = "comtrend,ar-5387un", "brcm,bcm6328";

	chosen {
		bootargs = "root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
	};

	gpio-keys-polled {
		compatible = "gpio-keys-polled";
		#address-cells = <1>;
		#size-cells = <0>;
		poll-interval = <20>;
		debounce-interval = <60>;

		reset {
			label = "reset";
			gpios = <&pinctrl 23 1>;
			linux,code = <KEY_RESTART>;
		};
	};

	gpio-leds {
		compatible = "gpio-leds";

		inet_red {
			label = "AR-5387un:red:inet";
			gpios = <&pinctrl 1 0>;
		};
		power_red {
			label = "AR-5387un:red:power";
			gpios = <&pinctrl 4 0>;
		};
		inet_green {
			label = "AR-5387un:green:inet";
			gpios = <&pinctrl 7 0>;
		};
		power_green {
			label = "AR-5387un:green:power";
			gpios = <&pinctrl 8 0>;
			default-state = "on";
		};
		dsl_green {
			label = "AR-5387un:green:dsl";
			gpios = <&pinctrl 11 1>;
		};
	};
};

&hsspi {
	status = "ok";

	flash@0 {
		compatible = "jedec,spi-nor";
		spi-max-frequency = <16666667>;
		spi-tx-bus-width = <2>;
		spi-rx-bus-width = <2>;
		reg = <0>;

		#address-cells = <1>;
		#size-cells = <1>;

		linux,part-probe = "bcm63xxpart";

		cfe@0 {
			reg = <0x000000 0x010000>;
			label = "cfe";
			read-only;
		};

		linux@10000 {
			reg = <0x010000 0xfe0000>;
			label = "linux";
		};

		nvram@ff0000 {
			reg = <0xff0000 0x010000>;
			label = "nvram";
		};
	};
};