From a5cf7bed6a2d7267e2f0a3109807051e166930fb Mon Sep 17 00:00:00 2001 From: Phil Elwell Date: Mon, 5 Dec 2016 09:58:16 +0000 Subject: [PATCH] lirc_rpi: Delete vestigial gpio_in_pull parameter The RPi GPIO no longer support run-time "pull" settings - one should Device Tree and pinctrl instead - so remove the parameter to avoid confusion. See: https://github.com/raspberrypi/linux/issues/1711 Signed-off-by: Phil Elwell --- drivers/staging/media/lirc/lirc_rpi.c | 6 ------ 1 file changed, 6 deletions(-) --- a/drivers/staging/media/lirc/lirc_rpi.c +++ b/drivers/staging/media/lirc/lirc_rpi.c @@ -64,8 +64,6 @@ /* set the default GPIO input pin */ static int gpio_in_pin = 18; -/* set the default pull behaviour for input pin */ -static int gpio_in_pull = BCM2708_PULL_DOWN; /* set the default GPIO output pin */ static int gpio_out_pin = 17; /* enable debugging messages */ @@ -716,10 +714,6 @@ module_param(gpio_in_pin, int, S_IRUGO); MODULE_PARM_DESC(gpio_in_pin, "GPIO input pin number of the BCM processor." " (default 18"); -module_param(gpio_in_pull, int, S_IRUGO); -MODULE_PARM_DESC(gpio_in_pull, "GPIO input pin pull configuration." - " (0 = off, 1 = up, 2 = down, default down)"); - module_param(sense, int, S_IRUGO); MODULE_PARM_DESC(sense, "Override autodetection of IR receiver circuit" " (0 = active high, 1 = active low )");