From 2fe3ede60d3b88bb94ee1a100b5e771567db0962 Mon Sep 17 00:00:00 2001 From: Martin Sperl Date: Wed, 16 Mar 2016 12:24:57 -0700 Subject: [PATCH] dmaengine: bcm2835: add additional defines for DMA-registers Add additional defines describing the DMA registers as well as adding some more documentation to those registers. Signed-off-by: Martin Sperl Reviewed-by: Eric Anholt Signed-off-by: Eric Anholt Signed-off-by: Vinod Koul --- drivers/dma/bcm2835-dma.c | 57 ++++++++++++++++++++++++++++++++++++++++------- 1 file changed, 49 insertions(+), 8 deletions(-) --- a/drivers/dma/bcm2835-dma.c +++ b/drivers/dma/bcm2835-dma.c @@ -97,26 +97,67 @@ struct bcm2835_desc { #define BCM2835_DMA_CS 0x00 #define BCM2835_DMA_ADDR 0x04 +#define BCM2835_DMA_TI 0x08 #define BCM2835_DMA_SOURCE_AD 0x0c #define BCM2835_DMA_DEST_AD 0x10 -#define BCM2835_DMA_NEXTCB 0x1C +#define BCM2835_DMA_LEN 0x14 +#define BCM2835_DMA_STRIDE 0x18 +#define BCM2835_DMA_NEXTCB 0x1c +#define BCM2835_DMA_DEBUG 0x20 /* DMA CS Control and Status bits */ -#define BCM2835_DMA_ACTIVE BIT(0) -#define BCM2835_DMA_INT BIT(2) +#define BCM2835_DMA_ACTIVE BIT(0) /* activate the DMA */ +#define BCM2835_DMA_END BIT(1) /* current CB has ended */ +#define BCM2835_DMA_INT BIT(2) /* interrupt status */ +#define BCM2835_DMA_DREQ BIT(3) /* DREQ state */ #define BCM2835_DMA_ISPAUSED BIT(4) /* Pause requested or not active */ #define BCM2835_DMA_ISHELD BIT(5) /* Is held by DREQ flow control */ -#define BCM2835_DMA_ERR BIT(8) +#define BCM2835_DMA_WAITING_FOR_WRITES BIT(6) /* waiting for last + * AXI-write to ack + */ +#define BCM2835_DMA_ERR BIT(8) +#define BCM2835_DMA_PRIORITY(x) ((x & 15) << 16) /* AXI priority */ +#define BCM2835_DMA_PANIC_PRIORITY(x) ((x & 15) << 20) /* panic priority */ +/* current value of TI.BCM2835_DMA_WAIT_RESP */ +#define BCM2835_DMA_WAIT_FOR_WRITES BIT(28) +#define BCM2835_DMA_DIS_DEBUG BIT(29) /* disable debug pause signal */ #define BCM2835_DMA_ABORT BIT(30) /* Stop current CB, go to next, WO */ #define BCM2835_DMA_RESET BIT(31) /* WO, self clearing */ +/* Transfer information bits - also bcm2835_cb.info field */ #define BCM2835_DMA_INT_EN BIT(0) +#define BCM2835_DMA_TDMODE BIT(1) /* 2D-Mode */ +#define BCM2835_DMA_WAIT_RESP BIT(3) /* wait for AXI-write to be acked */ #define BCM2835_DMA_D_INC BIT(4) -#define BCM2835_DMA_D_DREQ BIT(6) +#define BCM2835_DMA_D_WIDTH BIT(5) /* 128bit writes if set */ +#define BCM2835_DMA_D_DREQ BIT(6) /* enable DREQ for destination */ +#define BCM2835_DMA_D_IGNORE BIT(7) /* ignore destination writes */ #define BCM2835_DMA_S_INC BIT(8) -#define BCM2835_DMA_S_DREQ BIT(10) +#define BCM2835_DMA_S_WIDTH BIT(9) /* 128bit writes if set */ +#define BCM2835_DMA_S_DREQ BIT(10) /* enable SREQ for source */ +#define BCM2835_DMA_S_IGNORE BIT(11) /* ignore source reads - read 0 */ +#define BCM2835_DMA_BURST_LENGTH(x) ((x & 15) << 12) +#define BCM2835_DMA_PER_MAP(x) ((x & 31) << 16) /* REQ source */ +#define BCM2835_DMA_WAIT(x) ((x & 31) << 21) /* add DMA-wait cycles */ +#define BCM2835_DMA_NO_WIDE_BURSTS BIT(26) /* no 2 beat write bursts */ -#define BCM2835_DMA_PER_MAP(x) ((x) << 16) +/* debug register bits */ +#define BCM2835_DMA_DEBUG_LAST_NOT_SET_ERR BIT(0) +#define BCM2835_DMA_DEBUG_FIFO_ERR BIT(1) +#define BCM2835_DMA_DEBUG_READ_ERR BIT(2) +#define BCM2835_DMA_DEBUG_OUTSTANDING_WRITES_SHIFT 4 +#define BCM2835_DMA_DEBUG_OUTSTANDING_WRITES_BITS 4 +#define BCM2835_DMA_DEBUG_ID_SHIFT 16 +#define BCM2835_DMA_DEBUG_ID_BITS 9 +#define BCM2835_DMA_DEBUG_STATE_SHIFT 16 +#define BCM2835_DMA_DEBUG_STATE_BITS 9 +#define BCM2835_DMA_DEBUG_VERSION_SHIFT 25 +#define BCM2835_DMA_DEBUG_VERSION_BITS 3 +#define BCM2835_DMA_DEBUG_LITE BIT(28) + +/* shared registers for all dma channels */ +#define BCM2835_DMA_INT_STATUS 0xfe0 +#define BCM2835_DMA_ENABLE 0xff0 #define BCM2835_DMA_DATA_TYPE_S8 1 #define BCM2835_DMA_DATA_TYPE_S16 2