From 5f0af4369aeb791f481e05447e1d4d05579367cd Mon Sep 17 00:00:00 2001 From: Phil Elwell Date: Mon, 7 Mar 2016 16:46:39 +0000 Subject: [PATCH] bcm2835-sdhost: Only claim one DMA channel With both MMC controllers enabled there are few DMA channels left. The bcm2835-sdhost driver only uses DMA in one direction at a time, so it doesn't need to claim two channels. See: https://github.com/raspberrypi/linux/issues/1327 Signed-off-by: Phil Elwell --- arch/arm/boot/dts/bcm2708_common.dtsi | 5 +-- drivers/mmc/host/bcm2835-sdhost.c | 70 ++++++++++++++++++++++++----------- 2 files changed, 50 insertions(+), 25 deletions(-) --- a/arch/arm/boot/dts/bcm2708_common.dtsi +++ b/arch/arm/boot/dts/bcm2708_common.dtsi @@ -136,9 +136,8 @@ reg = <0x7e202000 0x100>; interrupts = <2 24>; clocks = <&clk_core>; - dmas = <&dma 13>, - <&dma 13>; - dma-names = "tx", "rx"; + dmas = <&dma 13>; + dma-names = "rx-tx"; brcm,overclock-50 = <0>; brcm,pio-limit = <1>; status = "disabled"; --- a/drivers/mmc/host/bcm2835-sdhost.c +++ b/drivers/mmc/host/bcm2835-sdhost.c @@ -185,9 +185,10 @@ struct bcm2835_host { unsigned int debug:1; /* Enable debug output */ /*DMA part*/ - struct dma_chan *dma_chan_rx; /* DMA channel for reads */ - struct dma_chan *dma_chan_tx; /* DMA channel for writes */ - struct dma_chan *dma_chan; /* Channel in used */ + struct dma_chan *dma_chan_rxtx; /* DMA channel for reads and writes */ + struct dma_chan *dma_chan; /* Channel in use */ + struct dma_slave_config dma_cfg_rx; + struct dma_slave_config dma_cfg_tx; struct dma_async_tx_descriptor *dma_desc; u32 dma_dir; u32 drain_words; @@ -771,12 +772,11 @@ static void bcm2835_sdhost_prepare_dma(s log_event("PRD<", (u32)data, 0); pr_debug("bcm2835_sdhost_prepare_dma()\n"); + dma_chan = host->dma_chan_rxtx; if (data->flags & MMC_DATA_READ) { - dma_chan = host->dma_chan_rx; dir_data = DMA_FROM_DEVICE; dir_slave = DMA_DEV_TO_MEM; } else { - dma_chan = host->dma_chan_tx; dir_data = DMA_TO_DEVICE; dir_slave = DMA_MEM_TO_DEV; } @@ -813,6 +813,12 @@ static void bcm2835_sdhost_prepare_dma(s host->drain_words = len/4; } + /* The parameters have already been validated, so this will not fail */ + (void)dmaengine_slave_config(dma_chan, + (dir_data == DMA_FROM_DEVICE) ? + &host->dma_cfg_rx : + &host->dma_cfg_tx); + len = dma_map_sg(dma_chan->device->dev, data->sg, data->sg_len, dir_data); @@ -1805,28 +1811,46 @@ int bcm2835_sdhost_add_host(struct bcm28 spin_lock_init(&host->lock); if (host->allow_dma) { - if (IS_ERR_OR_NULL(host->dma_chan_tx) || - IS_ERR_OR_NULL(host->dma_chan_rx)) { - pr_err("%s: unable to initialise DMA channels. " + if (IS_ERR_OR_NULL(host->dma_chan_rxtx)) { + pr_err("%s: unable to initialise DMA channel. " "Falling back to PIO\n", mmc_hostname(mmc)); host->use_dma = false; } else { - host->use_dma = true; - cfg.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; cfg.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; cfg.slave_id = 13; /* DREQ channel */ + /* Validate the slave configurations */ + cfg.direction = DMA_MEM_TO_DEV; cfg.src_addr = 0; cfg.dst_addr = host->bus_addr + SDDATA; - ret = dmaengine_slave_config(host->dma_chan_tx, &cfg); - cfg.direction = DMA_DEV_TO_MEM; - cfg.src_addr = host->bus_addr + SDDATA; - cfg.dst_addr = 0; - ret = dmaengine_slave_config(host->dma_chan_rx, &cfg); + ret = dmaengine_slave_config(host->dma_chan_rxtx, &cfg); + + if (ret == 0) { + host->dma_cfg_tx = cfg; + + cfg.direction = DMA_DEV_TO_MEM; + cfg.src_addr = host->bus_addr + SDDATA; + cfg.dst_addr = 0; + + ret = dmaengine_slave_config(host->dma_chan_rxtx, &cfg); + } + + if (ret == 0) { + host->dma_cfg_rx = cfg; + + host->use_dma = true; + } else { + pr_err("%s: unable to configure DMA channel. " + "Falling back to PIO\n", + mmc_hostname(mmc)); + dma_release_channel(host->dma_chan_rxtx); + host->dma_chan_rxtx = NULL; + host->use_dma = false; + } } } else { host->use_dma = false; @@ -1948,19 +1972,21 @@ static int bcm2835_sdhost_probe(struct p if (host->allow_dma) { if (node) { - host->dma_chan_tx = - dma_request_slave_channel(dev, "tx"); - host->dma_chan_rx = - dma_request_slave_channel(dev, "rx"); + host->dma_chan_rxtx = + dma_request_slave_channel(dev, "rx-tx"); + if (!host->dma_chan_rxtx) + host->dma_chan_rxtx = + dma_request_slave_channel(dev, "tx"); + if (!host->dma_chan_rxtx) + host->dma_chan_rxtx = + dma_request_slave_channel(dev, "rx"); } else { dma_cap_mask_t mask; dma_cap_zero(mask); /* we don't care about the channel, any would work */ dma_cap_set(DMA_SLAVE, mask); - host->dma_chan_tx = - dma_request_channel(mask, NULL, NULL); - host->dma_chan_rx = + host->dma_chan_rxtx = dma_request_channel(mask, NULL, NULL); } }