From f9d97a8c5a530fea5a16bbb2c0becc344534c73e Mon Sep 17 00:00:00 2001 From: Phil Elwell Date: Fri, 12 Jul 2019 15:38:35 +0100 Subject: [PATCH 700/782] i2c: bcm2835: Set clock-stretch timeout to 35ms The BCM2835 I2C blocks have a register to set the clock-stretch timeout - how long the device is allowed to hold SCL low - in bus cycles. The current driver doesn't write to the register, therefore the default value of 64 cycles is being used for all devices. Set the timeout to the value recommended for SMBus - 35ms. See: https://github.com/raspberrypi/linux/issues/3064 Signed-off-by: Phil Elwell --- drivers/i2c/busses/i2c-bcm2835.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) --- a/drivers/i2c/busses/i2c-bcm2835.c +++ b/drivers/i2c/busses/i2c-bcm2835.c @@ -194,6 +194,7 @@ static int clk_bcm2835_i2c_set_rate(stru { struct clk_bcm2835_i2c *div = to_clk_bcm2835_i2c(hw); u32 redl, fedl; + u32 clk_tout; u32 divider = clk_bcm2835_i2c_calc_divider(rate, parent_rate); if (divider == -EINVAL) @@ -217,6 +218,17 @@ static int clk_bcm2835_i2c_set_rate(stru bcm2835_i2c_writel(div->i2c_dev, BCM2835_I2C_DEL, (fedl << BCM2835_I2C_FEDL_SHIFT) | (redl << BCM2835_I2C_REDL_SHIFT)); + + /* + * Set the clock stretch timeout to the SMBUs-recommended 35ms. + */ + if (rate > 0xffff*1000/35) + clk_tout = 0xffff; + else + clk_tout = 35*rate/1000; + + bcm2835_i2c_writel(div->i2c_dev, BCM2835_I2C_CLKT, clk_tout); + return 0; }