From 621fb1606217c3e72feda69255ae6cb6a7ccfec2 Mon Sep 17 00:00:00 2001 From: Phil Elwell Date: Thu, 4 Apr 2019 13:33:47 +0100 Subject: [PATCH 643/806] bcm2835-dma: Add proper 40-bit DMA support The 40-bit additions are not fully tested, but it should be capable of supporting both 40-bit memcpy on BCM2711 and regular Lite channels on BCM2835. Signed-off-by: Phil Elwell --- arch/arm/boot/dts/bcm2838.dtsi | 33 +- drivers/dma/bcm2835-dma.c | 426 ++++++++++++++----- drivers/pci/controller/pcie-brcmstb-bounce.c | 30 +- drivers/pci/controller/pcie-brcmstb-bounce.h | 21 +- drivers/pci/controller/pcie-brcmstb.c | 23 +- 5 files changed, 395 insertions(+), 138 deletions(-) --- a/arch/arm/boot/dts/bcm2838.dtsi +++ b/arch/arm/boot/dts/bcm2838.dtsi @@ -372,6 +372,23 @@ }; }; + dma40: dma@7e007b00 { + compatible = "brcm,bcm2838-dma"; + reg = <0x0 0x7e007b00 0x400>; + interrupts = + , /* dma4 11 */ + , /* dma4 12 */ + , /* dma4 13 */ + ; /* dma4 14 */ + interrupt-names = "dma11", + "dma12", + "dma13", + "dma14"; + #dma-cells = <1>; + brcm,dma-channel-mask = <0x7000>; + }; + /* DMA4 - 40 bit DMA engines */ + xhci: xhci@7e9c0000 { compatible = "generic-xhci"; status = "disabled"; @@ -689,6 +706,7 @@ }; &dma { + reg = <0x7e007000 0xb00>; interrupts = , , , @@ -699,12 +717,7 @@ , /* dmalite 7 */ , /* dmalite 8 */ , /* dmalite 9 */ - , /* dmalite 10 */ - /* DMA4 - 40 bit DMA engines */ - , /* dma4 11 */ - , /* dma4 12 */ - , /* dma4 13 */ - ; /* dma4 14 */ + ; /* dmalite 10 */ interrupt-names = "dma0", "dma1", "dma2", @@ -715,10 +728,6 @@ "dma7", "dma8", "dma9", - "dma10", - "dma11", - "dma12", - "dma13", - "dma14"; - brcm,dma-channel-mask = <0x7ef5>; + "dma10"; + brcm,dma-channel-mask = <0x01f5>; }; --- a/drivers/dma/bcm2835-dma.c +++ b/drivers/dma/bcm2835-dma.c @@ -50,12 +50,18 @@ #define BCM2835_DMA_MAX_DMA_CHAN_SUPPORTED 14 #define BCM2835_DMA_CHAN_NAME_SIZE 8 #define BCM2835_DMA_BULK_MASK BIT(0) +#define BCM2838_DMA_MEMCPY_CHAN 14 + +struct bcm2835_dma_cfg_data { + u32 chan_40bit_mask; +}; struct bcm2835_dmadev { struct dma_device ddev; spinlock_t lock; void __iomem *base; struct device_dma_parameters dma_parms; + const struct bcm2835_dma_cfg_data *cfg_data; }; struct bcm2835_dma_cb { @@ -100,6 +106,7 @@ struct bcm2835_chan { unsigned int irq_flags; bool is_lite_channel; + bool is_40bit_channel; }; struct bcm2835_desc { @@ -189,7 +196,8 @@ struct bcm2835_desc { #define BCM2835_DMA_DATA_TYPE_S128 16 /* Valid only for channels 0 - 14, 15 has its own base address */ -#define BCM2835_DMA_CHAN(n) ((n) << 8) /* Base address */ +#define BCM2835_DMA_CHAN_SIZE 0x100 +#define BCM2835_DMA_CHAN(n) ((n) * BCM2835_DMA_CHAN_SIZE) /* Base address */ #define BCM2835_DMA_CHANIO(base, n) ((base) + BCM2835_DMA_CHAN(n)) /* the max dma length for different channels */ @@ -200,7 +208,7 @@ struct bcm2835_desc { #define BCM2838_DMA40_CS 0x00 #define BCM2838_DMA40_CB 0x04 #define BCM2838_DMA40_DEBUG 0x0c -#define BCM2858_DMA40_TI 0x10 +#define BCM2838_DMA40_TI 0x10 #define BCM2838_DMA40_SRC 0x14 #define BCM2838_DMA40_SRCI 0x18 #define BCM2838_DMA40_DEST 0x1c @@ -209,32 +217,97 @@ struct bcm2835_desc { #define BCM2838_DMA40_NEXT_CB 0x28 #define BCM2838_DMA40_DEBUG2 0x2c -#define BCM2838_DMA40_CS_ACTIVE BIT(0) -#define BCM2838_DMA40_CS_END BIT(1) +#define BCM2838_DMA40_ACTIVE BIT(0) +#define BCM2838_DMA40_END BIT(1) +#define BCM2838_DMA40_INT BIT(2) +#define BCM2838_DMA40_DREQ BIT(3) /* DREQ state */ +#define BCM2838_DMA40_RD_PAUSED BIT(4) /* Reading is paused */ +#define BCM2838_DMA40_WR_PAUSED BIT(5) /* Writing is paused */ +#define BCM2838_DMA40_DREQ_PAUSED BIT(6) /* Is paused by DREQ flow control */ +#define BCM2838_DMA40_WAITING_FOR_WRITES BIT(7) /* Waiting for last write */ +#define BCM2838_DMA40_ERR BIT(10) +#define BCM2838_DMA40_QOS(x) (((x) & 0x1f) << 16) +#define BCM2838_DMA40_PANIC_QOS(x) (((x) & 0x1f) << 20) +#define BCM2838_DMA40_WAIT_FOR_WRITES BIT(28) +#define BCM2838_DMA40_DISDEBUG BIT(29) +#define BCM2838_DMA40_ABORT BIT(30) +#define BCM2838_DMA40_HALT BIT(31) +#define BCM2838_DMA40_CS_FLAGS(x) (x & (BCM2838_DMA40_QOS(15) | \ + BCM2838_DMA40_PANIC_QOS(15) | \ + BCM2838_DMA40_WAIT_FOR_WRITES | \ + BCM2838_DMA40_DISDEBUG)) + +/* Transfer information bits */ +#define BCM2838_DMA40_INTEN BIT(0) +#define BCM2838_DMA40_TDMODE BIT(1) /* 2D-Mode */ +#define BCM2838_DMA40_WAIT_RESP BIT(2) /* wait for AXI write to be acked */ +#define BCM2838_DMA40_WAIT_RD_RESP BIT(3) /* wait for AXI read to complete */ +#define BCM2838_DMA40_PER_MAP(x) ((x & 31) << 9) /* REQ source */ +#define BCM2838_DMA40_S_DREQ BIT(14) /* enable SREQ for source */ +#define BCM2838_DMA40_D_DREQ BIT(15) /* enable DREQ for destination */ +#define BCM2838_DMA40_S_WAIT(x) ((x & 0xff) << 16) /* add DMA read-wait cycles */ +#define BCM2838_DMA40_D_WAIT(x) ((x & 0xff) << 24) /* add DMA write-wait cycles */ -#define BCM2838_DMA40_CS_QOS(x) (((x) & 0x1f) << 16) -#define BCM2838_DMA40_CS_PANIC_QOS(x) (((x) & 0x1f) << 20) -#define BCM2838_DMA40_CS_WRITE_WAIT BIT(28) +/* debug register bits */ +#define BCM2838_DMA40_DEBUG_WRITE_ERR BIT(0) +#define BCM2838_DMA40_DEBUG_FIFO_ERR BIT(1) +#define BCM2838_DMA40_DEBUG_READ_ERR BIT(2) +#define BCM2838_DMA40_DEBUG_READ_CB_ERR BIT(3) +#define BCM2838_DMA40_DEBUG_IN_ON_ERR BIT(8) +#define BCM2838_DMA40_DEBUG_ABORT_ON_ERR BIT(9) +#define BCM2838_DMA40_DEBUG_HALT_ON_ERR BIT(10) +#define BCM2838_DMA40_DEBUG_DISABLE_CLK_GATE BIT(11) +#define BCM2838_DMA40_DEBUG_RSTATE_SHIFT 14 +#define BCM2838_DMA40_DEBUG_RSTATE_BITS 4 +#define BCM2838_DMA40_DEBUG_WSTATE_SHIFT 18 +#define BCM2838_DMA40_DEBUG_WSTATE_BITS 4 +#define BCM2838_DMA40_DEBUG_RESET BIT(23) +#define BCM2838_DMA40_DEBUG_ID_SHIFT 24 +#define BCM2838_DMA40_DEBUG_ID_BITS 4 +#define BCM2838_DMA40_DEBUG_VERSION_SHIFT 28 +#define BCM2838_DMA40_DEBUG_VERSION_BITS 4 + +/* Valid only for channels 0 - 3 (11 - 14) */ +#define BCM2838_DMA40_CHAN(n) (((n) + 11) << 8) /* Base address */ +#define BCM2838_DMA40_CHANIO(base, n) ((base) + BCM2838_DMA_CHAN(n)) -#define BCM2838_DMA40_BURST_LEN(x) ((((x) - 1) & 0xf) << 8) -#define BCM2838_DMA40_INC BIT(12) -#define BCM2838_DMA40_SIZE_128 (2 << 13) +/* the max dma length for different channels */ +#define MAX_DMA40_LEN SZ_1G -#define BCM2838_DMA40_MEMCPY_QOS \ - (BCM2838_DMA40_CS_QOS(0x0) | \ - BCM2838_DMA40_CS_PANIC_QOS(0x0) | \ - BCM2838_DMA40_CS_WRITE_WAIT) +#define BCM2838_DMA40_BURST_LEN(x) ((min(x,16) - 1) << 8) +#define BCM2838_DMA40_INC BIT(12) +#define BCM2838_DMA40_SIZE_32 (0 << 13) +#define BCM2838_DMA40_SIZE_64 (1 << 13) +#define BCM2838_DMA40_SIZE_128 (2 << 13) +#define BCM2838_DMA40_SIZE_256 (3 << 13) +#define BCM2838_DMA40_IGNORE BIT(15) +#define BCM2838_DMA40_STRIDE(x) ((x) << 16) /* For 2D mode */ + +#define BCM2838_DMA40_MEMCPY_FLAGS \ + (BCM2838_DMA40_QOS(0) | \ + BCM2838_DMA40_PANIC_QOS(0) | \ + BCM2838_DMA40_WAIT_FOR_WRITES | \ + BCM2838_DMA40_DISDEBUG) #define BCM2838_DMA40_MEMCPY_XFER_INFO \ (BCM2838_DMA40_SIZE_128 | \ BCM2838_DMA40_INC | \ BCM2838_DMA40_BURST_LEN(16)) +struct bcm2835_dmadev *memcpy_parent; static void __iomem *memcpy_chan; static struct bcm2838_dma40_scb *memcpy_scb; static dma_addr_t memcpy_scb_dma; DEFINE_SPINLOCK(memcpy_lock); +static const struct bcm2835_dma_cfg_data bcm2835_dma_cfg = { + .chan_40bit_mask = 0, +}; + +static const struct bcm2835_dma_cfg_data bcm2838_dma_cfg = { + .chan_40bit_mask = BIT(11) | BIT(12) | BIT(13) | BIT(14), +}; + static inline size_t bcm2835_dma_max_frame_length(struct bcm2835_chan *c) { /* lite and normal channels have different max frame length */ @@ -264,6 +337,32 @@ static inline struct bcm2835_desc *to_bc return container_of(t, struct bcm2835_desc, vd.tx); } +static inline uint32_t to_bcm2838_ti(uint32_t info) +{ + return ((info & BCM2835_DMA_INT_EN) ? BCM2838_DMA40_INTEN : 0) | + ((info & BCM2835_DMA_WAIT_RESP) ? BCM2838_DMA40_WAIT_RESP : 0) | + ((info & BCM2835_DMA_S_DREQ) ? + (BCM2838_DMA40_S_DREQ | BCM2838_DMA40_WAIT_RD_RESP) : 0) | + ((info & BCM2835_DMA_D_DREQ) ? BCM2838_DMA40_D_DREQ : 0) | + BCM2838_DMA40_PER_MAP((info >> 16) & 0x1f); +} + +static inline uint32_t to_bcm2838_srci(uint32_t info) +{ + return ((info & BCM2835_DMA_S_INC) ? BCM2838_DMA40_INC : 0); +} + +static inline uint32_t to_bcm2838_dsti(uint32_t info) +{ + return ((info & BCM2835_DMA_D_INC) ? BCM2838_DMA40_INC : 0); +} + +static inline uint32_t to_bcm2838_cbaddr(dma_addr_t addr) +{ + BUG_ON(addr & 0x1f); + return (addr >> 5); +} + static void bcm2835_dma_free_cb_chain(struct bcm2835_desc *desc) { size_t i; @@ -282,45 +381,53 @@ static void bcm2835_dma_desc_free(struct } static void bcm2835_dma_create_cb_set_length( - struct bcm2835_chan *chan, + struct bcm2835_chan *c, struct bcm2835_dma_cb *control_block, size_t len, size_t period_len, size_t *total_len, u32 finalextrainfo) { - size_t max_len = bcm2835_dma_max_frame_length(chan); + size_t max_len = bcm2835_dma_max_frame_length(c); + uint32_t cb_len; /* set the length taking lite-channel limitations into account */ - control_block->length = min_t(u32, len, max_len); + cb_len = min_t(u32, len, max_len); - /* finished if we have no period_length */ - if (!period_len) - return; + if (period_len) { + /* + * period_len means: that we need to generate + * transfers that are terminating at every + * multiple of period_len - this is typically + * used to set the interrupt flag in info + * which is required during cyclic transfers + */ - /* - * period_len means: that we need to generate - * transfers that are terminating at every - * multiple of period_len - this is typically - * used to set the interrupt flag in info - * which is required during cyclic transfers - */ + /* have we filled in period_length yet? */ + if (*total_len + cb_len < period_len) { + /* update number of bytes in this period so far */ + *total_len += cb_len; + } else { + /* calculate the length that remains to reach period_len */ + cb_len = period_len - *total_len; - /* have we filled in period_length yet? */ - if (*total_len + control_block->length < period_len) { - /* update number of bytes in this period so far */ - *total_len += control_block->length; - return; + /* reset total_length for next period */ + *total_len = 0; + } } - /* calculate the length that remains to reach period_length */ - control_block->length = period_len - *total_len; - - /* reset total_length for next period */ - *total_len = 0; - - /* add extrainfo bits in info */ - control_block->info |= finalextrainfo; + if (c->is_40bit_channel) { + struct bcm2838_dma40_scb *scb = + (struct bcm2838_dma40_scb *)control_block; + + scb->len = cb_len; + /* add extrainfo bits to ti */ + scb->ti |= to_bcm2838_ti(finalextrainfo); + } else { + control_block->length = cb_len; + /* add extrainfo bits to info */ + control_block->info |= finalextrainfo; + } } static inline size_t bcm2835_dma_count_frames_for_sg( @@ -343,7 +450,7 @@ static inline size_t bcm2835_dma_count_f /** * bcm2835_dma_create_cb_chain - create a control block and fills data in * - * @chan: the @dma_chan for which we run this + * @c: the @bcm2835_chan for which we run this * @direction: the direction in which we transfer * @cyclic: it is a cyclic transfer * @info: the default info bits to apply per controlblock @@ -361,12 +468,11 @@ static inline size_t bcm2835_dma_count_f * @gfp: the GFP flag to use for allocation */ static struct bcm2835_desc *bcm2835_dma_create_cb_chain( - struct dma_chan *chan, enum dma_transfer_direction direction, + struct bcm2835_chan *c, enum dma_transfer_direction direction, bool cyclic, u32 info, u32 finalextrainfo, size_t frames, dma_addr_t src, dma_addr_t dst, size_t buf_len, size_t period_len, gfp_t gfp) { - struct bcm2835_chan *c = to_bcm2835_dma_chan(chan); size_t len = buf_len, total_len; size_t frame; struct bcm2835_desc *d; @@ -399,11 +505,23 @@ static struct bcm2835_desc *bcm2835_dma_ /* fill in the control block */ control_block = cb_entry->cb; - control_block->info = info; - control_block->src = src; - control_block->dst = dst; - control_block->stride = 0; - control_block->next = 0; + if (c->is_40bit_channel) { + struct bcm2838_dma40_scb *scb = + (struct bcm2838_dma40_scb *)control_block; + scb->ti = to_bcm2838_ti(info); + scb->src = lower_32_bits(src); + scb->srci= upper_32_bits(src) | to_bcm2838_srci(info); + scb->dst = lower_32_bits(dst); + scb->dsti = upper_32_bits(dst) | to_bcm2838_dsti(info); + scb->next_cb = 0; + } else { + control_block->info = info; + control_block->src = src; + control_block->dst = dst; + control_block->stride = 0; + control_block->next = 0; + } + /* set up length in control_block if requested */ if (buf_len) { /* calculate length honoring period_length */ @@ -417,7 +535,10 @@ static struct bcm2835_desc *bcm2835_dma_ } /* link this the last controlblock */ - if (frame) + if (frame && c->is_40bit_channel) + d->cb_list[frame - 1].cb->next = + to_bcm2838_cbaddr(cb_entry->paddr); + if (frame && !c->is_40bit_channel) d->cb_list[frame - 1].cb->next = cb_entry->paddr; /* update src and dst and length */ @@ -431,7 +552,14 @@ static struct bcm2835_desc *bcm2835_dma_ } /* the last frame requires extra flags */ - d->cb_list[d->frames - 1].cb->info |= finalextrainfo; + if (c->is_40bit_channel) { + struct bcm2838_dma40_scb *scb = + (struct bcm2838_dma40_scb *)d->cb_list[d->frames-1].cb; + + scb->ti |= to_bcm2838_ti(finalextrainfo); + } else { + d->cb_list[d->frames - 1].cb->info |= finalextrainfo; + } /* detect a size missmatch */ if (buf_len && (d->size != buf_len)) @@ -445,28 +573,51 @@ error_cb: } static void bcm2835_dma_fill_cb_chain_with_sg( - struct dma_chan *chan, + struct bcm2835_chan *c, enum dma_transfer_direction direction, struct bcm2835_cb_entry *cb, struct scatterlist *sgl, unsigned int sg_len) { - struct bcm2835_chan *c = to_bcm2835_dma_chan(chan); size_t len, max_len; unsigned int i; dma_addr_t addr; struct scatterlist *sgent; + pr_err("dma_fill_chain_with_sg(ch %d, dir %d):\n", c->ch, direction); + max_len = bcm2835_dma_max_frame_length(c); for_each_sg(sgl, sgent, sg_len, i) { - for (addr = sg_dma_address(sgent), len = sg_dma_len(sgent); - len > 0; - addr += cb->cb->length, len -= cb->cb->length, cb++) { - if (direction == DMA_DEV_TO_MEM) - cb->cb->dst = addr; - else - cb->cb->src = addr; - cb->cb->length = min(len, max_len); + if (c->is_40bit_channel) { + struct bcm2838_dma40_scb *scb = + (struct bcm2838_dma40_scb *)cb->cb; + for (addr = sg_dma_address(sgent), + len = sg_dma_len(sgent); + len > 0; + addr += scb->len, len -= scb->len, scb++) { + if (direction == DMA_DEV_TO_MEM) { + scb->dst = lower_32_bits(addr); + scb->dsti = upper_32_bits(addr) | BCM2838_DMA40_INC; + } else { + scb->src = lower_32_bits(addr); + scb->srci = upper_32_bits(addr) | BCM2838_DMA40_INC; + } + scb->len = min(len, max_len); + pr_err(" %llx, %x\n", (u64)addr, scb->len); + } + } else { + for (addr = sg_dma_address(sgent), + len = sg_dma_len(sgent); + len > 0; + addr += cb->cb->length, len -= cb->cb->length, + cb++) { + if (direction == DMA_DEV_TO_MEM) + cb->cb->dst = addr; + else + cb->cb->src = addr; + cb->cb->length = min(len, max_len); + pr_err(" %llx, %x\n", (u64)addr, cb->cb->length); + } } } } @@ -475,6 +626,10 @@ static int bcm2835_dma_abort(struct bcm2 { void __iomem *chan_base = c->chan_base; long int timeout = 10000; + u32 wait_mask = BCM2835_DMA_WAITING_FOR_WRITES; + + if (c->is_40bit_channel) + wait_mask = BCM2838_DMA40_WAITING_FOR_WRITES; /* * A zero control block address means the channel is idle. @@ -487,8 +642,7 @@ static int bcm2835_dma_abort(struct bcm2 writel(0, chan_base + BCM2835_DMA_CS); /* Wait for any current AXI transfer to complete */ - while ((readl(chan_base + BCM2835_DMA_CS) & - BCM2835_DMA_WAITING_FOR_WRITES) && --timeout) + while ((readl(chan_base + BCM2835_DMA_CS) & wait_mask) && --timeout) cpu_relax(); /* Peripheral might be stuck and fail to signal AXI write responses */ @@ -505,6 +659,7 @@ static void bcm2835_dma_start_desc(struc struct virt_dma_desc *vd = vchan_next_desc(&c->vc); struct bcm2835_desc *d; + pr_err("dma_start_desc(%px)\n", vd); if (!vd) { c->desc = NULL; return; @@ -514,9 +669,16 @@ static void bcm2835_dma_start_desc(struc c->desc = d = to_bcm2835_dma_desc(&vd->tx); - writel(d->cb_list[0].paddr, c->chan_base + BCM2835_DMA_ADDR); - writel(BCM2835_DMA_ACTIVE | BCM2835_DMA_CS_FLAGS(c->dreq), - c->chan_base + BCM2835_DMA_CS); + if (c->is_40bit_channel) { + writel(to_bcm2838_cbaddr(d->cb_list[0].paddr), + c->chan_base + BCM2838_DMA40_CB); + writel(BCM2838_DMA40_ACTIVE | BCM2838_DMA40_CS_FLAGS(c->dreq), + c->chan_base + BCM2838_DMA40_CS); + } else { + writel(d->cb_list[0].paddr, c->chan_base + BCM2835_DMA_ADDR); + writel(BCM2835_DMA_ACTIVE | BCM2835_DMA_CS_FLAGS(c->dreq), + c->chan_base + BCM2835_DMA_CS); + } } static irqreturn_t bcm2835_dma_callback(int irq, void *data) @@ -544,7 +706,8 @@ static irqreturn_t bcm2835_dma_callback( * will remain idle despite the ACTIVE flag being set. */ writel(BCM2835_DMA_INT | BCM2835_DMA_ACTIVE | - BCM2835_DMA_CS_FLAGS(c->dreq), + (c->is_40bit_channel ? BCM2838_DMA40_CS_FLAGS(c->dreq) : + BCM2835_DMA_CS_FLAGS(c->dreq)), c->chan_base + BCM2835_DMA_CS); d = c->desc; @@ -643,9 +806,17 @@ static enum dma_status bcm2835_dma_tx_st struct bcm2835_desc *d = c->desc; dma_addr_t pos; - if (d->dir == DMA_MEM_TO_DEV) + if (d->dir == DMA_MEM_TO_DEV && c->is_40bit_channel) + pos = readl(c->chan_base + BCM2838_DMA40_SRC) + + ((readl(c->chan_base + BCM2838_DMA40_SRCI) & + 0xff) << 8); + else if (d->dir == DMA_MEM_TO_DEV && !c->is_40bit_channel) pos = readl(c->chan_base + BCM2835_DMA_SOURCE_AD); - else if (d->dir == DMA_DEV_TO_MEM) + else if (d->dir == DMA_DEV_TO_MEM && c->is_40bit_channel) + pos = readl(c->chan_base + BCM2838_DMA40_DEST) + + ((readl(c->chan_base + BCM2838_DMA40_DESTI) & + 0xff) << 8); + else if (d->dir == DMA_DEV_TO_MEM && !c->is_40bit_channel) pos = readl(c->chan_base + BCM2835_DMA_DEST_AD); else pos = 0; @@ -691,7 +862,7 @@ static struct dma_async_tx_descriptor *b frames = bcm2835_dma_frames_for_length(len, max_len); /* allocate the CB chain - this also fills in the pointers */ - d = bcm2835_dma_create_cb_chain(chan, DMA_MEM_TO_MEM, false, + d = bcm2835_dma_create_cb_chain(c, DMA_MEM_TO_MEM, false, info, extra, frames, src, dst, len, 0, GFP_KERNEL); if (!d) @@ -726,11 +897,21 @@ static struct dma_async_tx_descriptor *b if (c->cfg.src_addr_width != DMA_SLAVE_BUSWIDTH_4_BYTES) return NULL; src = c->cfg.src_addr; + /* + * One would think it ought to be possible to get the physical + * to dma address mapping information from the dma-ranges DT + * property, but I've not found a way yet that doesn't involve + * open-coding the whole thing. + */ + if (c->is_40bit_channel) + src |= 0x400000000ull; info |= BCM2835_DMA_S_DREQ | BCM2835_DMA_D_INC; } else { if (c->cfg.dst_addr_width != DMA_SLAVE_BUSWIDTH_4_BYTES) return NULL; dst = c->cfg.dst_addr; + if (c->is_40bit_channel) + dst |= 0x400000000ull; info |= BCM2835_DMA_D_DREQ | BCM2835_DMA_S_INC; } @@ -738,7 +919,7 @@ static struct dma_async_tx_descriptor *b frames = bcm2835_dma_count_frames_for_sg(c, sgl, sg_len); /* allocate the CB chain */ - d = bcm2835_dma_create_cb_chain(chan, direction, false, + d = bcm2835_dma_create_cb_chain(c, direction, false, info, extra, frames, src, dst, 0, 0, GFP_KERNEL); @@ -746,7 +927,7 @@ static struct dma_async_tx_descriptor *b return NULL; /* fill in frames with scatterlist pointers */ - bcm2835_dma_fill_cb_chain_with_sg(chan, direction, d->cb_list, + bcm2835_dma_fill_cb_chain_with_sg(c, direction, d->cb_list, sgl, sg_len); return vchan_tx_prep(&c->vc, &d->vd, flags); @@ -815,7 +996,7 @@ static struct dma_async_tx_descriptor *b * note that we need to use GFP_NOWAIT, as the ALSA i2s dmaengine * implementation calls prep_dma_cyclic with interrupts disabled. */ - d = bcm2835_dma_create_cb_chain(chan, direction, true, + d = bcm2835_dma_create_cb_chain(c, direction, true, info, extra, frames, src, dst, buf_len, period_len, GFP_NOWAIT); @@ -823,7 +1004,8 @@ static struct dma_async_tx_descriptor *b return NULL; /* wrap around into a loop */ - d->cb_list[d->frames - 1].cb->next = d->cb_list[0].paddr; + d->cb_list[d->frames - 1].cb->next = c->is_40bit_channel ? + to_bcm2838_cbaddr(d->cb_list[0].paddr) : d->cb_list[0].paddr; return vchan_tx_prep(&c->vc, &d->vd, flags); } @@ -899,9 +1081,11 @@ static int bcm2835_dma_chan_init(struct c->irq_number = irq; c->irq_flags = irq_flags; - /* check in DEBUG register if this is a LITE channel */ - if (readl(c->chan_base + BCM2835_DMA_DEBUG) & - BCM2835_DMA_DEBUG_LITE) + /* check for 40bit and lite channels */ + if (d->cfg_data->chan_40bit_mask & BIT(chan_id)) + c->is_40bit_channel = true; + else if (readl(c->chan_base + BCM2835_DMA_DEBUG) & + BCM2835_DMA_DEBUG_LITE) c->is_lite_channel = true; return 0; @@ -918,18 +1102,16 @@ static void bcm2835_dma_free(struct bcm2 } } -int bcm2838_dma40_memcpy_init(struct device *dev) +int bcm2838_dma40_memcpy_init(void) { - if (memcpy_scb) - return 0; + if (!memcpy_parent) + return -EPROBE_DEFER; - memcpy_scb = dma_alloc_coherent(dev, sizeof(*memcpy_scb), - &memcpy_scb_dma, GFP_KERNEL); + if (!memcpy_chan) + return -EINVAL; - if (!memcpy_scb) { - pr_err("bcm2838_dma40_memcpy_init failed!\n"); + if (!memcpy_scb) return -ENOMEM; - } return 0; } @@ -956,20 +1138,22 @@ void bcm2838_dma40_memcpy(dma_addr_t dst scb->next_cb = 0; writel((u32)(memcpy_scb_dma >> 5), memcpy_chan + BCM2838_DMA40_CB); - writel(BCM2838_DMA40_MEMCPY_QOS + BCM2838_DMA40_CS_ACTIVE, + writel(BCM2838_DMA40_MEMCPY_FLAGS + BCM2838_DMA40_ACTIVE, memcpy_chan + BCM2838_DMA40_CS); + /* Poll for completion */ - while (!(readl(memcpy_chan + BCM2838_DMA40_CS) & BCM2838_DMA40_CS_END)) + while (!(readl(memcpy_chan + BCM2838_DMA40_CS) & BCM2838_DMA40_END)) cpu_relax(); - writel(BCM2838_DMA40_CS_END, memcpy_chan + BCM2838_DMA40_CS); + writel(BCM2838_DMA40_END, memcpy_chan + BCM2838_DMA40_CS); spin_unlock_irqrestore(&memcpy_lock, flags); } EXPORT_SYMBOL(bcm2838_dma40_memcpy); static const struct of_device_id bcm2835_dma_of_match[] = { - { .compatible = "brcm,bcm2835-dma", }, + { .compatible = "brcm,bcm2835-dma", .data = &bcm2835_dma_cfg }, + { .compatible = "brcm,bcm2838-dma", .data = &bcm2838_dma_cfg }, {}, }; MODULE_DEVICE_TABLE(of, bcm2835_dma_of_match); @@ -1001,6 +1185,8 @@ static int bcm2835_dma_probe(struct plat int irq_flags; uint32_t chans_available; char chan_name[BCM2835_DMA_CHAN_NAME_SIZE]; + const struct of_device_id *of_id; + int chan_count, chan_start, chan_end; if (!pdev->dev.dma_mask) pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask; @@ -1022,9 +1208,13 @@ static int bcm2835_dma_probe(struct plat base = devm_ioremap_resource(&pdev->dev, res); if (IS_ERR(base)) return PTR_ERR(base); - rc = bcm_dmaman_probe(pdev, base, BCM2835_DMA_BULK_MASK); - if (rc) - dev_err(&pdev->dev, "Failed to initialize the legacy API\n"); + + /* The set of channels can be split across multiple instances. */ + chan_start = ((u32)base / BCM2835_DMA_CHAN_SIZE) & 0xf; + base -= BCM2835_DMA_CHAN(chan_start); + chan_count = resource_size(res) / BCM2835_DMA_CHAN_SIZE; + chan_end = min(chan_start + chan_count, + BCM2835_DMA_MAX_DMA_CHAN_SUPPORTED + 1); od->base = base; @@ -1054,6 +1244,14 @@ static int bcm2835_dma_probe(struct plat platform_set_drvdata(pdev, od); + of_id = of_match_node(bcm2835_dma_of_match, pdev->dev.of_node); + if (!of_id) { + dev_err(&pdev->dev, "Failed to match compatible string\n"); + return -EINVAL; + } + + od->cfg_data = of_id->data; + /* Request DMA channel mask from device tree */ if (of_property_read_u32(pdev->dev.of_node, "brcm,dma-channel-mask", @@ -1063,18 +1261,34 @@ static int bcm2835_dma_probe(struct plat goto err_no_dma; } - /* Channel 0 is used by the legacy API */ - chans_available &= ~BCM2835_DMA_BULK_MASK; + /* One channel is reserved for the legacy API */ + if (chans_available & BCM2835_DMA_BULK_MASK) { + rc = bcm_dmaman_probe(pdev, base, + chans_available & BCM2835_DMA_BULK_MASK); + if (rc) + dev_err(&pdev->dev, + "Failed to initialize the legacy API\n"); + + chans_available &= ~BCM2835_DMA_BULK_MASK; + } - /* We can't use channels 11-13 yet */ - chans_available &= ~(BIT(11) | BIT(12) | BIT(13)); + /* And possibly one for the 40-bit DMA memcpy API */ + if (chans_available & od->cfg_data->chan_40bit_mask & + BIT(BCM2838_DMA_MEMCPY_CHAN)) { + memcpy_parent = od; + memcpy_chan = BCM2835_DMA_CHANIO(base, BCM2838_DMA_MEMCPY_CHAN); + memcpy_scb = dma_alloc_coherent(memcpy_parent->ddev.dev, + sizeof(*memcpy_scb), + &memcpy_scb_dma, GFP_KERNEL); + if (!memcpy_scb) + dev_warn(&pdev->dev, + "Failed to allocated memcpy scb\n"); - /* Grab channel 14 for the 40-bit DMA memcpy */ - chans_available &= ~BIT(14); - memcpy_chan = BCM2835_DMA_CHANIO(base, 14); + chans_available &= ~BIT(BCM2838_DMA_MEMCPY_CHAN); + } /* get irqs for each channel that we support */ - for (i = 0; i <= BCM2835_DMA_MAX_DMA_CHAN_SUPPORTED; i++) { + for (i = chan_start; i < chan_end; i++) { /* skip masked out channels */ if (!(chans_available & (1 << i))) { irq[i] = -1; @@ -1097,13 +1311,17 @@ static int bcm2835_dma_probe(struct plat irq[i] = platform_get_irq(pdev, i < 11 ? i : 11); } + chan_count = 0; + /* get irqs for each channel */ - for (i = 0; i <= BCM2835_DMA_MAX_DMA_CHAN_SUPPORTED; i++) { + for (i = chan_start; i < chan_end; i++) { /* skip channels without irq */ if (irq[i] < 0) continue; /* check if there are other channels that also use this irq */ + /* FIXME: This will fail if interrupts are shared across + instances */ irq_flags = 0; for (j = 0; j <= BCM2835_DMA_MAX_DMA_CHAN_SUPPORTED; j++) if ((i != j) && (irq[j] == irq[i])) { @@ -1115,9 +1333,10 @@ static int bcm2835_dma_probe(struct plat rc = bcm2835_dma_chan_init(od, i, irq[i], irq_flags); if (rc) goto err_no_dma; + chan_count++; } - dev_dbg(&pdev->dev, "Initialized %i DMA channels\n", i); + dev_dbg(&pdev->dev, "Initialized %i DMA channels\n", chan_count); /* Device-tree DMA controller registration */ rc = of_dma_controller_register(pdev->dev.of_node, @@ -1149,6 +1368,13 @@ static int bcm2835_dma_remove(struct pla bcm_dmaman_remove(pdev); dma_async_device_unregister(&od->ddev); + if (memcpy_parent == od) { + dma_free_coherent(&pdev->dev, sizeof(*memcpy_scb), memcpy_scb, + memcpy_scb_dma); + memcpy_parent = NULL; + memcpy_scb = NULL; + memcpy_chan = NULL; + } bcm2835_dma_free(od); return 0; --- a/drivers/pci/controller/pcie-brcmstb-bounce.c +++ b/drivers/pci/controller/pcie-brcmstb-bounce.c @@ -91,7 +91,7 @@ struct dmabounce_device_info { static struct dmabounce_device_info *g_dmabounce_device_info; -extern int bcm2838_dma40_memcpy_init(struct device *dev); +extern int bcm2838_dma40_memcpy_init(void); extern void bcm2838_dma40_memcpy(dma_addr_t dst, dma_addr_t src, size_t size); #ifdef STATS @@ -471,9 +471,9 @@ static const struct dma_map_ops dmabounc .mapping_error = dmabounce_mapping_error, }; -int brcm_pcie_bounce_register_dev(struct device *dev, - unsigned long buffer_size, - dma_addr_t threshold) +int brcm_pcie_bounce_init(struct device *dev, + unsigned long buffer_size, + dma_addr_t threshold) { struct dmabounce_device_info *device_info; int ret; @@ -482,9 +482,9 @@ int brcm_pcie_bounce_register_dev(struct if (g_dmabounce_device_info) return -EBUSY; - ret = bcm2838_dma40_memcpy_init(dev); + ret = bcm2838_dma40_memcpy_init(); if (ret) - return ret; + return ret; device_info = kmalloc(sizeof(struct dmabounce_device_info), GFP_ATOMIC); if (!device_info) { @@ -515,9 +515,8 @@ int brcm_pcie_bounce_register_dev(struct device_create_file(dev, &dev_attr_dmabounce_stats)); g_dmabounce_device_info = device_info; - set_dma_ops(dev, &dmabounce_ops); - dev_info(dev, "dmabounce: registered device - %ld kB, threshold %pad\n", + dev_info(dev, "dmabounce: initialised - %ld kB, threshold %pad\n", buffer_size / 1024, &threshold); return 0; @@ -526,14 +525,13 @@ int brcm_pcie_bounce_register_dev(struct kfree(device_info); return ret; } -EXPORT_SYMBOL(brcm_pcie_bounce_register_dev); +EXPORT_SYMBOL(brcm_pcie_bounce_init); -void brcm_pcie_bounce_unregister_dev(struct device *dev) +void brcm_pcie_bounce_uninit(struct device *dev) { struct dmabounce_device_info *device_info = g_dmabounce_device_info; g_dmabounce_device_info = NULL; - set_dma_ops(dev, NULL); if (!device_info) { dev_warn(dev, @@ -554,10 +552,16 @@ void brcm_pcie_bounce_unregister_dev(str device_remove_file(dev, &dev_attr_dmabounce_stats)); kfree(device_info); +} +EXPORT_SYMBOL(brcm_pcie_bounce_uninit); + +int brcm_pcie_bounce_register_dev(struct device *dev) +{ + set_dma_ops(dev, &dmabounce_ops); - dev_info(dev, "dmabounce: device unregistered\n"); + return 0; } -EXPORT_SYMBOL(brcm_pcie_bounce_unregister_dev); +EXPORT_SYMBOL(brcm_pcie_bounce_register_dev); MODULE_AUTHOR("Phil Elwell "); MODULE_DESCRIPTION("Dedicate DMA bounce support for pcie-brcmstb"); --- a/drivers/pci/controller/pcie-brcmstb-bounce.h +++ b/drivers/pci/controller/pcie-brcmstb-bounce.h @@ -8,21 +8,26 @@ #ifdef CONFIG_ARM -int brcm_pcie_bounce_register_dev(struct device *dev, unsigned long buffer_size, - dma_addr_t threshold); - -int brcm_pcie_bounce_unregister_dev(struct device *dev); +int brcm_pcie_bounce_init(struct device *dev, unsigned long buffer_size, + dma_addr_t threshold); +int brcm_pcie_bounce_uninit(struct device *dev); +int brcm_pcie_bounce_register_dev(struct device *dev); #else -static inline int brcm_pcie_bounce_register_dev(struct device *dev, - unsigned long buffer_size, - dma_addr_t threshold) +static inline int brcm_pcie_bounce_init(struct device *dev, + unsigned long buffer_size, + dma_addr_t threshold) +{ + return 0; +} + +static inline int brcm_pcie_bounce_uninit(struct device *dev) { return 0; } -static inline int brcm_pcie_bounce_unregister_dev(struct device *dev) +static inline int brcm_pcie_bounce_register_dev(struct device *dev) { return 0; } --- a/drivers/pci/controller/pcie-brcmstb.c +++ b/drivers/pci/controller/pcie-brcmstb.c @@ -650,6 +650,7 @@ static void brcm_set_dma_ops(struct devi static inline void brcm_pcie_perst_set(struct brcm_pcie *pcie, unsigned int val); + static int brcmstb_platform_notifier(struct notifier_block *nb, unsigned long event, void *__dev) { @@ -663,12 +664,11 @@ static int brcmstb_platform_notifier(str strcmp(dev->kobj.name, rc_name)) { int ret; - ret = brcm_pcie_bounce_register_dev(dev, bounce_buffer, - (dma_addr_t)bounce_threshold); + ret = brcm_pcie_bounce_register_dev(dev); if (ret) { dev_err(dev, "brcm_pcie_bounce_register_dev() failed: %d\n", - ret); + ret); return ret; } } @@ -681,8 +681,6 @@ static int brcmstb_platform_notifier(str brcm_pcie_perst_set(g_pcie, 1); msleep(100); brcm_pcie_perst_set(g_pcie, 0); - } else if (max_pfn > (bounce_threshold/PAGE_SIZE)) { - brcm_pcie_bounce_unregister_dev(dev); } return NOTIFY_OK; @@ -1718,6 +1716,7 @@ static int brcm_pcie_probe(struct platfo void __iomem *base; struct pci_host_bridge *bridge; struct pci_bus *child; + extern unsigned long max_pfn; bridge = devm_pci_alloc_host_bridge(&pdev->dev, sizeof(*pcie)); if (!bridge) @@ -1753,6 +1752,20 @@ static int brcm_pcie_probe(struct platfo if (IS_ERR(base)) return PTR_ERR(base); + /* To Do: Add hardware check if this ever gets fixed */ + if (max_pfn > (bounce_threshold/PAGE_SIZE)) { + int ret; + ret = brcm_pcie_bounce_init(&pdev->dev, bounce_buffer, + (dma_addr_t)bounce_threshold); + if (ret) { + if (ret != -EPROBE_DEFER) + dev_err(&pdev->dev, + "could not init bounce buffers: %d\n", + ret); + return ret; + } + } + pcie->clk = of_clk_get_by_name(dn, "sw_pcie"); if (IS_ERR(pcie->clk)) { dev_warn(&pdev->dev, "could not get clock\n");