From e6a56923caeb2d27d86d049cf11a3af6cf6dd6e7 Mon Sep 17 00:00:00 2001 From: Stefan Wahren Date: Sat, 4 May 2019 17:06:15 +0200 Subject: [PATCH 537/773] hwrng: iproc-rng200: Add BCM2838 support The HWRNG on the BCM2838 is compatible to iproc-rng200, so add the support to this driver instead of bcm2835-rng. Signed-off-by: Stefan Wahren --- drivers/char/hw_random/Kconfig | 4 +- drivers/char/hw_random/iproc-rng200.c | 81 +++++++++++++++++++++++++-- 2 files changed, 79 insertions(+), 6 deletions(-) --- a/drivers/char/hw_random/Kconfig +++ b/drivers/char/hw_random/Kconfig @@ -89,11 +89,11 @@ config HW_RANDOM_BCM2835 config HW_RANDOM_IPROC_RNG200 tristate "Broadcom iProc/STB RNG200 support" - depends on ARCH_BCM_IPROC || ARCH_BRCMSTB + depends on ARCH_BCM_IPROC || ARCH_BCM2835 || ARCH_BRCMSTB default HW_RANDOM ---help--- This driver provides kernel-side support for the RNG200 - hardware found on the Broadcom iProc and STB SoCs. + hardware found on the Broadcom iProc, BCM2838 and STB SoCs. To compile this driver as a module, choose M here: the module will be called iproc-rng200 --- a/drivers/char/hw_random/iproc-rng200.c +++ b/drivers/char/hw_random/iproc-rng200.c @@ -29,6 +29,7 @@ #define RNG_CTRL_RNG_RBGEN_MASK 0x00001FFF #define RNG_CTRL_RNG_RBGEN_ENABLE 0x00000001 #define RNG_CTRL_RNG_RBGEN_DISABLE 0x00000000 +#define RNG_CTRL_RNG_DIV_CTRL_SHIFT 13 #define RNG_SOFT_RESET_OFFSET 0x04 #define RNG_SOFT_RESET 0x00000001 @@ -36,16 +37,23 @@ #define RBG_SOFT_RESET_OFFSET 0x08 #define RBG_SOFT_RESET 0x00000001 +#define RNG_TOTAL_BIT_COUNT_OFFSET 0x0C + +#define RNG_TOTAL_BIT_COUNT_THRESHOLD_OFFSET 0x10 + #define RNG_INT_STATUS_OFFSET 0x18 #define RNG_INT_STATUS_MASTER_FAIL_LOCKOUT_IRQ_MASK 0x80000000 #define RNG_INT_STATUS_STARTUP_TRANSITIONS_MET_IRQ_MASK 0x00020000 #define RNG_INT_STATUS_NIST_FAIL_IRQ_MASK 0x00000020 #define RNG_INT_STATUS_TOTAL_BITS_COUNT_IRQ_MASK 0x00000001 +#define RNG_INT_ENABLE_OFFSET 0x1C + #define RNG_FIFO_DATA_OFFSET 0x20 #define RNG_FIFO_COUNT_OFFSET 0x24 #define RNG_FIFO_COUNT_RNG_FIFO_COUNT_MASK 0x000000FF +#define RNG_FIFO_COUNT_RNG_FIFO_THRESHOLD_SHIFT 8 struct iproc_rng200_dev { struct hwrng rng; @@ -166,6 +174,64 @@ static int iproc_rng200_init(struct hwrn return 0; } +static int bcm2838_rng200_read(struct hwrng *rng, void *buf, size_t max, + bool wait) +{ + struct iproc_rng200_dev *priv = to_rng_priv(rng); + u32 max_words = max / sizeof(u32); + u32 num_words, count, val; + + /* ensure warm up period has elapsed */ + while (1) { + val = ioread32(priv->base + RNG_TOTAL_BIT_COUNT_OFFSET); + if (val > 16) + break; + cpu_relax(); + } + + /* ensure fifo is not empty */ + while (1) { + num_words = ioread32(priv->base + RNG_FIFO_COUNT_OFFSET) & + RNG_FIFO_COUNT_RNG_FIFO_COUNT_MASK; + if (num_words) + break; + if (!wait) + return 0; + cpu_relax(); + } + + if (num_words > max_words) + num_words = max_words; + + for (count = 0; count < num_words; count++) { + ((u32 *)buf)[count] = ioread32(priv->base + + RNG_FIFO_DATA_OFFSET); + } + + return num_words * sizeof(u32); +} + +static int bcm2838_rng200_init(struct hwrng *rng) +{ + struct iproc_rng200_dev *priv = to_rng_priv(rng); + uint32_t val; + + if (ioread32(priv->base + RNG_CTRL_OFFSET) & RNG_CTRL_RNG_RBGEN_MASK) + return 0; + + /* initial numbers generated are "less random" so will be discarded */ + val = 0x40000; + iowrite32(val, priv->base + RNG_TOTAL_BIT_COUNT_THRESHOLD_OFFSET); + /* min fifo count to generate full interrupt */ + val = 2 << RNG_FIFO_COUNT_RNG_FIFO_THRESHOLD_SHIFT; + iowrite32(val, priv->base + RNG_FIFO_COUNT_OFFSET); + /* enable the rng - 1Mhz sample rate */ + val = (0x3 << RNG_CTRL_RNG_DIV_CTRL_SHIFT) | RNG_CTRL_RNG_RBGEN_MASK; + iowrite32(val, priv->base + RNG_CTRL_OFFSET); + + return 0; +} + static void iproc_rng200_cleanup(struct hwrng *rng) { struct iproc_rng200_dev *priv = to_rng_priv(rng); @@ -202,10 +268,16 @@ static int iproc_rng200_probe(struct pla return PTR_ERR(priv->base); } - priv->rng.name = "iproc-rng200", - priv->rng.read = iproc_rng200_read, - priv->rng.init = iproc_rng200_init, - priv->rng.cleanup = iproc_rng200_cleanup, + priv->rng.name = pdev->name; + priv->rng.cleanup = iproc_rng200_cleanup; + + if (of_device_is_compatible(dev->of_node, "brcm,bcm2838-rng200")) { + priv->rng.init = bcm2838_rng200_init; + priv->rng.read = bcm2838_rng200_read; + } else { + priv->rng.init = iproc_rng200_init; + priv->rng.read = iproc_rng200_read; + } /* Register driver */ ret = devm_hwrng_register(dev, &priv->rng); @@ -222,6 +294,7 @@ static int iproc_rng200_probe(struct pla static const struct of_device_id iproc_rng200_of_match[] = { { .compatible = "brcm,bcm7278-rng200", }, { .compatible = "brcm,iproc-rng200", }, + { .compatible = "brcm,bcm2838-rng200"}, {}, }; MODULE_DEVICE_TABLE(of, iproc_rng200_of_match);