From 1d3aeba25b10d1ed2b5ae4cf0b535d821539a531 Mon Sep 17 00:00:00 2001 From: Annaliese McDermond Date: Sun, 17 Mar 2019 16:48:36 -0700 Subject: [PATCH 415/806] dtoverlays: Add Support for the UDRC/DRAWS Adds a new overlay to support the Northwest Digital Radio DRAWS and UDRC HATs. See http://nwdigitalradio.com. Signed-off-by: Annaliese McDermond --- arch/arm/boot/dts/overlays/Makefile | 2 + arch/arm/boot/dts/overlays/README | 59 ++++++ arch/arm/boot/dts/overlays/draws-overlay.dts | 200 +++++++++++++++++++ arch/arm/boot/dts/overlays/udrc-overlay.dts | 128 ++++++++++++ 4 files changed, 389 insertions(+) create mode 100644 arch/arm/boot/dts/overlays/draws-overlay.dts create mode 100644 arch/arm/boot/dts/overlays/udrc-overlay.dts --- a/arch/arm/boot/dts/overlays/Makefile +++ b/arch/arm/boot/dts/overlays/Makefile @@ -29,6 +29,7 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \ dionaudio-loco-v2.dtbo \ dpi18.dtbo \ dpi24.dtbo \ + draws.dtbo \ dwc-otg.dtbo \ dwc2.dtbo \ enc28j60.dtbo \ @@ -146,6 +147,7 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \ tpm-slb9670.dtbo \ uart0.dtbo \ uart1.dtbo \ + udrc.dtbo \ upstream.dtbo \ upstream-aux-interrupt.dtbo \ vc4-fkms-v3d.dtbo \ --- a/arch/arm/boot/dts/overlays/README +++ b/arch/arm/boot/dts/overlays/README @@ -531,6 +531,59 @@ Load: dtoverlay=dpi24 Params: +Name: draws +Info: Configures the NW Digital Radio DRAWS Hat + + The board includes an ADC to measure various board values and also + provides two analog user inputs on the expansion header. The ADC + can be configured for various sample rates and gain values to adjust + the input range. Tables describing the two parameters follow. + + ADC Gain Values: + 0 = +/- 6.144V + 1 = +/- 4.096V + 2 = +/- 2.048V + 3 = +/- 1.024V + 4 = +/- 0.512V + 5 = +/- 0.256V + 6 = +/- 0.256V + 7 = +/- 0.256V + + ADC Datarate Values: + 0 = 128sps + 1 = 250sps + 2 = 490sps + 3 = 920sps + 4 = 1600sps (default) + 5 = 2400sps + 6 = 3300sps + 7 = 3300sps +Load: dtoverlay=draws,= +Params: draws_adc_ch4_gain Sets the full scale resolution of the ADCs + input voltage sensor (default 1) + + draws_adc_ch4_datarate Sets the datarate of the ADCs input voltage + sensor + + draws_adc_ch5_gain Sets the full scale resolution of the ADCs + 5V rail voltage sensor (default 1) + + draws_adc_ch5_datarate Sets the datarate of the ADCs 4V rail voltage + sensor + + draws_adc_ch6_gain Sets the full scale resolution of the ADCs + AIN2 input (default 2) + + draws_adc_ch6_datarate Sets the datarate of the ADCs AIN2 input + + draws_adc_ch7_gain Sets the full scale resolution of the ADCs + AIN3 input (default 2) + + draws_adc_ch7_datarate Sets the datarate of the ADCs AIN3 input + + alsaname Name of the ALSA audio device (default "draws") + + Name: dwc-otg Info: Selects the dwc_otg USB controller driver which has fiq support. This is the default on all except the Pi Zero which defaults to dwc2. @@ -2117,6 +2170,12 @@ Params: txd1_pin GPIO pin rxd1_pin GPIO pin for RXD1 (15, 33 or 41 - default 15) +Name: udrc +Info: Configures the NW Digital Radio UDRC Hat +Load: dtoverlay=udrc,= +Params: alsaname Name of the ALSA audio device (default "udrc") + + Name: upstream Info: Allow usage of downstream .dtb with upstream kernel. Comprises vc4-kms-v3d, dwc2 and upstream-aux-interrupt overlays. --- /dev/null +++ b/arch/arm/boot/dts/overlays/draws-overlay.dts @@ -0,0 +1,200 @@ +#include +/* + * Device tree overlay for the DRAWS Hardware + */ + +/dts-v1/; +/plugin/; + +/ { + compatible = "brcm,bcm2835", "brcm,bcm2836", "brcm,bcm2708", "brcm,bcm2709"; + fragment@0 { + target = <&i2s>; + __overlay__ { + status = "okay"; + }; + }; + + fragment@1 { + target-path = "/"; + __overlay__ { + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + udrc0_ldoin: udrc0_ldoin { + compatible = "regulator-fixed"; + regulator-name = "ldoin"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; + + pps: pps { + compatible = "pps-gpio"; + pinctrl-names = "default"; + pinctrl-0 = <&pps_pins>; + gpios = <&gpio 7 0>; + status = "okay"; + }; + }; + }; + + fragment@2 { + target = <&i2c_arm>; + __overlay__ { + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + tlv320aic32x4: tlv320aic32x4@18 { + compatible = "ti,tlv320aic32x4"; + reg = <0x18>; + #sound-dai-cells = <0>; + status = "okay"; + + clocks = <&clocks BCM2835_CLOCK_GP0>; + clock-names = "mclk"; + assigned-clocks = <&clocks BCM2835_CLOCK_GP0>; + assigned-clock-rates = <25000000>; + + pinctrl-names = "default"; + pinctrl-0 = <&gpclk0_pin &aic3204_reset>; + + reset-gpios = <&gpio 13 0>; + + iov-supply = <&udrc0_ldoin>; + ldoin-supply = <&udrc0_ldoin>; + }; + + sc16is752: sc16is752@50 { + compatible = "nxp,sc16is752"; + reg = <0x50>; + clocks = <&sc16is752_clk>; + interrupt-parent = <&gpio>; + interrupts = <17 2>; /* IRQ_TYPE_EDGE_FALLING */ + + pinctrl-names = "default"; + pinctrl-0 = <&sc16is752_irq>; + + sc16is752_clk: sc16is752_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <1843200>; + }; + }; + + tla2024: tla2024@48 { + compatible = "ti,ads1015"; + reg = <0x48>; + #address-cells = <1>; + #size-cells = <0>; + + adc_ch4: channel@4 { + reg = <4>; + ti,gain = <1>; + ti,datarate = <4>; + }; + + adc_ch5: channel@5 { + reg = <5>; + ti,gain = <1>; + ti,datarate = <4>; + }; + + adc_ch6: channel@6 { + reg = <6>; + ti,gain = <2>; + ti,datarate = <4>; + }; + + adc_ch7: channel@7 { + reg = <7>; + ti,gain = <2>; + ti,datarate = <4>; + }; + }; + }; + }; + + fragment@3 { + target = <&sound>; + snd: __overlay__ { + compatible = "simple-audio-card"; + i2s-controller = <&i2s>; + status = "okay"; + + simple-audio-card,name = "draws"; + simple-audio-card,format = "i2s"; + + simple-audio-card,bitclock-master = <&dailink0_master>; + simple-audio-card,frame-master = <&dailink0_master>; + + simple-audio-card,widgets = + "Line", "Line In", + "Line", "Line Out"; + + simple-audio-card,routing = + "IN1_R", "Line In", + "IN1_L", "Line In", + "CM_L", "Line In", + "CM_R", "Line In", + "Line Out", "LOR", + "Line Out", "LOL"; + + dailink0_master: simple-audio-card,cpu { + sound-dai = <&i2s>; + }; + + simple-audio-card,codec { + sound-dai = <&tlv320aic32x4>; + }; + }; + }; + + fragment@4 { + target = <&gpio>; + __overlay__ { + gpclk0_pin: gpclk0_pin { + brcm,pins = <4>; + brcm,function = <4>; + }; + + aic3204_reset: aic3204_reset { + brcm,pins = <13>; + brcm,function = <1>; + brcm,pull = <1>; + }; + + aic3204_gpio: aic3204_gpio { + brcm,pins = <26>; + }; + + sc16is752_irq: sc16is752_irq { + brcm,pins = <17>; + brcm,function = <0>; + brcm,pull = <2>; + }; + + pps_pins: pps_pins { + brcm,pins = <7>; + brcm,function = <0>; + brcm,pull = <0>; + }; + }; + }; + + __overrides__ { + draws_adc_ch4_gain = <&adc_ch4>,"ti,gain:0"; + draws_adc_ch4_datarate = <&adc_ch4>,"ti,datarate:0"; + draws_adc_ch5_gain = <&adc_ch5>,"ti,gain:0"; + draws_adc_ch5_datarate = <&adc_ch5>,"ti,datarate:0"; + draws_adc_ch6_gain = <&adc_ch6>,"ti,gain:0"; + draws_adc_ch6_datarate = <&adc_ch6>,"ti,datarate:0"; + draws_adc_ch7_gain = <&adc_ch7>,"ti,gain:0"; + draws_adc_ch7_datarate = <&adc_ch7>,"ti,datarate:0"; + alsaname = <&snd>, "simple-audio-card,name"; + }; +}; --- /dev/null +++ b/arch/arm/boot/dts/overlays/udrc-overlay.dts @@ -0,0 +1,128 @@ +#include +/* + * Device tree overlay for the Universal Digital Radio Controller + */ + +/dts-v1/; +/plugin/; + +/ { + compatible = "brcm,bcm2835", "brcm,bcm2836", "brcm,bcm2708", "brcm,bcm2709"; + fragment@0 { + target = <&i2s>; + __overlay__ { + clocks = <&clocks BCM2835_CLOCK_PCM>; + clock-names = "pcm"; + status = "okay"; + }; + }; + + fragment@1 { + target-path = "/"; + __overlay__ { + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + udrc0_ldoin: udrc0_ldoin { + compatible = "regulator-fixed"; + regulator-name = "ldoin"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; + }; + }; + + fragment@2 { + target = <&i2c1>; + __overlay__ { + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + clocks = <&clocks BCM2835_CLOCK_VPU>; + clock-frequency = <400000>; + + tlv320aic32x4: tlv320aic32x4@18 { + compatible = "ti,tlv320aic32x4"; + #sound-dai-cells = <0>; + reg = <0x18>; + status = "okay"; + + clocks = <&clocks BCM2835_CLOCK_GP0>; + clock-names = "mclk"; + assigned-clocks = <&clocks BCM2835_CLOCK_GP0>; + assigned-clock-rates = <25000000>; + + pinctrl-names = "default"; + pinctrl-0 = <&gpclk0_pin &aic3204_reset>; + + reset-gpios = <&gpio 13 0>; + + iov-supply = <&udrc0_ldoin>; + ldoin-supply = <&udrc0_ldoin>; + }; + }; + }; + + fragment@3 { + target = <&sound>; + snd: __overlay__ { + compatible = "simple-audio-card"; + i2s-controller = <&i2s>; + status = "okay"; + + simple-audio-card,name = "udrc"; + simple-audio-card,format = "i2s"; + + simple-audio-card,bitclock-master = <&dailink0_master>; + simple-audio-card,frame-master = <&dailink0_master>; + + simple-audio-card,widgets = + "Line", "Line In", + "Line", "Line Out"; + + simple-audio-card,routing = + "IN1_R", "Line In", + "IN1_L", "Line In", + "CM_L", "Line In", + "CM_R", "Line In", + "Line Out", "LOR", + "Line Out", "LOL"; + + dailink0_master: simple-audio-card,cpu { + sound-dai = <&i2s>; + }; + + simple-audio-card,codec { + sound-dai = <&tlv320aic32x4>; + }; + }; + }; + + fragment@4 { + target = <&gpio>; + __overlay__ { + gpclk0_pin: gpclk0_pin { + brcm,pins = <4>; + brcm,function = <4>; + }; + + aic3204_reset: aic3204_reset { + brcm,pins = <13>; + brcm,function = <1>; + brcm,pull = <1>; + }; + + aic3204_gpio: aic3204_gpio { + brcm,pins = <26>; + }; + }; + }; + + __overrides__ { + alsaname = <&snd>, "simple-audio-card,name"; + }; +};