From af6f3cf33a864c397f6ab43c0403b0a92797694e Mon Sep 17 00:00:00 2001 From: Phil Elwell Date: Thu, 14 Jun 2018 11:21:04 +0100 Subject: [PATCH 132/725] irqchip: irq-bcm2835: Calc. FIQ_START at boot-time ad83c7cb2f37 ("irqchip/irq-bcm2836: Add support for DT interrupt polarity") changed the way that the BCM2836/7 local interrupts are mapped; instead of being pre-mapped they are now mapped on-demand. A side effect of this change is that the call to irq_of_parse_and_map from armctrl_of_init creates a new mapping, forming a gap between the IRQs and the FIQs. This gap breaks the FIQ<->IRQ mapping which up to now has been done by assuming: 1) that the value of FIQ_START is the same as the number of normal IRQs that will be mapped (still true), and 2) that this value is also the offset between an IRQ and its equivalent FIQ (which is no longer the case). Remove both assumptions by measuring the interval between the last IRQ and the last FIQ, passing it as the parameter to init_FIQ(). Fixes: https://github.com/raspberrypi/linux/issues/2432 Signed-off-by: Phil Elwell --- drivers/irqchip/irq-bcm2835.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) --- a/drivers/irqchip/irq-bcm2835.c +++ b/drivers/irqchip/irq-bcm2835.c @@ -82,8 +82,6 @@ #define NR_BANKS 3 #define IRQS_PER_BANK 32 #define NUMBER_IRQS MAKE_HWIRQ(NR_BANKS, 0) -#undef FIQ_START -#define FIQ_START (NR_IRQS_BANK0 + MAKE_HWIRQ(NR_BANKS - 1, 0)) static const int reg_pending[] __initconst = { 0x00, 0x04, 0x08 }; static const int reg_enable[] __initconst = { 0x18, 0x10, 0x14 }; @@ -211,7 +209,7 @@ static int __init armctrl_of_init(struct bool is_2836) { void __iomem *base; - int irq, b, i; + int irq = 0, last_irq, b, i; base = of_iomap(node, 0); if (!base) @@ -237,6 +235,8 @@ static int __init armctrl_of_init(struct } } + last_irq = irq; + if (is_2836) { int parent_irq = irq_of_parse_and_map(node, 0); @@ -267,7 +267,7 @@ static int __init armctrl_of_init(struct } } #ifndef CONFIG_ARM64 - init_FIQ(FIQ_START); + init_FIQ(irq - last_irq); #endif return 0;