From 7da0618348811dbb38825457f63e12d3b8ba943f Mon Sep 17 00:00:00 2001 From: gellert Date: Fri, 15 Aug 2014 16:35:06 +0100 Subject: [PATCH 058/114] MMC: added alternative MMC driver --- arch/arm/configs/bcmrpi_defconfig | 2 + arch/arm/mach-bcm2708/bcm2708.c | 31 + drivers/mmc/host/Kconfig | 40 +- drivers/mmc/host/Makefile | 1 + drivers/mmc/host/bcm2835-mmc.c | 1557 +++++++++++++++++++++++++++++++++++++ 5 files changed, 1620 insertions(+), 11 deletions(-) create mode 100644 drivers/mmc/host/bcm2835-mmc.c diff --git a/arch/arm/configs/bcmrpi_defconfig b/arch/arm/configs/bcmrpi_defconfig index f15a4b9..c363a10 100644 --- a/arch/arm/configs/bcmrpi_defconfig +++ b/arch/arm/configs/bcmrpi_defconfig @@ -908,6 +908,8 @@ CONFIG_MMC=y CONFIG_MMC_BLOCK_MINORS=32 CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_PLTFM=y +CONFIG_MMC_BCM2835=y +CONFIG_MMC_BCM2835_DMA=y CONFIG_MMC_SPI=m CONFIG_LEDS_CLASS=y CONFIG_LEDS_GPIO=y diff --git a/arch/arm/mach-bcm2708/bcm2708.c b/arch/arm/mach-bcm2708/bcm2708.c index b45f327..5ff1299 100644 --- a/arch/arm/mach-bcm2708/bcm2708.c +++ b/arch/arm/mach-bcm2708/bcm2708.c @@ -414,6 +414,34 @@ static struct platform_device bcm2708_systemtimer_device = { }, }; +#ifdef CONFIG_MMC_BCM2835 /* Arasan emmc SD (new) */ +static struct resource bcm2835_emmc_resources[] = { + [0] = { + .start = EMMC_BASE, + .end = EMMC_BASE + SZ_256 - 1, /* we only need this area */ + /* the memory map actually makes SZ_4K available */ + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_ARASANSDIO, + .end = IRQ_ARASANSDIO, + .flags = IORESOURCE_IRQ, + }, +}; + +static u64 bcm2835_emmc_dmamask = 0xffffffffUL; + +struct platform_device bcm2835_emmc_device = { + .name = "mmc-bcm2835", + .id = 0, + .num_resources = ARRAY_SIZE(bcm2835_emmc_resources), + .resource = bcm2835_emmc_resources, + .dev = { + .dma_mask = &bcm2835_emmc_dmamask, + .coherent_dma_mask = 0xffffffffUL}, +}; +#endif /* CONFIG_MMC_BCM2835 */ + static struct resource bcm2708_powerman_resources[] = { [0] = { .start = PM_BASE, @@ -794,6 +822,9 @@ void __init bcm2708_init(void) bcm_register_device(&bcm2708_uart1_device); bcm_register_device(&bcm2708_powerman_device); +#ifdef CONFIG_MMC_BCM2835 + bcm_register_device(&bcm2835_emmc_device); +#endif bcm2708_init_led(); for (i = 0; i < ARRAY_SIZE(bcm2708_alsa_devices); i++) bcm_register_device(&bcm2708_alsa_devices[i]); diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig index 1386065..977aeef 100644 --- a/drivers/mmc/host/Kconfig +++ b/drivers/mmc/host/Kconfig @@ -281,17 +281,6 @@ config MMC_SDHCI_BCM_KONA If you have a controller with this interface, say Y or M here. -config MMC_SDHCI_BCM2835 - tristate "SDHCI platform support for the BCM2835 SD/MMC Controller" - depends on ARCH_BCM2835 - depends on MMC_SDHCI_PLTFM - select MMC_SDHCI_IO_ACCESSORS - help - This selects the BCM2835 SD/MMC controller. If you have a BCM2835 - platform with SD or MMC devices, say Y or M here. - - If unsure, say N. - config MMC_MOXART tristate "MOXART SD/MMC Host Controller support" depends on ARCH_MOXART && MMC @@ -313,6 +302,35 @@ config MMC_SDHCI_ST If you have a controller with this interface, say Y or M here. If unsure, say N. +config MMC_BCM2835 + tristate "MMC support on BCM2835" + depends on MACH_BCM2708 + help + This selects the MMC Interface on BCM2835. + + If you have a controller with this interface, say Y or M here. + + If unsure, say N. + +config MMC_BCM2835_DMA + bool "DMA support on BCM2835 Arasan controller" + depends on MMC_BCM2835 + help + Enable DMA support on the Arasan SDHCI controller in Broadcom 2708 + based chips. + + If unsure, say N. + +config MMC_BCM2835_PIO_DMA_BARRIER + int "Block count limit for PIO transfers" + depends on MMC_BCM2835 && MMC_BCM2835_DMA + range 0 256 + default 2 + help + The inclusive limit in bytes under which PIO will be used instead of DMA + + If unsure, say 2 here. + config MMC_OMAP tristate "TI OMAP Multimedia Card Interface support" depends on ARCH_OMAP diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile index b09ecfb..7b17387 100644 --- a/drivers/mmc/host/Makefile +++ b/drivers/mmc/host/Makefile @@ -17,6 +17,7 @@ obj-$(CONFIG_MMC_SDHCI_PXAV2) += sdhci-pxav2.o obj-$(CONFIG_MMC_SDHCI_S3C) += sdhci-s3c.o obj-$(CONFIG_MMC_SDHCI_SIRF) += sdhci-sirf.o obj-$(CONFIG_MMC_SDHCI_SPEAR) += sdhci-spear.o +obj-$(CONFIG_MMC_BCM2835) += bcm2835-mmc.o obj-$(CONFIG_MMC_WBSD) += wbsd.o obj-$(CONFIG_MMC_AU1X) += au1xmmc.o obj-$(CONFIG_MMC_OMAP) += omap.o diff --git a/drivers/mmc/host/bcm2835-mmc.c b/drivers/mmc/host/bcm2835-mmc.c new file mode 100644 index 0000000..cefba7c --- /dev/null +++ b/drivers/mmc/host/bcm2835-mmc.c @@ -0,0 +1,1557 @@ +/* + * BCM2835 MMC host driver. + * + * Author: Gellert Weisz + * Copyright 2014 + * + * Based on + * sdhci-bcm2708.c by Broadcom + * sdhci-bcm2835.c by Stephen Warren and Oleksandr Tymoshenko + * sdhci.c and sdhci-pci.c by Pierre Ossman + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "sdhci.h" + + +#ifndef CONFIG_OF + #define BCM2835_CLOCK_FREQ 250000000 +#endif + +#define DRIVER_NAME "mmc-bcm2835" + +#define DBG(f, x...) \ +pr_debug(DRIVER_NAME " [%s()]: " f, __func__, ## x) + +#ifndef CONFIG_MMC_BCM2835_DMA + #define FORCE_PIO +#endif + + +/* the inclusive limit in bytes under which PIO will be used instead of DMA */ +#ifdef CONFIG_MMC_BCM2835_PIO_DMA_BARRIER +#define PIO_DMA_BARRIER CONFIG_MMC_BCM2835_PIO_DMA_BARRIER +#else +#define PIO_DMA_BARRIER 00 +#endif + +#define MIN_FREQ 400000 +#define TIMEOUT_VAL 0xE +#define BCM2835_SDHCI_WRITE_DELAY(f) (((2 * 1000000) / f) + 1) + +#ifndef BCM2708_PERI_BASE + #define BCM2708_PERI_BASE 0x20000000 +#endif + +/* FIXME: Needs IOMMU support */ +#define BCM2835_VCMMU_SHIFT (0x7E000000 - BCM2708_PERI_BASE) + + +struct bcm2835_host { + spinlock_t lock; + + void __iomem *ioaddr; + u32 phys_addr; + + struct mmc_host *mmc; + + u32 timeout; + + int clock; /* Current clock speed */ + u8 pwr; /* Current voltage */ + + unsigned int max_clk; /* Max possible freq */ + unsigned int timeout_clk; /* Timeout freq (KHz) */ + unsigned int clk_mul; /* Clock Muliplier value */ + + struct tasklet_struct finish_tasklet; /* Tasklet structures */ + + struct timer_list timer; /* Timer for timeouts */ + + struct sg_mapping_iter sg_miter; /* SG state for PIO */ + unsigned int blocks; /* remaining PIO blocks */ + + int irq; /* Device IRQ */ + + + u32 ier; /* cached registers */ + + struct mmc_request *mrq; /* Current request */ + struct mmc_command *cmd; /* Current command */ + struct mmc_data *data; /* Current data request */ + unsigned int data_early:1; /* Data finished before cmd */ + + wait_queue_head_t buf_ready_int; /* Waitqueue for Buffer Read Ready interrupt */ + + u32 thread_isr; + + u32 shadow; + + /*DMA part*/ + struct dma_chan *dma_chan_rx; /* DMA channel for reads */ + struct dma_chan *dma_chan_tx; /* DMA channel for writes */ + struct dma_async_tx_descriptor *tx_desc; /* descriptor */ + + bool have_dma; + bool use_dma; + /*end of DMA part*/ + + int max_delay; /* maximum length of time spent waiting */ + + int flags; /* Host attributes */ +#define SDHCI_USE_SDMA (1<<0) /* Host is SDMA capable */ +#define SDHCI_USE_ADMA (1<<1) /* Host is ADMA capable */ +#define SDHCI_REQ_USE_DMA (1<<2) /* Use DMA for this req. */ +#define SDHCI_DEVICE_DEAD (1<<3) /* Device unresponsive */ +#define SDHCI_AUTO_CMD12 (1<<6) /* Auto CMD12 support */ +#define SDHCI_AUTO_CMD23 (1<<7) /* Auto CMD23 support */ +#define SDHCI_PV_ENABLED (1<<8) /* Preset value enabled */ +#define SDHCI_SDIO_IRQ_ENABLED (1<<9) /* SDIO irq enabled */ +#define SDHCI_USE_PLATDMA (1<<12) /* Host uses 3rd party DMA */ +}; + + +static inline void bcm2835_mmc_writel(struct bcm2835_host *host, u32 val, int reg) +{ + writel(val, host->ioaddr + reg); + udelay(BCM2835_SDHCI_WRITE_DELAY(max(host->clock, MIN_FREQ))); +} + +static inline void mmc_raw_writel(struct bcm2835_host *host, u32 val, int reg) +{ + writel(val, host->ioaddr + reg); +} + +static inline u32 bcm2835_mmc_readl(struct bcm2835_host *host, int reg) +{ + return readl(host->ioaddr + reg); +} + +static inline void bcm2835_mmc_writew(struct bcm2835_host *host, u16 val, int reg) +{ + u32 oldval = (reg == SDHCI_COMMAND) ? host->shadow : + bcm2835_mmc_readl(host, reg & ~3); + u32 word_num = (reg >> 1) & 1; + u32 word_shift = word_num * 16; + u32 mask = 0xffff << word_shift; + u32 newval = (oldval & ~mask) | (val << word_shift); + + if (reg == SDHCI_TRANSFER_MODE) + host->shadow = newval; + else + bcm2835_mmc_writel(host, newval, reg & ~3); + +} + +static inline void bcm2835_mmc_writeb(struct bcm2835_host *host, u8 val, int reg) +{ + u32 oldval = bcm2835_mmc_readl(host, reg & ~3); + u32 byte_num = reg & 3; + u32 byte_shift = byte_num * 8; + u32 mask = 0xff << byte_shift; + u32 newval = (oldval & ~mask) | (val << byte_shift); + + bcm2835_mmc_writel(host, newval, reg & ~3); +} + + +static inline u16 bcm2835_mmc_readw(struct bcm2835_host *host, int reg) +{ + u32 val = bcm2835_mmc_readl(host, (reg & ~3)); + u32 word_num = (reg >> 1) & 1; + u32 word_shift = word_num * 16; + u32 word = (val >> word_shift) & 0xffff; + + return word; +} + +static inline u8 bcm2835_mmc_readb(struct bcm2835_host *host, int reg) +{ + u32 val = bcm2835_mmc_readl(host, (reg & ~3)); + u32 byte_num = reg & 3; + u32 byte_shift = byte_num * 8; + u32 byte = (val >> byte_shift) & 0xff; + + return byte; +} + +static void bcm2835_mmc_unsignal_irqs(struct bcm2835_host *host, u32 clear) +{ + u32 ier; + + ier = bcm2835_mmc_readl(host, SDHCI_SIGNAL_ENABLE); + ier &= ~clear; + /* change which requests generate IRQs - makes no difference to + the content of SDHCI_INT_STATUS, or the need to acknowledge IRQs */ + bcm2835_mmc_writel(host, ier, SDHCI_SIGNAL_ENABLE); +} + + +static void bcm2835_mmc_dumpregs(struct bcm2835_host *host) +{ + pr_debug(DRIVER_NAME ": =========== REGISTER DUMP (%s)===========\n", + mmc_hostname(host->mmc)); + + pr_debug(DRIVER_NAME ": Sys addr: 0x%08x | Version: 0x%08x\n", + bcm2835_mmc_readl(host, SDHCI_DMA_ADDRESS), + bcm2835_mmc_readw(host, SDHCI_HOST_VERSION)); + pr_debug(DRIVER_NAME ": Blk size: 0x%08x | Blk cnt: 0x%08x\n", + bcm2835_mmc_readw(host, SDHCI_BLOCK_SIZE), + bcm2835_mmc_readw(host, SDHCI_BLOCK_COUNT)); + pr_debug(DRIVER_NAME ": Argument: 0x%08x | Trn mode: 0x%08x\n", + bcm2835_mmc_readl(host, SDHCI_ARGUMENT), + bcm2835_mmc_readw(host, SDHCI_TRANSFER_MODE)); + pr_debug(DRIVER_NAME ": Present: 0x%08x | Host ctl: 0x%08x\n", + bcm2835_mmc_readl(host, SDHCI_PRESENT_STATE), + bcm2835_mmc_readb(host, SDHCI_HOST_CONTROL)); + pr_debug(DRIVER_NAME ": Power: 0x%08x | Blk gap: 0x%08x\n", + bcm2835_mmc_readb(host, SDHCI_POWER_CONTROL), + bcm2835_mmc_readb(host, SDHCI_BLOCK_GAP_CONTROL)); + pr_debug(DRIVER_NAME ": Wake-up: 0x%08x | Clock: 0x%08x\n", + bcm2835_mmc_readb(host, SDHCI_WAKE_UP_CONTROL), + bcm2835_mmc_readw(host, SDHCI_CLOCK_CONTROL)); + pr_debug(DRIVER_NAME ": Timeout: 0x%08x | Int stat: 0x%08x\n", + bcm2835_mmc_readb(host, SDHCI_TIMEOUT_CONTROL), + bcm2835_mmc_readl(host, SDHCI_INT_STATUS)); + pr_debug(DRIVER_NAME ": Int enab: 0x%08x | Sig enab: 0x%08x\n", + bcm2835_mmc_readl(host, SDHCI_INT_ENABLE), + bcm2835_mmc_readl(host, SDHCI_SIGNAL_ENABLE)); + pr_debug(DRIVER_NAME ": AC12 err: 0x%08x | Slot int: 0x%08x\n", + bcm2835_mmc_readw(host, SDHCI_ACMD12_ERR), + bcm2835_mmc_readw(host, SDHCI_SLOT_INT_STATUS)); + pr_debug(DRIVER_NAME ": Caps: 0x%08x | Caps_1: 0x%08x\n", + bcm2835_mmc_readl(host, SDHCI_CAPABILITIES), + bcm2835_mmc_readl(host, SDHCI_CAPABILITIES_1)); + pr_debug(DRIVER_NAME ": Cmd: 0x%08x | Max curr: 0x%08x\n", + bcm2835_mmc_readw(host, SDHCI_COMMAND), + bcm2835_mmc_readl(host, SDHCI_MAX_CURRENT)); + pr_debug(DRIVER_NAME ": Host ctl2: 0x%08x\n", + bcm2835_mmc_readw(host, SDHCI_HOST_CONTROL2)); + + pr_debug(DRIVER_NAME ": ===========================================\n"); +} + + +static void bcm2835_mmc_reset(struct bcm2835_host *host, u8 mask) +{ + unsigned long timeout; + + bcm2835_mmc_writeb(host, mask, SDHCI_SOFTWARE_RESET); + + if (mask & SDHCI_RESET_ALL) + host->clock = 0; + + /* Wait max 100 ms */ + timeout = 100; + + /* hw clears the bit when it's done */ + while (bcm2835_mmc_readb(host, SDHCI_SOFTWARE_RESET) & mask) { + if (timeout == 0) { + pr_err("%s: Reset 0x%x never completed.\n", + mmc_hostname(host->mmc), (int)mask); + bcm2835_mmc_dumpregs(host); + return; + } + timeout--; + mdelay(1); + } + + if (100-timeout > 10 && 100-timeout > host->max_delay) { + host->max_delay = 100-timeout; + pr_warning("Warning: MMC controller hung for %d ms\n", host->max_delay); + } +} + +static void bcm2835_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios); + +static void bcm2835_mmc_init(struct bcm2835_host *host, int soft) +{ + if (soft) + bcm2835_mmc_reset(host, SDHCI_RESET_CMD|SDHCI_RESET_DATA); + else + bcm2835_mmc_reset(host, SDHCI_RESET_ALL); + + host->ier = SDHCI_INT_BUS_POWER | SDHCI_INT_DATA_END_BIT | + SDHCI_INT_DATA_CRC | SDHCI_INT_DATA_TIMEOUT | + SDHCI_INT_INDEX | SDHCI_INT_END_BIT | SDHCI_INT_CRC | + SDHCI_INT_TIMEOUT | SDHCI_INT_DATA_END | + SDHCI_INT_RESPONSE; + + bcm2835_mmc_writel(host, host->ier, SDHCI_INT_ENABLE); + bcm2835_mmc_writel(host, host->ier, SDHCI_SIGNAL_ENABLE); + + if (soft) { + /* force clock reconfiguration */ + host->clock = 0; + bcm2835_mmc_set_ios(host->mmc, &host->mmc->ios); + } +} + + + +static void bcm2835_mmc_finish_data(struct bcm2835_host *host); + +static void bcm2835_mmc_dma_complete(void *param) +{ + struct bcm2835_host *host = param; + struct dma_chan *dma_chan; + unsigned long flags; + u32 dir_data; + + spin_lock_irqsave(&host->lock, flags); + + if (host->data && !(host->data->flags & MMC_DATA_WRITE)) { + /* otherwise handled in SDHCI IRQ */ + dma_chan = host->dma_chan_rx; + dir_data = DMA_FROM_DEVICE; + + dma_unmap_sg(dma_chan->device->dev, + host->data->sg, host->data->sg_len, + dir_data); + + bcm2835_mmc_finish_data(host); + } + + spin_unlock_irqrestore(&host->lock, flags); +} + +static void bcm2835_bcm2835_mmc_read_block_pio(struct bcm2835_host *host) +{ + unsigned long flags; + size_t blksize, len, chunk; + + u32 uninitialized_var(scratch); + u8 *buf; + + blksize = host->data->blksz; + chunk = 0; + + local_irq_save(flags); + + while (blksize) { + if (!sg_miter_next(&host->sg_miter)) + BUG(); + + len = min(host->sg_miter.length, blksize); + + blksize -= len; + host->sg_miter.consumed = len; + + buf = host->sg_miter.addr; + + while (len) { + if (chunk == 0) { + scratch = bcm2835_mmc_readl(host, SDHCI_BUFFER); + chunk = 4; + } + + *buf = scratch & 0xFF; + + buf++; + scratch >>= 8; + chunk--; + len--; + } + } + + sg_miter_stop(&host->sg_miter); + + local_irq_restore(flags); +} + +static void bcm2835_bcm2835_mmc_write_block_pio(struct bcm2835_host *host) +{ + unsigned long flags; + size_t blksize, len, chunk; + u32 scratch; + u8 *buf; + + blksize = host->data->blksz; + chunk = 0; + chunk = 0; + scratch = 0; + + local_irq_save(flags); + + while (blksize) { + if (!sg_miter_next(&host->sg_miter)) + BUG(); + + len = min(host->sg_miter.length, blksize); + + blksize -= len; + host->sg_miter.consumed = len; + + buf = host->sg_miter.addr; + + while (len) { + scratch |= (u32)*buf << (chunk * 8); + + buf++; + chunk++; + len--; + + if ((chunk == 4) || ((len == 0) && (blksize == 0))) { + mmc_raw_writel(host, scratch, SDHCI_BUFFER); + chunk = 0; + scratch = 0; + } + } + } + + sg_miter_stop(&host->sg_miter); + + local_irq_restore(flags); +} + + +static void bcm2835_mmc_transfer_pio(struct bcm2835_host *host) +{ + u32 mask; + + BUG_ON(!host->data); + + if (host->blocks == 0) + return; + + if (host->data->flags & MMC_DATA_READ) + mask = SDHCI_DATA_AVAILABLE; + else + mask = SDHCI_SPACE_AVAILABLE; + + while (bcm2835_mmc_readl(host, SDHCI_PRESENT_STATE) & mask) { + + if (host->data->flags & MMC_DATA_READ) + bcm2835_bcm2835_mmc_read_block_pio(host); + else + bcm2835_bcm2835_mmc_write_block_pio(host); + + host->blocks--; + + /* QUIRK used in sdhci.c removes the 'if' */ + /* but it seems this is unnecessary */ + if (host->blocks == 0) + break; + + + } +} + + +static void bcm2835_mmc_transfer_dma(struct bcm2835_host *host) +{ + u32 len, dir_data, dir_slave; + struct dma_async_tx_descriptor *desc = NULL; + struct dma_chan *dma_chan; + + + WARN_ON(!host->data); + + if (!host->data) + return; + + if (host->blocks == 0) + return; + + if (host->data->flags & MMC_DATA_READ) { + dma_chan = host->dma_chan_rx; + dir_data = DMA_FROM_DEVICE; + dir_slave = DMA_DEV_TO_MEM; + } else { + dma_chan = host->dma_chan_tx; + dir_data = DMA_TO_DEVICE; + dir_slave = DMA_MEM_TO_DEV; + } + + BUG_ON(!dma_chan->device); + BUG_ON(!dma_chan->device->dev); + BUG_ON(!host->data->sg); + + len = dma_map_sg(dma_chan->device->dev, host->data->sg, + host->data->sg_len, dir_data); + if (len > 0) { + desc = dmaengine_prep_slave_sg(dma_chan, host->data->sg, + len, dir_slave, + DMA_PREP_INTERRUPT | DMA_CTRL_ACK); + } else { + dev_err(mmc_dev(host->mmc), "dma_map_sg returned zero length\n"); + } + if (desc) { + bcm2835_mmc_unsignal_irqs(host, SDHCI_INT_DATA_AVAIL | + SDHCI_INT_SPACE_AVAIL); + host->tx_desc = desc; + desc->callback = bcm2835_mmc_dma_complete; + desc->callback_param = host; + dmaengine_submit(desc); + dma_async_issue_pending(dma_chan); + } + +} + + + +static void bcm2835_mmc_set_transfer_irqs(struct bcm2835_host *host) +{ + u32 pio_irqs = SDHCI_INT_DATA_AVAIL | SDHCI_INT_SPACE_AVAIL; + u32 dma_irqs = SDHCI_INT_DMA_END | SDHCI_INT_ADMA_ERROR; + + if (host->use_dma) + host->ier = (host->ier & ~pio_irqs) | dma_irqs; + else + host->ier = (host->ier & ~dma_irqs) | pio_irqs; + + bcm2835_mmc_writel(host, host->ier, SDHCI_INT_ENABLE); + bcm2835_mmc_writel(host, host->ier, SDHCI_SIGNAL_ENABLE); +} + + +static void bcm2835_mmc_prepare_data(struct bcm2835_host *host, struct mmc_command *cmd) +{ + u8 count; + struct mmc_data *data = cmd->data; + + WARN_ON(host->data); + + if (data || (cmd->flags & MMC_RSP_BUSY)) { + count = TIMEOUT_VAL; + bcm2835_mmc_writeb(host, count, SDHCI_TIMEOUT_CONTROL); + } + + if (!data) + return; + + /* Sanity checks */ + BUG_ON(data->blksz * data->blocks > 524288); + BUG_ON(data->blksz > host->mmc->max_blk_size); + BUG_ON(data->blocks > 65535); + + host->data = data; + host->data_early = 0; + host->data->bytes_xfered = 0; + + + if (!(host->flags & SDHCI_REQ_USE_DMA)) { + int flags; + + flags = SG_MITER_ATOMIC; + if (host->data->flags & MMC_DATA_READ) + flags |= SG_MITER_TO_SG; + else + flags |= SG_MITER_FROM_SG; + sg_miter_start(&host->sg_miter, data->sg, data->sg_len, flags); + host->blocks = data->blocks; + } + + host->use_dma = host->have_dma && data->blocks > PIO_DMA_BARRIER; + + bcm2835_mmc_set_transfer_irqs(host); + + /* Set the DMA boundary value and block size */ + bcm2835_mmc_writew(host, SDHCI_MAKE_BLKSZ(SDHCI_DEFAULT_BOUNDARY_ARG, + data->blksz), SDHCI_BLOCK_SIZE); + bcm2835_mmc_writew(host, data->blocks, SDHCI_BLOCK_COUNT); + + BUG_ON(!host->data); +} + +static void bcm2835_mmc_set_transfer_mode(struct bcm2835_host *host, + struct mmc_command *cmd) +{ + u16 mode; + struct mmc_data *data = cmd->data; + + if (data == NULL) { + /* clear Auto CMD settings for no data CMDs */ + mode = bcm2835_mmc_readw(host, SDHCI_TRANSFER_MODE); + bcm2835_mmc_writew(host, mode & ~(SDHCI_TRNS_AUTO_CMD12 | + SDHCI_TRNS_AUTO_CMD23), SDHCI_TRANSFER_MODE); + return; + } + + WARN_ON(!host->data); + + mode = SDHCI_TRNS_BLK_CNT_EN; + + if ((mmc_op_multi(cmd->opcode) || data->blocks > 1)) { + mode |= SDHCI_TRNS_MULTI; + + /* + * If we are sending CMD23, CMD12 never gets sent + * on successful completion (so no Auto-CMD12). + */ + if (!host->mrq->sbc && (host->flags & SDHCI_AUTO_CMD12)) + mode |= SDHCI_TRNS_AUTO_CMD12; + else if (host->mrq->sbc && (host->flags & SDHCI_AUTO_CMD23)) { + mode |= SDHCI_TRNS_AUTO_CMD23; + bcm2835_mmc_writel(host, host->mrq->sbc->arg, SDHCI_ARGUMENT2); + } + } + + if (data->flags & MMC_DATA_READ) + mode |= SDHCI_TRNS_READ; + if (host->flags & SDHCI_REQ_USE_DMA) + mode |= SDHCI_TRNS_DMA; + + bcm2835_mmc_writew(host, mode, SDHCI_TRANSFER_MODE); +} + +void bcm2835_mmc_send_command(struct bcm2835_host *host, struct mmc_command *cmd) +{ + int flags; + u32 mask; + unsigned long timeout; + + WARN_ON(host->cmd); + + /* Wait max 10 ms */ + timeout = 1000; + + mask = SDHCI_CMD_INHIBIT; + if ((cmd->data != NULL) || (cmd->flags & MMC_RSP_BUSY)) + mask |= SDHCI_DATA_INHIBIT; + + /* We shouldn't wait for data inihibit for stop commands, even + though they might use busy signaling */ + if (host->mrq->data && (cmd == host->mrq->data->stop)) + mask &= ~SDHCI_DATA_INHIBIT; + + while (bcm2835_mmc_readl(host, SDHCI_PRESENT_STATE) & mask) { + if (timeout == 0) { + pr_err("%s: Controller never released inhibit bit(s).\n", + mmc_hostname(host->mmc)); + bcm2835_mmc_dumpregs(host); + cmd->error = -EIO; + tasklet_schedule(&host->finish_tasklet); + return; + } + timeout--; + udelay(10); + } + + if ((1000-timeout)/100 > 1 && (1000-timeout)/100 > host->max_delay) { + host->max_delay = (1000-timeout)/100; + pr_warning("Warning: MMC controller hung for %d ms\n", host->max_delay); + } + + timeout = jiffies; +#ifdef CONFIG_OF + if (!cmd->data && cmd->busy_timeout > 9000) + timeout += DIV_ROUND_UP(cmd->busy_timeout, 1000) * HZ + HZ; + else +#endif + timeout += 10 * HZ; + mod_timer(&host->timer, timeout); + + host->cmd = cmd; + + bcm2835_mmc_prepare_data(host, cmd); + + bcm2835_mmc_writel(host, cmd->arg, SDHCI_ARGUMENT); + + bcm2835_mmc_set_transfer_mode(host, cmd); + + if ((cmd->flags & MMC_RSP_136) && (cmd->flags & MMC_RSP_BUSY)) { + pr_err("%s: Unsupported response type!\n", + mmc_hostname(host->mmc)); + cmd->error = -EINVAL; + tasklet_schedule(&host->finish_tasklet); + return; + } + + if (!(cmd->flags & MMC_RSP_PRESENT)) + flags = SDHCI_CMD_RESP_NONE; + else if (cmd->flags & MMC_RSP_136) + flags = SDHCI_CMD_RESP_LONG; + else if (cmd->flags & MMC_RSP_BUSY) + flags = SDHCI_CMD_RESP_SHORT_BUSY; + else + flags = SDHCI_CMD_RESP_SHORT; + + if (cmd->flags & MMC_RSP_CRC) + flags |= SDHCI_CMD_CRC; + if (cmd->flags & MMC_RSP_OPCODE) + flags |= SDHCI_CMD_INDEX; + + if (cmd->data) + flags |= SDHCI_CMD_DATA; + + bcm2835_mmc_writew(host, SDHCI_MAKE_CMD(cmd->opcode, flags), SDHCI_COMMAND); +} + + +static void bcm2835_mmc_finish_data(struct bcm2835_host *host) +{ + struct mmc_data *data; + + BUG_ON(!host->data); + + data = host->data; + host->data = NULL; + + if (data->error) + data->bytes_xfered = 0; + else + data->bytes_xfered = data->blksz * data->blocks; + + /* + * Need to send CMD12 if - + * a) open-ended multiblock transfer (no CMD23) + * b) error in multiblock transfer + */ + if (data->stop && + (data->error || + !host->mrq->sbc)) { + + /* + * The controller needs a reset of internal state machines + * upon error conditions. + */ + if (data->error) { + bcm2835_mmc_reset(host, SDHCI_RESET_CMD); + bcm2835_mmc_reset(host, SDHCI_RESET_DATA); + } + + bcm2835_mmc_send_command(host, data->stop); + } else + tasklet_schedule(&host->finish_tasklet); +} + +static void bcm2835_mmc_finish_command(struct bcm2835_host *host) +{ + int i; + + BUG_ON(host->cmd == NULL); + + if (host->cmd->flags & MMC_RSP_PRESENT) { + if (host->cmd->flags & MMC_RSP_136) { + /* CRC is stripped so we need to do some shifting. */ + for (i = 0; i < 4; i++) { + host->cmd->resp[i] = bcm2835_mmc_readl(host, + SDHCI_RESPONSE + (3-i)*4) << 8; + if (i != 3) + host->cmd->resp[i] |= + bcm2835_mmc_readb(host, + SDHCI_RESPONSE + (3-i)*4-1); + } + } else { + host->cmd->resp[0] = bcm2835_mmc_readl(host, SDHCI_RESPONSE); + } + } + + host->cmd->error = 0; + + /* Finished CMD23, now send actual command. */ + if (host->cmd == host->mrq->sbc) { + host->cmd = NULL; + bcm2835_mmc_send_command(host, host->mrq->cmd); + + if (host->mrq->cmd->data && host->use_dma) { + /* DMA transfer starts now, PIO starts after interrupt */ + bcm2835_mmc_transfer_dma(host); + } + } else { + + /* Processed actual command. */ + if (host->data && host->data_early) + bcm2835_mmc_finish_data(host); + + if (!host->cmd->data) + tasklet_schedule(&host->finish_tasklet); + + host->cmd = NULL; + } +} + + +static void bcm2835_mmc_timeout_timer(unsigned long data) +{ + struct bcm2835_host *host; + unsigned long flags; + + host = (struct bcm2835_host *)data; + + spin_lock_irqsave(&host->lock, flags); + + if (host->mrq) { + pr_err("%s: Timeout waiting for hardware interrupt.\n", + mmc_hostname(host->mmc)); + bcm2835_mmc_dumpregs(host); + + if (host->data) { + host->data->error = -ETIMEDOUT; + bcm2835_mmc_finish_data(host); + } else { + if (host->cmd) + host->cmd->error = -ETIMEDOUT; + else + host->mrq->cmd->error = -ETIMEDOUT; + + tasklet_schedule(&host->finish_tasklet); + } + } + + mmiowb(); + spin_unlock_irqrestore(&host->lock, flags); +} + + +static void bcm2835_mmc_enable_sdio_irq_nolock(struct bcm2835_host *host, int enable) +{ + if (!(host->flags & SDHCI_DEVICE_DEAD)) { + if (enable) + host->ier |= SDHCI_INT_CARD_INT; + else + host->ier &= ~SDHCI_INT_CARD_INT; + + bcm2835_mmc_writel(host, host->ier, SDHCI_INT_ENABLE); + bcm2835_mmc_writel(host, host->ier, SDHCI_SIGNAL_ENABLE); + mmiowb(); + } +} + +static void bcm2835_mmc_enable_sdio_irq(struct mmc_host *mmc, int enable) +{ + struct bcm2835_host *host = mmc_priv(mmc); + unsigned long flags; + + spin_lock_irqsave(&host->lock, flags); + if (enable) + host->flags |= SDHCI_SDIO_IRQ_ENABLED; + else + host->flags &= ~SDHCI_SDIO_IRQ_ENABLED; + + bcm2835_mmc_enable_sdio_irq_nolock(host, enable); + spin_unlock_irqrestore(&host->lock, flags); +} + +static void bcm2835_mmc_cmd_irq(struct bcm2835_host *host, u32 intmask) +{ + + BUG_ON(intmask == 0); + + if (!host->cmd) { + pr_err("%s: Got command interrupt 0x%08x even " + "though no command operation was in progress.\n", + mmc_hostname(host->mmc), (unsigned)intmask); + bcm2835_mmc_dumpregs(host); + return; + } + + if (intmask & SDHCI_INT_TIMEOUT) + host->cmd->error = -ETIMEDOUT; + else if (intmask & (SDHCI_INT_CRC | SDHCI_INT_END_BIT | + SDHCI_INT_INDEX)) { + host->cmd->error = -EILSEQ; + } + + if (host->cmd->error) { + tasklet_schedule(&host->finish_tasklet); + return; + } + + if (intmask & SDHCI_INT_RESPONSE) + bcm2835_mmc_finish_command(host); + +} + +static void bcm2835_mmc_data_irq(struct bcm2835_host *host, u32 intmask) +{ + struct dma_chan *dma_chan; + u32 dir_data; + + BUG_ON(intmask == 0); + + if (!host->data) { + /* + * The "data complete" interrupt is also used to + * indicate that a busy state has ended. See comment + * above in sdhci_cmd_irq(). + */ + if (host->cmd && (host->cmd->flags & MMC_RSP_BUSY)) { + if (intmask & SDHCI_INT_DATA_END) { + bcm2835_mmc_finish_command(host); + return; + } + } + + pr_debug("%s: Got data interrupt 0x%08x even " + "though no data operation was in progress.\n", + mmc_hostname(host->mmc), (unsigned)intmask); + bcm2835_mmc_dumpregs(host); + + return; + } + + if (intmask & SDHCI_INT_DATA_TIMEOUT) + host->data->error = -ETIMEDOUT; + else if (intmask & SDHCI_INT_DATA_END_BIT) + host->data->error = -EILSEQ; + else if ((intmask & SDHCI_INT_DATA_CRC) && + SDHCI_GET_CMD(bcm2835_mmc_readw(host, SDHCI_COMMAND)) + != MMC_BUS_TEST_R) + host->data->error = -EILSEQ; + + if (host->use_dma) { + if (host->data->flags & MMC_DATA_WRITE) { + /* IRQ handled here */ + + dma_chan = host->dma_chan_tx; + dir_data = DMA_TO_DEVICE; + dma_unmap_sg(dma_chan->device->dev, + host->data->sg, host->data->sg_len, + dir_data); + + bcm2835_mmc_finish_data(host); + } + + } else { + if (host->data->error) + bcm2835_mmc_finish_data(host); + else { + if (intmask & (SDHCI_INT_DATA_AVAIL | SDHCI_INT_SPACE_AVAIL)) + bcm2835_mmc_transfer_pio(host); + + if (intmask & SDHCI_INT_DATA_END) { + if (host->cmd) { + /* + * Data managed to finish before the + * command completed. Make sure we do + * things in the proper order. + */ + host->data_early = 1; + } else { + bcm2835_mmc_finish_data(host); + } + } + } + } +} + + +static irqreturn_t bcm2835_mmc_irq(int irq, void *dev_id) +{ + irqreturn_t result = IRQ_NONE; + struct bcm2835_host *host = dev_id; + u32 intmask, mask, unexpected = 0; + int max_loops = 16; +#ifndef CONFIG_OF + int cardint = 0; +#endif + + spin_lock(&host->lock); + + intmask = bcm2835_mmc_readl(host, SDHCI_INT_STATUS); + + if (!intmask || intmask == 0xffffffff) { + result = IRQ_NONE; + goto out; + } + + do { + /* Clear selected interrupts. */ + mask = intmask & (SDHCI_INT_CMD_MASK | SDHCI_INT_DATA_MASK | + SDHCI_INT_BUS_POWER); + bcm2835_mmc_writel(host, mask, SDHCI_INT_STATUS); + + + if (intmask & SDHCI_INT_CMD_MASK) + bcm2835_mmc_cmd_irq(host, intmask & SDHCI_INT_CMD_MASK); + + if (intmask & SDHCI_INT_DATA_MASK) + bcm2835_mmc_data_irq(host, intmask & SDHCI_INT_DATA_MASK); + + if (intmask & SDHCI_INT_BUS_POWER) + pr_err("%s: Card is consuming too much power!\n", + mmc_hostname(host->mmc)); + + if (intmask & SDHCI_INT_CARD_INT) { +#ifndef CONFIG_OF + cardint = 1; +#else + bcm2835_mmc_enable_sdio_irq_nolock(host, false); + host->thread_isr |= SDHCI_INT_CARD_INT; + result = IRQ_WAKE_THREAD; +#endif + } + + intmask &= ~(SDHCI_INT_CARD_INSERT | SDHCI_INT_CARD_REMOVE | + SDHCI_INT_CMD_MASK | SDHCI_INT_DATA_MASK | + SDHCI_INT_ERROR | SDHCI_INT_BUS_POWER | + SDHCI_INT_CARD_INT); + + if (intmask) { + unexpected |= intmask; + bcm2835_mmc_writel(host, intmask, SDHCI_INT_STATUS); + } + + if (result == IRQ_NONE) + result = IRQ_HANDLED; + + intmask = bcm2835_mmc_readl(host, SDHCI_INT_STATUS); + } while (intmask && --max_loops); +out: + spin_unlock(&host->lock); + + if (unexpected) { + pr_err("%s: Unexpected interrupt 0x%08x.\n", + mmc_hostname(host->mmc), unexpected); + bcm2835_mmc_dumpregs(host); + } + +#ifndef CONFIG_OF + if (cardint) + mmc_signal_sdio_irq(host->mmc); +#endif + + return result; +} + +#ifdef CONFIG_OF +static irqreturn_t bcm2835_mmc_thread_irq(int irq, void *dev_id) +{ + struct bcm2835_host *host = dev_id; + unsigned long flags; + u32 isr; + + spin_lock_irqsave(&host->lock, flags); + isr = host->thread_isr; + host->thread_isr = 0; + spin_unlock_irqrestore(&host->lock, flags); + + if (isr & SDHCI_INT_CARD_INT) { + sdio_run_irqs(host->mmc); + + spin_lock_irqsave(&host->lock, flags); + if (host->flags & SDHCI_SDIO_IRQ_ENABLED) + bcm2835_mmc_enable_sdio_irq_nolock(host, true); + spin_unlock_irqrestore(&host->lock, flags); + } + + return isr ? IRQ_HANDLED : IRQ_NONE; +} +#endif + + + +void bcm2835_mmc_set_clock(struct bcm2835_host *host, unsigned int clock) +{ + int div = 0; /* Initialized for compiler warning */ + int real_div = div, clk_mul = 1; + u16 clk = 0; + unsigned long timeout; + + + host->mmc->actual_clock = 0; + + bcm2835_mmc_writew(host, 0, SDHCI_CLOCK_CONTROL); + + if (clock == 0) + return; + + /* Version 3.00 divisors must be a multiple of 2. */ + if (host->max_clk <= clock) + div = 1; + else { + for (div = 2; div < SDHCI_MAX_DIV_SPEC_300; + div += 2) { + if ((host->max_clk / div) <= clock) + break; + } + } + + real_div = div; + div >>= 1; + + if (real_div) + host->mmc->actual_clock = (host->max_clk * clk_mul) / real_div; + + clk |= (div & SDHCI_DIV_MASK) << SDHCI_DIVIDER_SHIFT; + clk |= ((div & SDHCI_DIV_HI_MASK) >> SDHCI_DIV_MASK_LEN) + << SDHCI_DIVIDER_HI_SHIFT; + clk |= SDHCI_CLOCK_INT_EN; + bcm2835_mmc_writew(host, clk, SDHCI_CLOCK_CONTROL); + + /* Wait max 20 ms */ + timeout = 20; + while (!((clk = bcm2835_mmc_readw(host, SDHCI_CLOCK_CONTROL)) + & SDHCI_CLOCK_INT_STABLE)) { + if (timeout == 0) { + pr_err("%s: Internal clock never " + "stabilised.\n", mmc_hostname(host->mmc)); + bcm2835_mmc_dumpregs(host); + return; + } + timeout--; + mdelay(1); + } + + if (20-timeout > 10 && 20-timeout > host->max_delay) { + host->max_delay = 20-timeout; + pr_warning("Warning: MMC controller hung for %d ms\n", host->max_delay); + } + + clk |= SDHCI_CLOCK_CARD_EN; + bcm2835_mmc_writew(host, clk, SDHCI_CLOCK_CONTROL); +} + +static void bcm2835_mmc_request(struct mmc_host *mmc, struct mmc_request *mrq) +{ + struct bcm2835_host *host; + unsigned long flags; + + host = mmc_priv(mmc); + + spin_lock_irqsave(&host->lock, flags); + + WARN_ON(host->mrq != NULL); + + host->mrq = mrq; + + if (mrq->sbc && !(host->flags & SDHCI_AUTO_CMD23)) + bcm2835_mmc_send_command(host, mrq->sbc); + else + bcm2835_mmc_send_command(host, mrq->cmd); + + mmiowb(); + spin_unlock_irqrestore(&host->lock, flags); + + if (!(mrq->sbc && !(host->flags & SDHCI_AUTO_CMD23)) && mrq->cmd->data && host->use_dma) { + /* DMA transfer starts now, PIO starts after interrupt */ + bcm2835_mmc_transfer_dma(host); + } +} + + +static void bcm2835_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) +{ + + struct bcm2835_host *host = mmc_priv(mmc); + unsigned long flags; + u8 ctrl; + u16 clk, ctrl_2; + + + spin_lock_irqsave(&host->lock, flags); + + if (!ios->clock || ios->clock != host->clock) { + bcm2835_mmc_set_clock(host, ios->clock); + host->clock = ios->clock; + } + + if (host->pwr != SDHCI_POWER_330) { + host->pwr = SDHCI_POWER_330; + bcm2835_mmc_writeb(host, SDHCI_POWER_330 | SDHCI_POWER_ON, SDHCI_POWER_CONTROL); + } + + ctrl = bcm2835_mmc_readb(host, SDHCI_HOST_CONTROL); + + /* set bus width */ + ctrl &= ~SDHCI_CTRL_8BITBUS; + if (ios->bus_width == MMC_BUS_WIDTH_4) + ctrl |= SDHCI_CTRL_4BITBUS; + else + ctrl &= ~SDHCI_CTRL_4BITBUS; + + ctrl &= ~SDHCI_CTRL_HISPD; /* NO_HISPD_BIT */ + + + bcm2835_mmc_writeb(host, ctrl, SDHCI_HOST_CONTROL); + /* + * We only need to set Driver Strength if the + * preset value enable is not set. + */ + ctrl_2 = bcm2835_mmc_readw(host, SDHCI_HOST_CONTROL2); + ctrl_2 &= ~SDHCI_CTRL_DRV_TYPE_MASK; + if (ios->drv_type == MMC_SET_DRIVER_TYPE_A) + ctrl_2 |= SDHCI_CTRL_DRV_TYPE_A; + else if (ios->drv_type == MMC_SET_DRIVER_TYPE_C) + ctrl_2 |= SDHCI_CTRL_DRV_TYPE_C; + + bcm2835_mmc_writew(host, ctrl_2, SDHCI_HOST_CONTROL2); + + /* Reset SD Clock Enable */ + clk = bcm2835_mmc_readw(host, SDHCI_CLOCK_CONTROL); + clk &= ~SDHCI_CLOCK_CARD_EN; + bcm2835_mmc_writew(host, clk, SDHCI_CLOCK_CONTROL); + + /* Re-enable SD Clock */ + bcm2835_mmc_set_clock(host, host->clock); + bcm2835_mmc_writeb(host, ctrl, SDHCI_HOST_CONTROL); + + mmiowb(); + + spin_unlock_irqrestore(&host->lock, flags); +} + + +static struct mmc_host_ops bcm2835_ops = { + .request = bcm2835_mmc_request, + .set_ios = bcm2835_mmc_set_ios, + .enable_sdio_irq = bcm2835_mmc_enable_sdio_irq, +}; + + +static void bcm2835_mmc_tasklet_finish(unsigned long param) +{ + struct bcm2835_host *host; + unsigned long flags; + struct mmc_request *mrq; + + host = (struct bcm2835_host *)param; + + spin_lock_irqsave(&host->lock, flags); + + /* + * If this tasklet gets rescheduled while running, it will + * be run again afterwards but without any active request. + */ + if (!host->mrq) { + spin_unlock_irqrestore(&host->lock, flags); + return; + } + + del_timer(&host->timer); + + mrq = host->mrq; + + /* + * The controller needs a reset of internal state machines + * upon error conditions. + */ + if (!(host->flags & SDHCI_DEVICE_DEAD) && + ((mrq->cmd && mrq->cmd->error) || + (mrq->data && (mrq->data->error || + (mrq->data->stop && mrq->data->stop->error))))) { + + bcm2835_mmc_reset(host, SDHCI_RESET_CMD); + bcm2835_mmc_reset(host, SDHCI_RESET_DATA); + } + + host->mrq = NULL; + host->cmd = NULL; + host->data = NULL; + + mmiowb(); + + spin_unlock_irqrestore(&host->lock, flags); + mmc_request_done(host->mmc, mrq); +} + + + +int bcm2835_mmc_add_host(struct bcm2835_host *host) +{ + struct mmc_host *mmc; +#ifndef FORCE_PIO + struct dma_slave_config cfg; +#endif + int ret; + + mmc = host->mmc; + + bcm2835_mmc_reset(host, SDHCI_RESET_ALL); + + host->clk_mul = 0; + + mmc->ops = &bcm2835_ops; + mmc->f_max = host->max_clk; + mmc->f_max = host->max_clk; + mmc->f_min = host->max_clk / SDHCI_MAX_DIV_SPEC_300; + + /* SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK */ + host->timeout_clk = mmc->f_max / 1000; +#ifdef CONFIG_OF + mmc->max_busy_timeout = (1 << 27) / host->timeout_clk; +#endif + /* host controller capabilities */ + mmc->caps = MMC_CAP_CMD23 | MMC_CAP_ERASE | MMC_CAP_NEEDS_POLL | MMC_CAP_SDIO_IRQ | + MMC_CAP_SD_HIGHSPEED | MMC_CAP_MMC_HIGHSPEED | MMC_CAP_4_BIT_DATA; + + host->flags = SDHCI_AUTO_CMD23; + + spin_lock_init(&host->lock); + + +#ifdef FORCE_PIO + pr_info("Forcing PIO mode\n"); + host->have_dma = false; +#else + if (!host->dma_chan_tx || !host->dma_chan_rx || + IS_ERR(host->dma_chan_tx) || IS_ERR(host->dma_chan_rx)) { + pr_err("%s: Unable to initialise DMA channels. Falling back to PIO\n", DRIVER_NAME); + host->have_dma = false; + } else { + pr_info("DMA channels allocated for the MMC driver"); + host->have_dma = true; + + cfg.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; + cfg.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; + cfg.slave_id = 11; /* DREQ channel */ + + cfg.direction = DMA_MEM_TO_DEV; + cfg.src_addr = 0; + cfg.dst_addr = host->phys_addr + SDHCI_BUFFER; + ret = dmaengine_slave_config(host->dma_chan_tx, &cfg); + + cfg.direction = DMA_DEV_TO_MEM; + cfg.src_addr = host->phys_addr + SDHCI_BUFFER; + cfg.dst_addr = 0; + ret = dmaengine_slave_config(host->dma_chan_rx, &cfg); + } +#endif + + + mmc->max_segs = 128; + mmc->max_req_size = 524288; + mmc->max_seg_size = mmc->max_req_size; + mmc->max_blk_size = 512; + mmc->max_blk_count = 65535; + + /* report supported voltage ranges */ + mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34; + + tasklet_init(&host->finish_tasklet, + bcm2835_mmc_tasklet_finish, (unsigned long)host); + + setup_timer(&host->timer, bcm2835_mmc_timeout_timer, (unsigned long)host); + init_waitqueue_head(&host->buf_ready_int); + + bcm2835_mmc_init(host, 0); +#ifndef CONFIG_OF + ret = request_irq(host->irq, bcm2835_mmc_irq, 0 /*IRQF_SHARED*/, + mmc_hostname(mmc), host); +#else + ret = request_threaded_irq(host->irq, bcm2835_mmc_irq, bcm2835_mmc_thread_irq, + IRQF_SHARED, mmc_hostname(mmc), host); +#endif + if (ret) { + pr_err("%s: Failed to request IRQ %d: %d\n", + mmc_hostname(mmc), host->irq, ret); + goto untasklet; + } + + mmiowb(); + mmc_add_host(mmc); + + pr_info("Load BCM2835 MMC driver\n"); + + return 0; + +untasklet: + tasklet_kill(&host->finish_tasklet); + + return ret; +} + +static int bcm2835_mmc_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; +#ifdef CONFIG_OF + struct device_node *node = dev->of_node; + struct clk *clk; +#endif + struct resource *iomem; + struct bcm2835_host *host = NULL; + + int ret; + struct mmc_host *mmc; +#if !defined(CONFIG_OF) && !defined(FORCE_PIO) + dma_cap_mask_t mask; +#endif + + iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!iomem) { + ret = -ENOMEM; + goto err; + } + + if (resource_size(iomem) < 0x100) + dev_err(&pdev->dev, "Invalid iomem size!\n"); + + mmc = mmc_alloc_host(sizeof(struct bcm2835_host), dev); + host = mmc_priv(mmc); + host->mmc = mmc; + + + if (IS_ERR(host)) { + ret = PTR_ERR(host); + goto err; + } + + host->phys_addr = iomem->start + BCM2835_VCMMU_SHIFT; + +#ifndef CONFIG_OF +#ifndef FORCE_PIO + dma_cap_zero(mask); + /* we don't care about the channel, any would work */ + dma_cap_set(DMA_SLAVE, mask); + + host->dma_chan_tx = dma_request_channel(mask, NULL, NULL); + host->dma_chan_rx = dma_request_channel(mask, NULL, NULL); +#endif + host->max_clk = BCM2835_CLOCK_FREQ; + +#else +#ifndef FORCE_PIO + host->dma_chan_tx = of_dma_request_slave_channel(node, "tx"); + host->dma_chan_rx = of_dma_request_slave_channel(node, "rx"); +#endif + clk = of_clk_get(node, 0); + if (IS_ERR(clk)) { + dev_err(dev, "get CLOCK failed\n"); + ret = PTR_ERR(clk); + goto out; + } + host->max_clk = (clk_get_rate(clk)); +#endif + host->irq = platform_get_irq(pdev, 0); + + if (!request_mem_region(iomem->start, resource_size(iomem), + mmc_hostname(host->mmc))) { + dev_err(&pdev->dev, "cannot request region\n"); + ret = -EBUSY; + goto err_request; + } + + host->ioaddr = ioremap(iomem->start, resource_size(iomem)); + if (!host->ioaddr) { + dev_err(&pdev->dev, "failed to remap registers\n"); + ret = -ENOMEM; + goto err_remap; + } + + platform_set_drvdata(pdev, host); + + + if (host->irq <= 0) { + dev_err(dev, "get IRQ failed\n"); + ret = -EINVAL; + goto out; + } + + +#ifndef CONFIG_OF + mmc->caps |= MMC_CAP_4_BIT_DATA; +#else + mmc_of_parse(mmc); +#endif + host->timeout = msecs_to_jiffies(1000); + spin_lock_init(&host->lock); + mmc->ops = &bcm2835_ops; + return bcm2835_mmc_add_host(host); + + +err_remap: + release_mem_region(iomem->start, resource_size(iomem)); +err_request: + mmc_free_host(host->mmc); +err: + dev_err(&pdev->dev, "%s failed %d\n", __func__, ret); + return ret; +out: + if (mmc) + mmc_free_host(mmc); + return ret; +} + +static int bcm2835_mmc_remove(struct platform_device *pdev) +{ + struct bcm2835_host *host = platform_get_drvdata(pdev); + struct resource *iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0); + unsigned long flags; + int dead; + u32 scratch; + + dead = 0; + scratch = bcm2835_mmc_readl(host, SDHCI_INT_STATUS); + if (scratch == (u32)-1) + dead = 1; + + + if (dead) { + spin_lock_irqsave(&host->lock, flags); + + host->flags |= SDHCI_DEVICE_DEAD; + + if (host->mrq) { + pr_err("%s: Controller removed during " + " transfer!\n", mmc_hostname(host->mmc)); + + host->mrq->cmd->error = -ENOMEDIUM; + tasklet_schedule(&host->finish_tasklet); + } + + spin_unlock_irqrestore(&host->lock, flags); + } + + mmc_remove_host(host->mmc); + + if (!dead) + bcm2835_mmc_reset(host, SDHCI_RESET_ALL); + + free_irq(host->irq, host); + + del_timer_sync(&host->timer); + + tasklet_kill(&host->finish_tasklet); + + iounmap(host->ioaddr); + release_mem_region(iomem->start, resource_size(iomem)); + mmc_free_host(host->mmc); + platform_set_drvdata(pdev, NULL); + + return 0; +} + + +static const struct of_device_id bcm2835_mmc_match[] = { + { .compatible = "brcm,bcm2835-mmc" }, + { } +}; +MODULE_DEVICE_TABLE(of, bcm2835_mmc_match); + + + +static struct platform_driver bcm2835_mmc_driver = { + .probe = bcm2835_mmc_probe, + .remove = bcm2835_mmc_remove, + .driver = { + .name = DRIVER_NAME, + .owner = THIS_MODULE, + .of_match_table = bcm2835_mmc_match, + }, +}; +module_platform_driver(bcm2835_mmc_driver); + +MODULE_ALIAS("platform:mmc-bcm2835"); +MODULE_DESCRIPTION("BCM2835 SDHCI driver"); +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Gellert Weisz"); -- 1.8.3.2