From 6abc4ca5a28070945e0d68cb4160b309bfbf4b8b Mon Sep 17 00:00:00 2001 From: Christian Lamparter Date: Sat, 18 Sep 2021 19:29:30 +0200 Subject: [PATCH] ARM: BCM53016: Specify switch ports for Meraki MR32 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit the switch identifies itself as a BCM53012 (rev 5)... This patch has been tested & verified on OpenWrt's snapshot with Linux 5.10 (didn't test any older kernels). The MR32 is able to "talk to the network" as before with OpenWrt's SWITCHDEV b53 driver. | b53-srab-switch 18007000.ethernet-switch: found switch: BCM53012, rev 5 | libphy: dsa slave smi: probed | b53-srab-switch 18007000.ethernet-switch poe (uninitialized): | PHY [dsa-0.0:00] driver [Generic PHY] (irq=POLL) | b53-srab-switch 18007000.ethernet-switch: Using legacy PHYLIB callbacks. | Please migrate to PHYLINK! | DSA: tree 0 setup Reported-by: Rafał Miłecki Signed-off-by: Christian Lamparter Signed-off-by: Florian Fainelli --- arch/arm/boot/dts/bcm53016-meraki-mr32.dts | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) --- a/arch/arm/boot/dts/bcm53016-meraki-mr32.dts +++ b/arch/arm/boot/dts/bcm53016-meraki-mr32.dts @@ -195,3 +195,25 @@ }; }; }; + +&srab { + status = "okay"; + + ports { + port@0 { + reg = <0>; + label = "poe"; + }; + + port@5 { + reg = <5>; + label = "cpu"; + ethernet = <&gmac0>; + + fixed-link { + speed = <1000>; + duplex-full; + }; + }; + }; +};