From beff77b93452cd2057c859694709dd34a181488f Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ar=C4=B1n=C3=A7=20=C3=9CNAL?= Date: Tue, 21 Sep 2021 20:19:01 +0800 Subject: [PATCH] ARM: dts: BCM5301X: Add DT for Asus RT-AC88U MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Hardware Info ------------- Processor - Broadcom BCM4709C0KFEBG dual-core @ 1.4 GHz Switch - BCM53012 in BCM4709C0KFEBG & external RTL8365MB DDR3 RAM - 512 MB Flash - 128 MB (ESMT F59L1G81LA-25T) 2.4GHz - BCM4366 4×4 2.4/5G single chip 802.11ac SoC 5GHz - BCM4366 4×4 2.4/5G single chip 802.11ac SoC Ports - 8 Ports, 1 WAN Ports Tested on OpenWrt on kernel 5.10 built with DSA driver. Signed-off-by: Arınç ÜNAL Signed-off-by: Florian Fainelli --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts | 200 +++++++++++++++++++ 2 files changed, 201 insertions(+) create mode 100644 arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -118,6 +118,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \ bcm4709-netgear-r7000.dtb \ bcm4709-netgear-r8000.dtb \ bcm4709-tplink-archer-c9-v1.dtb \ + bcm47094-asus-rt-ac88u.dtb \ bcm47094-dlink-dir-885l.dtb \ bcm47094-linksys-panamera.dtb \ bcm47094-luxul-abr-4500.dtb \ --- /dev/null +++ b/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts @@ -0,0 +1,200 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright (C) 2021 Arınç ÜNAL + */ + +/dts-v1/; + +#include "bcm47094.dtsi" +#include "bcm5301x-nand-cs0-bch8.dtsi" + +/ { + compatible = "asus,rt-ac88u", "brcm,bcm47094", "brcm,bcm4708"; + model = "Asus RT-AC88U"; + + chosen { + bootargs = "earlycon"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x00000000 0x08000000>, + <0x88000000 0x18000000>; + }; + + nvram@1c080000 { + compatible = "brcm,nvram"; + reg = <0x1c080000 0x00180000>; + }; + + leds { + compatible = "gpio-leds"; + + power { + label = "white:power"; + gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-on"; + }; + + wan-red { + label = "red:wan"; + gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>; + }; + + lan { + label = "white:lan"; + gpios = <&chipcommon 21 GPIO_ACTIVE_LOW>; + }; + + usb2 { + label = "white:usb2"; + gpios = <&chipcommon 16 GPIO_ACTIVE_LOW>; + trigger-sources = <&ehci_port2>; + linux,default-trigger = "usbport"; + }; + + usb3 { + label = "white:usb3"; + gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>; + trigger-sources = <&ehci_port1>, <&xhci_port1>; + linux,default-trigger = "usbport"; + }; + + wps { + label = "white:wps"; + gpios = <&chipcommon 19 GPIO_ACTIVE_LOW>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + wps { + label = "WPS"; + linux,code = ; + gpios = <&chipcommon 20 GPIO_ACTIVE_LOW>; + }; + + reset { + label = "Reset"; + linux,code = ; + gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; + }; + + wifi { + label = "Wi-Fi"; + linux,code = ; + gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>; + }; + + led { + label = "Backlight"; + linux,code = ; + gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&srab { + compatible = "brcm,bcm53012-srab", "brcm,bcm5301x-srab"; + status = "okay"; + dsa,member = <0 0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "lan4"; + }; + + port@1 { + reg = <1>; + label = "lan3"; + }; + + port@2 { + reg = <2>; + label = "lan2"; + }; + + port@3 { + reg = <3>; + label = "lan1"; + }; + + port@4 { + reg = <4>; + label = "wan"; + }; + + sw0_p5: port@5 { + reg = <5>; + label = "extsw"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + port@7 { + reg = <7>; + ethernet = <&gmac1>; + label = "cpu"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + port@8 { + reg = <8>; + ethernet = <&gmac2>; + label = "cpu"; + status = "disabled"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; +}; + +&usb2 { + vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>; +}; + +&usb3_phy { + status = "okay"; +}; + +&nandcs { + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "boot"; + reg = <0x00000000 0x00080000>; + read-only; + }; + + partition@80000 { + label = "nvram"; + reg = <0x00080000 0x00180000>; + }; + + partition@200000 { + label = "firmware"; + reg = <0x00200000 0x07e00000>; + compatible = "brcm,trx"; + }; + }; +};