From 205fc550ceb74f7e8bfcba5c5c7329aa1b34d4ee Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= Date: Fri, 29 Jul 2016 14:48:19 +0200 Subject: [PATCH V8] clk: bcm: Add driver for BCM53573 ILP clock MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This clock is present on BCM53573 devices (including BCM47189) that use Cortex-A7. ILP is a part of PMU (Power Management Unit) multi-function device so we use syscon (and regmap) for it. Signed-off-by: Rafał Miłecki --- V2: Rebase on top of clk-next Use ALP as parent clock Improve comments Switch from ioremap_nocache to ioremap Check of_clk_add_provide result for error V3: Drop #include Make ILP DT entry part of PMU Describe ILP as subdevice of PMU in Documentation V4: Use BCM53573 name as suggested by Jon and Ray. It seems "Northstar" (even if used in some resources) should be used in relation to Cortex-A9 devices only. V5: Rename remaining "ns" references to "bcm53573", sorry, I sent V4 too early. V6: Drop #include Use "int" as type where it matches usage Add cpu_relax() in the loop Add disable callback Use _hw_ functions for registering struct clk_hw (new API) Thanks a lot Stephen! V7: Use syscon and regmap (thanks Rob!) V8: Update Documentation (drop unused "reg", unit address) --- .../bindings/clock/brcm,bcm53573-ilp.txt | 36 +++++ drivers/clk/bcm/Makefile | 1 + drivers/clk/bcm/clk-bcm53573-ilp.c | 148 +++++++++++++++++++++ 3 files changed, 185 insertions(+) create mode 100644 Documentation/devicetree/bindings/clock/brcm,bcm53573-ilp.txt create mode 100644 drivers/clk/bcm/clk-bcm53573-ilp.c --- /dev/null +++ b/Documentation/devicetree/bindings/clock/brcm,bcm53573-ilp.txt @@ -0,0 +1,36 @@ +Broadcom BCM53573 ILP clock +=========================== + +This binding uses the common clock binding: + Documentation/devicetree/bindings/clock/clock-bindings.txt + +This binding is used for ILP clock (sometimes referred as "slow clock") +on Broadcom BCM53573 devices using Cortex-A7 CPU. + +ILP's rate has to be calculated on runtime and it depends on ALP clock +which has to be referenced. + +This clock is part of PMU (Power Management Unit), a Broadcom's device +handing power-related aspects. Its node must be sub-node of the PMU +device. + +Required properties: +- compatible: "brcm,bcm53573-ilp" +- clocks: has to reference an ALP clock +- #clock-cells: should be <0> +- clock-output-names: from common clock bindings, should contain clock + name + +Example: + +pmu@18012000 { + compatible = "simple-mfd", "syscon"; + reg = <0x18012000 0x00001000>; + + ilp { + compatible = "brcm,bcm53573-ilp"; + clocks = <&alp>; + #clock-cells = <0>; + clock-output-names = "ilp"; + }; +}; --- a/drivers/clk/bcm/Makefile +++ b/drivers/clk/bcm/Makefile @@ -8,3 +8,4 @@ obj-$(CONFIG_COMMON_CLK_IPROC) += clk-ns obj-$(CONFIG_ARCH_BCM_CYGNUS) += clk-cygnus.o obj-$(CONFIG_ARCH_BCM_NSP) += clk-nsp.o obj-$(CONFIG_ARCH_BCM_5301X) += clk-nsp.o +obj-$(CONFIG_ARCH_BCM_53573) += clk-bcm53573-ilp.o --- /dev/null +++ b/drivers/clk/bcm/clk-bcm53573-ilp.c @@ -0,0 +1,148 @@ +/* + * Copyright (C) 2016 Rafał Miłecki + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#define PMU_XTAL_FREQ_RATIO 0x66c +#define XTAL_ALP_PER_4ILP 0x00001fff +#define XTAL_CTL_EN 0x80000000 +#define PMU_SLOW_CLK_PERIOD 0x6dc + +struct bcm53573_ilp { + struct clk_hw hw; + struct regmap *regmap; +}; + +static int bcm53573_ilp_enable(struct clk_hw *hw) +{ + struct bcm53573_ilp *ilp = container_of(hw, struct bcm53573_ilp, hw); + + regmap_write(ilp->regmap, PMU_SLOW_CLK_PERIOD, 0x10199); + regmap_write(ilp->regmap, 0x674, 0x10000); + + return 0; +} + +static void bcm53573_ilp_disable(struct clk_hw *hw) +{ + struct bcm53573_ilp *ilp = container_of(hw, struct bcm53573_ilp, hw); + + regmap_write(ilp->regmap, PMU_SLOW_CLK_PERIOD, 0); + regmap_write(ilp->regmap, 0x674, 0); +} + +static unsigned long bcm53573_ilp_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct bcm53573_ilp *ilp = container_of(hw, struct bcm53573_ilp, hw); + struct regmap *regmap = ilp->regmap; + u32 last_val, cur_val; + int sum = 0, num = 0, loop_num = 0; + int avg; + + /* Enable measurement */ + regmap_write(regmap, PMU_XTAL_FREQ_RATIO, XTAL_CTL_EN); + + /* Read initial value */ + regmap_read(regmap, PMU_XTAL_FREQ_RATIO, &last_val); + last_val &= XTAL_ALP_PER_4ILP; + + /* + * At minimum we should loop for a bit to let hardware do the + * measurement. This isn't very accurate however, so for a better + * precision lets try getting 20 different values for and use average. + */ + while (num < 20) { + regmap_read(regmap, PMU_XTAL_FREQ_RATIO, &cur_val); + cur_val &= XTAL_ALP_PER_4ILP; + + if (cur_val != last_val) { + /* Got different value, use it */ + sum += cur_val; + num++; + loop_num = 0; + last_val = cur_val; + } else if (++loop_num > 5000) { + /* Same value over and over, give up */ + sum += cur_val; + num++; + break; + } + + cpu_relax(); + } + + /* Disable measurement to save power */ + regmap_write(regmap, PMU_XTAL_FREQ_RATIO, 0x0); + + avg = sum / num; + + return parent_rate * 4 / avg; +} + +static const struct clk_ops bcm53573_ilp_clk_ops = { + .enable = bcm53573_ilp_enable, + .disable = bcm53573_ilp_disable, + .recalc_rate = bcm53573_ilp_recalc_rate, +}; + +static void bcm53573_ilp_init(struct device_node *np) +{ + struct bcm53573_ilp *ilp; + struct clk_init_data init = { 0 }; + const char *parent_name; + int err; + + ilp = kzalloc(sizeof(*ilp), GFP_KERNEL); + if (!ilp) + return; + + parent_name = of_clk_get_parent_name(np, 0); + if (!parent_name) { + err = -ENOENT; + goto err_free_ilp; + } + + ilp->regmap = syscon_node_to_regmap(of_get_parent(np)); + if (IS_ERR(ilp->regmap)) { + err = PTR_ERR(ilp->regmap); + goto err_free_ilp; + } + + init.name = np->name; + init.ops = &bcm53573_ilp_clk_ops; + init.parent_names = &parent_name; + init.num_parents = 1; + + ilp->hw.init = &init; + err = clk_hw_register(NULL, &ilp->hw); + if (err) + goto err_free_ilp; + + err = of_clk_add_hw_provider(np, of_clk_hw_simple_get, &ilp->hw); + if (err) + goto err_clk_hw_unregister; + + return; + +err_clk_hw_unregister: + clk_hw_unregister(&ilp->hw); +err_free_ilp: + kfree(ilp); + pr_err("Failed to init ILP clock: %d\n", err); +} + +/* We need it very early for arch code, before device model gets ready */ +CLK_OF_DECLARE(bcm53573_ilp_clk, "brcm,bcm53573-ilp", bcm53573_ilp_init);