From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= Date: Wed, 2 Aug 2017 06:40:41 +0200 Subject: [PATCH] ARM: dts: BCM5301X: Specify USB ports for USB LEDs of few devices MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This uses trigger-sources documented in commit 80dc6e1cd85fc ("dt-bindings: leds: document new trigger-sources property") to specify USB ports. Such an information can be used by operating system to setup LEDs behavior. I updated dts files for 7 devices I own and I was able to test. Signed-off-by: Rafał Miłecki Signed-off-by: Florian Fainelli --- arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts | 4 ++++ arch/arm/boot/dts/bcm4708-netgear-r6250.dts | 3 +++ arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts | 6 ++++++ arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts | 4 ++++ arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts | 5 +++++ arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts | 3 +++ arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts | 3 +++ 7 files changed, 28 insertions(+) --- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts +++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts @@ -52,6 +52,10 @@ usb { label = "bcm53xx:blue:usb"; gpios = <&hc595 0 GPIO_ACTIVE_HIGH>; + trigger-sources = <&ohci_port1>, <&ehci_port1>, + <&xhci_port1>, <&ohci_port2>, + <&ehci_port2>; + linux,default-trigger = "usbport"; }; power0 { --- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts +++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts @@ -48,6 +48,9 @@ usb { label = "bcm53xx:blue:usb"; gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>; + trigger-sources = <&ohci_port1>, <&ehci_port1>, + <&xhci_port1>; + linux,default-trigger = "usbport"; }; wireless { --- a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts +++ b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts @@ -42,16 +42,22 @@ usb2 { label = "bcm53xx:white:usb2"; gpios = <&chipcommon 3 GPIO_ACTIVE_HIGH>; + trigger-sources = <&ohci_port2>, <&ehci_port2>; + linux,default-trigger = "usbport"; }; usb3-white { label = "bcm53xx:white:usb3"; gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>; + trigger-sources = <&xhci_port1>; + linux,default-trigger = "usbport"; }; usb3-green { label = "bcm53xx:green:usb3"; gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>; + trigger-sources = <&ohci_port1>, <&ehci_port1>; + linux,default-trigger = "usbport"; }; wps { --- a/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts +++ b/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts @@ -36,6 +36,8 @@ usb2-port1 { label = "bcm53xx:green:usb2-port1"; gpios = <&chipcommon 2 GPIO_ACTIVE_HIGH>; + trigger-sources = <&ohci_port1>, <&ehci_port1>; + linux,default-trigger = "usbport"; }; power { @@ -67,6 +69,8 @@ usb2-port2 { label = "bcm53xx:green:usb2-port2"; gpios = <&chipcommon 13 GPIO_ACTIVE_HIGH>; + trigger-sources = <&ohci_port2>, <&ehci_port2>; + linux,default-trigger = "usbport"; }; }; --- a/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts +++ b/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts @@ -46,11 +46,16 @@ usb3 { label = "bcm53xx:blue:usb3"; gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>; + trigger-sources = <&ohci_port1>, <&ehci_port1>, + <&xhci_port1>; + linux,default-trigger = "usbport"; }; usb2 { label = "bcm53xx:blue:usb2"; gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>; + trigger-sources = <&ohci_port2>, <&ehci_port2>; + linux,default-trigger = "usbport"; }; wan-blue { --- a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts +++ b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts @@ -71,6 +71,9 @@ usb3-white { label = "bcm53xx:white:usb3"; gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>; + trigger-sources = <&ohci_port1>, <&ehci_port1>, + <&xhci_port1>; + linux,default-trigger = "usbport"; }; 2ghz { --- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts +++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts @@ -59,6 +59,9 @@ usb3 { label = "bcm53xx:green:usb3"; gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>; + trigger-sources = <&ohci_port1>, <&ehci_port1>, + <&xhci_port1>; + linux,default-trigger = "usbport"; }; status {