From 15221304a23fd99c84a6da4b68dc0e887150d1ee Mon Sep 17 00:00:00 2001 From: Jacopo Mondi Date: Tue, 16 Jun 2020 16:12:44 +0200 Subject: [PATCH] media: rcar-csi2: Negotiate data lanes number Upstream https://patchwork.linuxtv.org/patch/64675/ Use the newly introduced get_mbus_config() subdevice pad operation to retrieve the remote subdevice MIPI CSI-2 bus configuration and configure the number of active data lanes accordingly. In order to be able to call the remote subdevice operation cache the index of the remote pad connected to the single CSI-2 input port. Signed-off-by: Jacopo Mondi --- drivers/media/platform/rcar-vin/rcar-csi2.c | 74 +++++++++++++++++++-- 1 file changed, 67 insertions(+), 7 deletions(-) --- a/drivers/media/platform/rcar-vin/rcar-csi2.c +++ b/drivers/media/platform/rcar-vin/rcar-csi2.c @@ -362,6 +362,7 @@ struct rcar_csi2 { struct v4l2_async_notifier notifier; struct v4l2_subdev *remote; + unsigned int remote_pad; struct v4l2_mbus_framefmt mf; @@ -407,13 +408,14 @@ static void rcsi2_exit_standby(struct rc reset_control_deassert(priv->rstc); } -static int rcsi2_wait_phy_start(struct rcar_csi2 *priv) +static int rcsi2_wait_phy_start(struct rcar_csi2 *priv, + unsigned int active_lanes) { unsigned int timeout; /* Wait for the clock and data lanes to enter LP-11 state. */ for (timeout = 0; timeout <= 20; timeout++) { - const u32 lane_mask = (1 << priv->lanes) - 1; + const u32 lane_mask = (1 << active_lanes) - 1; if ((rcsi2_read(priv, PHCLM_REG) & PHCLM_STOPSTATECKL) && (rcsi2_read(priv, PHDLM_REG) & lane_mask) == lane_mask) @@ -445,7 +447,8 @@ static int rcsi2_set_phypll(struct rcar_ return 0; } -static int rcsi2_calc_mbps(struct rcar_csi2 *priv, unsigned int bpp) +static int rcsi2_calc_mbps(struct rcar_csi2 *priv, unsigned int bpp, + unsigned int active_lanes) { struct v4l2_subdev *source; struct v4l2_ctrl *ctrl; @@ -470,15 +473,63 @@ static int rcsi2_calc_mbps(struct rcar_c * bps = link_freq * 2 */ mbps = v4l2_ctrl_g_ctrl_int64(ctrl) * bpp; - do_div(mbps, priv->lanes * 1000000); + do_div(mbps, active_lanes * 1000000); return mbps; } +static int rcsi2_config_active_lanes(struct rcar_csi2 *priv, + unsigned int *active_lanes) +{ + struct v4l2_mbus_config mbus_config = { 0 }; + unsigned int num_lanes = (-1U); + int ret; + + *active_lanes = priv->lanes; + ret = v4l2_subdev_call(priv->remote, pad, get_mbus_config, + priv->remote_pad, &mbus_config); + if (ret == -ENOIOCTLCMD) { + dev_dbg(priv->dev, "No remote mbus configuration available\n"); + return 0; + } + + if (ret) { + dev_err(priv->dev, "Failed to get remote mbus configuration\n"); + return ret; + } + + if (mbus_config.type != V4L2_MBUS_CSI2_DPHY) { + dev_err(priv->dev, "Unsupported media bus type %u\n", + mbus_config.type); + return -EINVAL; + } + + if (mbus_config.flags & V4L2_MBUS_CSI2_1_LANE) + num_lanes = 1; + else if (mbus_config.flags & V4L2_MBUS_CSI2_2_LANE) + num_lanes = 2; + else if (mbus_config.flags & V4L2_MBUS_CSI2_3_LANE) + num_lanes = 3; + else if (mbus_config.flags & V4L2_MBUS_CSI2_4_LANE) + num_lanes = 4; + + if (num_lanes > priv->lanes) { + dev_err(priv->dev, + "Unsupported mbus config: too many data lanes %u\n", + num_lanes); + return -EINVAL; + } + + *active_lanes = num_lanes; + + return 0; +} + static int rcsi2_start_receiver(struct rcar_csi2 *priv) { const struct rcar_csi2_format *format; u32 phycnt, vcdt = 0, vcdt2 = 0, fld = 0; + unsigned int active_lanes; unsigned int i; int mbps, ret; @@ -520,10 +571,18 @@ static int rcsi2_start_receiver(struct r fld |= FLD_FLD_NUM(1); } + /* + * Get the number of active data lanes inspecting the remote mbus + * configuration. + */ + ret = rcsi2_config_active_lanes(priv, &active_lanes); + if (ret) + return ret; + phycnt = PHYCNT_ENABLECLK; - phycnt |= (1 << priv->lanes) - 1; + phycnt |= (1 << active_lanes) - 1; - mbps = rcsi2_calc_mbps(priv, format->bpp); + mbps = rcsi2_calc_mbps(priv, format->bpp, active_lanes); if (mbps < 0) return mbps; @@ -570,7 +629,7 @@ static int rcsi2_start_receiver(struct r rcsi2_write(priv, PHYCNT_REG, phycnt | PHYCNT_SHUTDOWNZ); rcsi2_write(priv, PHYCNT_REG, phycnt | PHYCNT_SHUTDOWNZ | PHYCNT_RSTZ); - ret = rcsi2_wait_phy_start(priv); + ret = rcsi2_wait_phy_start(priv, active_lanes); if (ret) return ret; @@ -747,6 +806,7 @@ static int rcsi2_notify_bound(struct v4l } priv->remote = subdev; + priv->remote_pad = pad; dev_dbg(priv->dev, "Bound %s pad: %d\n", subdev->name, pad);