From ddcc0cd30d39445fe4f00ee355f5ec4a7d3405aa Mon Sep 17 00:00:00 2001 From: Dave Stevenson Date: Fri, 11 Feb 2022 14:15:26 +0000 Subject: [PATCH] drm/vc4: Remove entry to ULPS from vc4_dsi post_disable Post_disable was sending the D-PHY sequence to put any device into ULPS suspend mode, and then cutting power to the DSI block. The power-on reset state of the DSI block is for DSI to be in an operational state, not ULPS, so it then never sent the sequence for exiting ULPS. Any attached device that didn't have an external reset therefore remained in ULPS / standby, and didn't function. Use of ULPS isn't well specified in DRM, therefore remove entering it to avoid the above situation. Signed-off-by: Dave Stevenson --- drivers/gpu/drm/vc4/vc4_dsi.c | 2 -- 1 file changed, 2 deletions(-) --- a/drivers/gpu/drm/vc4/vc4_dsi.c +++ b/drivers/gpu/drm/vc4/vc4_dsi.c @@ -816,8 +816,6 @@ static void vc4_dsi_bridge_post_disable( struct vc4_dsi *dsi = bridge_to_vc4_dsi(bridge); struct device *dev = &dsi->pdev->dev; - vc4_dsi_ulps(dsi, true); - clk_disable_unprepare(dsi->pll_phy_clock); clk_disable_unprepare(dsi->escape_clock); clk_disable_unprepare(dsi->pixel_clock);