From c218d35ede9474ffa6231e8be88c8ad28044ca2e Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Noralf=20Tr=C3=B8nnes?= Date: Wed, 3 Nov 2021 12:21:14 +0100 Subject: [PATCH] overlays: Add fbtft overlay MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Add an overlay that provides much of the functionality that fbtft_device did. Signed-off-by: Noralf Trønnes --- arch/arm/boot/dts/overlays/Makefile | 1 + arch/arm/boot/dts/overlays/README | 124 ++++ arch/arm/boot/dts/overlays/fbtft-overlay.dts | 611 +++++++++++++++++++ 3 files changed, 736 insertions(+) create mode 100644 arch/arm/boot/dts/overlays/fbtft-overlay.dts --- a/arch/arm/boot/dts/overlays/Makefile +++ b/arch/arm/boot/dts/overlays/Makefile @@ -49,6 +49,7 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \ enc28j60.dtbo \ enc28j60-spi2.dtbo \ exc3000.dtbo \ + fbtft.dtbo \ fe-pi-audio.dtbo \ fsm-demo.dtbo \ ghost-amp.dtbo \ --- a/arch/arm/boot/dts/overlays/README +++ b/arch/arm/boot/dts/overlays/README @@ -857,6 +857,130 @@ Params: interrupt GPIO use swapxy Touchscreen swapped x y axis +Name: fbtft +Info: Overlay for SPI-connected displays using the fbtft drivers. + + This overlay seeks to replace the functionality provided by fbtft_device + which is now gone from the kernel. + + Most displays from fbtft_device have been ported over. + Example: + dtoverlay=fbtft,spi0-0,rpi-display,reset_pin=23,dc_pin=24,led_pin=18,rotate=270 + + It is also possible to specify the controller (this will use the default + init sequence in the driver). + Example: + dtoverlay=fbtft,spi0-0,ili9341,bgr,reset_pin=23,dc_pin=24,led_pin=18,rotate=270 + + For devices on spi1 or spi2, the interfaces should be enabled + with one of the spi1-1/2/3cs and/or spi2-1/2/3cs overlays. + + The following features of fbtft_device have not been ported over: + - parallel bus is not supported + - the init property which overrides the controller initialization + sequence is not supported as a parameter due to memory limitations in + the bootloader responsible for applying the overlay. + + See https://github.com/notro/fbtft/wiki/FBTFT-RPI-overlays for how to + create an overlay. + +Load: dtoverlay=fbtft,= +Params: + spi- Configure device at spi, cs + (boolean, required) + speed SPI bus speed in Hz (default 32000000) + cpha Shifted clock phase (CPHA) mode + cpol Inverse clock polarity (CPOL) mode + + adafruit18 Adafruit 1.8 + adafruit22 Adafruit 2.2 (old) + adafruit22a Adafruit 2.2 + adafruit28 Adafruit 2.8 + adafruit13m Adafruit 1.3 OLED + admatec_c-berry28 C-Berry28 + dogs102 EA DOGS102 + er_tftm050_2 ER-TFTM070-2 + er_tftm070_5 ER-TFTM070-5 + ew24ha0 EW24HA0 + ew24ha0_9bit EW24HA0 in 9-bit mode + freetronicsoled128 Freetronics OLED128 + hy28a HY28A + hy28b HY28B + itdb28_spi ITDB02-2.8 with SPI interface circuit + mi0283qt-2 Watterott MI0283QT-2 + mi0283qt-9a Watterott MI0283QT-9A + nokia3310 Nokia 3310 + nokia3310a Nokia 3310a + nokia5110 Nokia 5110 + piscreen PiScreen + pitft Adafruit PiTFT 2.8 + pioled ILSoft OLED + rpi-display Watterott rpi-display + sainsmart18 Sainsmart 1.8 + sainsmart32_spi Sainsmart 3.2 with SPI interfce circuit + tinylcd35 TinyLCD 3.5 + tm022hdh26 Tianma TM022HDH26 + tontec35_9481 Tontect 3.5 with ILI9481 controller + tontec35_9486 Tontect 3.5 with ILI9486 controller + waveshare32b Waveshare 3.2 + waveshare22 Waveshare 2.2 + + bd663474 BD663474 display controller + hx8340bn HX8340BN display controller + hx8347d HX8347D display controller + hx8353d HX8353D display controller + hx8357d HX8357D display controller + ili9163 ILI9163 display controller + ili9320 ILI9320 display controller + ili9325 ILI9325 display controller + ili9340 ILI9340 display controller + ili9341 ILI9341 display controller + ili9481 ILI9481 display controller + ili9486 ILI9486 display controller + pcd8544 PCD8544 display controller + ra8875 RA8875 display controller + s6d02a1 S6D02A1 display controller + s6d1121 S6D1121 display controller + seps525 SEPS525 display controller + sh1106 SH1106 display controller + ssd1289 SSD1289 display controller + ssd1305 SSD1305 display controller + ssd1306 SSD1306 display controller + ssd1325 SSD1325 display controller + ssd1331 SSD1331 display controller + ssd1351 SSD1351 display controller + st7735r ST7735R display controller + st7789v ST7789V display controller + tls8204 TLS8204 display controller + uc1611 UC1611 display controller + uc1701 UC1701 display controller + upd161704 UPD161704 display controller + + width Display width in pixels + height Display height in pixels + regwidth Display controller register width (default is + driver specific) + buswidth Display bus interface width (default 8) + debug Debug output level {0-7} + rotate Display rotation {0, 90, 180, 270} (counter + clockwise). Not supported by all drivers. + bgr Enable BGR mode (default off). Use if Red and + Blue are swapped. Not supported by all drivers. + fps Frames per second (default 30). In effect this + states how long the driver will wait after video + memory has been changed until display update + transfer is started. + txbuflen Length of the FBTFT transmit buffer + (default 4096) + startbyte Sets the Start byte used by fb_ili9320, + fb_ili9325 and fb_hx8347d. Common value is 0x70. + gamma String representation of Gamma Curve(s). Driver + specific. Not supported by all drivers. + reset_pin GPIO pin for RESET + dc_pin GPIO pin for D/C + led_pin GPIO pin for LED backlight + + Name: fe-pi-audio Info: Configures the Fe-Pi Audio Sound Card Load: dtoverlay=fe-pi-audio --- /dev/null +++ b/arch/arm/boot/dts/overlays/fbtft-overlay.dts @@ -0,0 +1,611 @@ +/* + * Device Tree overlay for fbtft drivers + */ + +/dts-v1/; +/plugin/; + +/ { + compatible = "brcm,bcm2835"; + + /* adafruit18 */ + fragment@0 { + target = <&display>; + __dormant__ { + compatible = "sitronix,st7735r"; + spi-max-frequency = <32000000>; + gamma = "02 1c 07 12 37 32 29 2d 29 25 2B 39 00 01 03 10\n03 1d 07 06 2E 2C 29 2D 2E 2E 37 3F 00 00 02 10"; + }; + }; + + /* adafruit22 */ + fragment@1 { + target = <&display>; + __dormant__ { + compatible = "himax,hx8340bn"; + spi-max-frequency = <32000000>; + buswidth = <9>; + bgr; + }; + }; + + /* adafruit22a */ + fragment@2 { + target = <&display>; + __dormant__ { + compatible = "ilitek,ili9340"; + spi-max-frequency = <32000000>; + bgr; + }; + }; + + /* adafruit28 */ + fragment@3 { + target = <&display>; + __dormant__ { + compatible = "ilitek,ili9341"; + spi-max-frequency = <32000000>; + bgr; + }; + }; + + /* adafruit13m */ + fragment@4 { + target = <&display>; + __dormant__ { + compatible = "solomon,ssd1306"; + spi-max-frequency = <16000000>; + }; + }; + + /* admatec_c-berry28 */ + fragment@5 { + target = <&display>; + __dormant__ { + compatible = "sitronix,st7789v"; + spi-max-frequency = <48000000>; + init = <0x01000011 + 0x02000078 + 0x0100003A 0x05 + 0x010000B2 0x0C 0x0C 0x00 0x33 0x33 + 0x010000B7 0x35 + 0x010000C2 0x01 0xFF + 0x010000C3 0x17 + 0x010000C4 0x20 + 0x010000BB 0x17 + 0x010000C5 0x20 + 0x010000D0 0xA4 0xA1 + 0x01000029>; + gamma = "D0 00 14 15 13 2C 42 43 4E 09 16 14 18 21\nD0 00 14 15 13 0B 43 55 53 0C 17 14 23 20"; + }; + }; + + /* dogs102 */ + fragment@6 { + target = <&display>; + __dormant__ { + compatible = "UltraChip,uc1701"; + spi-max-frequency = <8000000>; + bgr; + }; + }; + + /* er_tftm050_2 */ + fragment@7 { + target = <&display>; + __dormant__ { + compatible = "raio,ra8875"; + spi-max-frequency = <5000000>; + spi-cpha; + spi-cpol; + width = <480>; + height = <272>; + bgr; + }; + }; + + /* er_tftm070_5 */ + fragment@8 { + target = <&display>; + __dormant__ { + compatible = "raio,ra8875"; + spi-max-frequency = <5000000>; + spi-cpha; + spi-cpol; + width = <800>; + height = <480>; + bgr; + }; + }; + + /* ew24ha0 */ + fragment@9 { + target = <&display>; + __dormant__ { + compatible = "ultrachip,uc1611"; + spi-max-frequency = <32000000>; + spi-cpha; + spi-cpol; + }; + }; + + /* ew24ha0_9bit */ + fragment@10 { + target = <&display>; + __dormant__ { + compatible = "ultrachip,uc1611"; + spi-max-frequency = <32000000>; + spi-cpha; + spi-cpol; + buswidth = <9>; + }; + }; + + /* freetronicsoled128 */ + fragment@11 { + target = <&display>; + __dormant__ { + compatible = "solomon,ssd1351"; + spi-max-frequency = <20000000>; + backlight = <2>; /* FBTFT_ONBOARD_BACKLIGHT */ + bgr; + }; + }; + + /* hy28a */ + fragment@12 { + target = <&display>; + __dormant__ { + compatible = "ilitek,ili9320"; + spi-max-frequency = <32000000>; + spi-cpha; + spi-cpol; + startbyte = <0x70>; + bgr; + }; + }; + + /* hy28b */ + fragment@13 { + target = <&display>; + __dormant__ { + compatible = "ilitek,ili9325"; + spi-max-frequency = <48000000>; + spi-cpha; + spi-cpol; + init = <0x010000e7 0x0010 + 0x01000000 0x0001 + 0x01000001 0x0100 + 0x01000002 0x0700 + 0x01000003 0x1030 + 0x01000004 0x0000 + 0x01000008 0x0207 + 0x01000009 0x0000 + 0x0100000a 0x0000 + 0x0100000c 0x0001 + 0x0100000d 0x0000 + 0x0100000f 0x0000 + 0x01000010 0x0000 + 0x01000011 0x0007 + 0x01000012 0x0000 + 0x01000013 0x0000 + 0x02000032 + 0x01000010 0x1590 + 0x01000011 0x0227 + 0x02000032 + 0x01000012 0x009c + 0x02000032 + 0x01000013 0x1900 + 0x01000029 0x0023 + 0x0100002b 0x000e + 0x02000032 + 0x01000020 0x0000 + 0x01000021 0x0000 + 0x02000032 + 0x01000050 0x0000 + 0x01000051 0x00ef + 0x01000052 0x0000 + 0x01000053 0x013f + 0x01000060 0xa700 + 0x01000061 0x0001 + 0x0100006a 0x0000 + 0x01000080 0x0000 + 0x01000081 0x0000 + 0x01000082 0x0000 + 0x01000083 0x0000 + 0x01000084 0x0000 + 0x01000085 0x0000 + 0x01000090 0x0010 + 0x01000092 0x0000 + 0x01000093 0x0003 + 0x01000095 0x0110 + 0x01000097 0x0000 + 0x01000098 0x0000 + 0x01000007 0x0133 + 0x01000020 0x0000 + 0x01000021 0x0000 + 0x02000064>; + startbyte = <0x70>; + bgr; + fps = <50>; + gamma = "04 1F 4 7 7 0 7 7 6 0\n0F 00 1 7 4 0 0 0 6 7"; + }; + }; + + /* itdb28_spi */ + fragment@14 { + target = <&display>; + __dormant__ { + compatible = "ilitek,ili9325"; + spi-max-frequency = <32000000>; + bgr; + }; + }; + + /* mi0283qt-2 */ + fragment@15 { + target = <&display>; + __dormant__ { + compatible = "himax,hx8347d"; + spi-max-frequency = <32000000>; + startbyte = <0x70>; + bgr; + }; + }; + + /* mi0283qt-9a */ + fragment@16 { + target = <&display>; + __dormant__ { + compatible = "ilitek,ili9341"; + spi-max-frequency = <32000000>; + buswidth = <9>; + bgr; + }; + }; + + /* nokia3310 */ + fragment@17 { + target = <&display>; + __dormant__ { + compatible = "philips,pcd8544"; + spi-max-frequency = <400000>; + }; + }; + + /* nokia3310a */ + fragment@18 { + target = <&display>; + __dormant__ { + compatible = "teralane,tls8204"; + spi-max-frequency = <1000000>; + }; + }; + + /* nokia5110 */ + fragment@19 { + target = <&display>; + __dormant__ { + compatible = "ilitek,ili9163"; + spi-max-frequency = <12000000>; + bgr; + }; + }; + + /* piscreen */ + fragment@20 { + target = <&display>; + __dormant__ { + compatible = "ilitek,ili9486"; + spi-max-frequency = <32000000>; + regwidth = <16>; + bgr; + }; + }; + + /* pitft */ + fragment@21 { + target = <&display>; + __dormant__ { + compatible = "ilitek,ili9340"; + spi-max-frequency = <32000000>; + init = <0x01000001 + 0x02000005 + 0x01000028 + 0x010000EF 0x03 0x80 0x02 + 0x010000CF 0x00 0xC1 0x30 + 0x010000ED 0x64 0x03 0x12 0x81 + 0x010000E8 0x85 0x00 0x78 + 0x010000CB 0x39 0x2C 0x00 0x34 0x02 + 0x010000F7 0x20 + 0x010000EA 0x00 0x00 + 0x010000C0 0x23 + 0x010000C1 0x10 + 0x010000C5 0x3E 0x28 + 0x010000C7 0x86 + 0x0100003A 0x55 + 0x010000B1 0x00 0x18 + 0x010000B6 0x08 0x82 0x27 + 0x010000F2 0x00 + 0x01000026 0x01 + 0x010000E0 0x0F 0x31 0x2B 0x0C 0x0E 0x08 0x4E 0xF1 0x37 0x07 0x10 0x03 0x0E 0x09 0x00 + 0x010000E1 0x00 0x0E 0x14 0x03 0x11 0x07 0x31 0xC1 0x48 0x08 0x0F 0x0C 0x31 0x36 0x0F + 0x01000011 + 0x02000064 + 0x01000029 + 0x02000014>; + bgr; + }; + }; + + /* pioled */ + fragment@22 { + target = <&display>; + __dormant__ { + compatible = "solomon,ssd1351"; + spi-max-frequency = <20000000>; + bgr; + gamma = "0 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 4 4 4 4 4 4 4 4 4 4 4 4"; + }; + }; + + /* rpi-display */ + fragment@23 { + target = <&display>; + __dormant__ { + compatible = "ilitek,ili9341"; + spi-max-frequency = <32000000>; + bgr; + }; + }; + + /* sainsmart18 */ + fragment@24 { + target = <&display>; + __dormant__ { + compatible = "sitronix,st7735r"; + spi-max-frequency = <32000000>; + }; + }; + + /* sainsmart32_spi */ + fragment@25 { + target = <&display>; + __dormant__ { + compatible = "solomon,ssd1289"; + spi-max-frequency = <16000000>; + bgr; + }; + }; + + /* tinylcd35 */ + fragment@26 { + target = <&display>; + __dormant__ { + compatible = "neosec,tinylcd"; + spi-max-frequency = <32000000>; + bgr; + }; + }; + + /* tm022hdh26 */ + fragment@27 { + target = <&display>; + __dormant__ { + compatible = "ilitek,ili9341"; + spi-max-frequency = <32000000>; + bgr; + }; + }; + + /* tontec35_9481 - boards before 02 July 2014 */ + fragment@28 { + target = <&display>; + __dormant__ { + compatible = "ilitek,ili9481"; + spi-max-frequency = <128000000>; + spi-cpha; + spi-cpol; + bgr; + }; + }; + + /* tontec35_9486 - boards after 02 July 2014 */ + fragment@29 { + target = <&display>; + __dormant__ { + compatible = "ilitek,ili9486"; + spi-max-frequency = <128000000>; + spi-cpha; + spi-cpol; + bgr; + }; + }; + + /* waveshare32b */ + fragment@30 { + target = <&display>; + __dormant__ { + compatible = "ilitek,ili9340"; + spi-max-frequency = <48000000>; + init = <0x010000CB 0x39 0x2C 0x00 0x34 0x02 + 0x010000CF 0x00 0xC1 0x30 + 0x010000E8 0x85 0x00 0x78 + 0x010000EA 0x00 0x00 + 0x010000ED 0x64 0x03 0x12 0x81 + 0x010000F7 0x20 + 0x010000C0 0x23 + 0x010000C1 0x10 + 0x010000C5 0x3E 0x28 + 0x010000C7 0x86 + 0x01000036 0x28 + 0x0100003A 0x55 + 0x010000B1 0x00 0x18 + 0x010000B6 0x08 0x82 0x27 + 0x010000F2 0x00 + 0x01000026 0x01 + 0x010000E0 0x0F 0x31 0x2B 0x0C 0x0E 0x08 0x4E 0xF1 0x37 0x07 0x10 0x03 0x0E 0x09 0x00 + 0x010000E1 0x00 0x0E 0x14 0x03 0x11 0x07 0x31 0xC1 0x48 0x08 0x0F 0x0C 0x31 0x36 0x0F + 0x01000011 + 0x02000078 + 0x01000029 + 0x0100002C>; + bgr; + }; + }; + + /* waveshare22 */ + fragment@31 { + target = <&display>; + __dormant__ { + compatible = "hitachi,bd663474"; + spi-max-frequency = <32000000>; + spi-cpha; + spi-cpol; + }; + }; + + spidev_fragment: fragment@100 { + target-path = "spi0/spidev@0"; + __overlay__ { + status = "disabled"; + }; + }; + + display_fragment: fragment@101 { + target = <&spi0>; + __overlay__ { + /* needed to avoid dtc warning */ + #address-cells = <1>; + #size-cells = <0>; + + status = "okay"; + + display: display@0{ + reg = <0>; + spi-max-frequency = <32000000>; + fps = <30>; + buswidth = <8>; + }; + }; + }; + + __overrides__ { + spi0-0 = <&display_fragment>, "target:0=",<&spi0>, + <&spidev_fragment>, "target-path=spi0/spidev@0", + <&display>, "reg:0=0"; + spi0-1 = <&display_fragment>, "target:0=",<&spi0>, + <&spidev_fragment>, "target-path=spi0/spidev@1", + <&display>, "reg:0=1"; + spi1-0 = <&display_fragment>, "target:0=",<&spi1>, + <&spidev_fragment>, "target-path=spi1/spidev@0", + <&display>, "reg:0=0"; + spi1-1 = <&display_fragment>, "target:0=",<&spi1>, + <&spidev_fragment>, "target-path=spi1/spidev@1", + <&display>, "reg:0=1"; + spi1-2 = <&display_fragment>, "target:0=",<&spi1>, + <&spidev_fragment>, "target-path=spi1/spidev@2", + <&display>, "reg:0=2"; + spi2-0 = <&display_fragment>, "target:0=",<&spi2>, + <&spidev_fragment>, "target-path=spi2/spidev@0", + <&display>, "reg:0=0"; + spi2-1 = <&display_fragment>, "target:0=",<&spi2>, + <&spidev_fragment>, "target-path=spi2/spidev@1", + <&display>, "reg:0=1"; + spi2-2 = <&display_fragment>, "target:0=",<&spi2>, + <&spidev_fragment>, "target-path=spi2/spidev@2", + <&display>, "reg:0=2"; + + speed = <&display>, "spi-max-frequency:0"; + cpha = <&display>, "spi-cpha?"; + cpol = <&display>, "spi-cpol?"; + + /* Displays */ + adafruit18 = <0>, "+0"; + adafruit22 = <0>, "+1"; + adafruit22a = <0>, "+2"; + adafruit28 = <0>, "+3"; + adafruit13m = <0>, "+4"; + admatec_c-berry28 = <0>, "+5"; + dogs102 = <0>, "+6"; + er_tftm050_2 = <0>, "+7"; + er_tftm070_5 = <0>, "+8"; + ew24ha0 = <0>, "+9"; + ew24ha0_9bit = <0>, "+10"; + freetronicsoled128 = <0>, "+11"; + hy28a = <0>, "+12"; + hy28b = <0>, "+13"; + itdb28_spi = <0>, "+14"; + mi0283qt-2 = <0>, "+15"; + mi0283qt-9a = <0>, "+16"; + nokia3310 = <0>, "+17"; + nokia3310a = <0>, "+18"; + nokia5110 = <0>, "+19"; + piscreen = <0>, "+20"; + pitft = <0>, "+21"; + pioled = <0>, "+22"; + rpi-display = <0>, "+23"; + sainsmart18 = <0>, "+24"; + sainsmart32_spi = <0>, "+25"; + tinylcd35 = <0>, "+26"; + tm022hdh26 = <0>, "+27"; + tontec35_9481 = <0>, "+28"; + tontec35_9486 = <0>, "+29"; + waveshare32b = <0>, "+30"; + waveshare22 = <0>, "+31"; + + /* Controllers */ + bd663474 = <&display>, "compatible=hitachi,bd663474"; + hx8340bn = <&display>, "compatible=himax,hx8340bn"; + hx8347d = <&display>, "compatible=himax,hx8347d"; + hx8353d = <&display>, "compatible=himax,hx8353d"; + hx8357d = <&display>, "compatible=himax,hx8357d"; + ili9163 = <&display>, "compatible=ilitek,ili9163"; + ili9320 = <&display>, "compatible=ilitek,ili9320"; + ili9325 = <&display>, "compatible=ilitek,ili9325"; + ili9340 = <&display>, "compatible=ilitek,ili9340"; + ili9341 = <&display>, "compatible=ilitek,ili9341"; + ili9481 = <&display>, "compatible=ilitek,ili9481"; + ili9486 = <&display>, "compatible=ilitek,ili9486"; + pcd8544 = <&display>, "compatible=philips,pcd8544"; + ra8875 = <&display>, "compatible=raio,ra8875"; + s6d02a1 = <&display>, "compatible=samsung,s6d02a1"; + s6d1121 = <&display>, "compatible=samsung,s6d1121"; + seps525 = <&display>, "compatible=syncoam,seps525"; + sh1106 = <&display>, "compatible=sinowealth,sh1106"; + ssd1289 = <&display>, "compatible=solomon,ssd1289"; + ssd1305 = <&display>, "compatible=solomon,ssd1305"; + ssd1306 = <&display>, "compatible=solomon,ssd1306"; + ssd1325 = <&display>, "compatible=solomon,ssd1325"; + ssd1331 = <&display>, "compatible=solomon,ssd1331"; + ssd1351 = <&display>, "compatible=solomon,ssd1351"; + st7735r = <&display>, "compatible=sitronix,st7735r"; + st7789v = <&display>, "compatible=sitronix,st7789v"; + tls8204 = <&display>, "compatible=teralane,tls8204"; + uc1611 = <&display>, "compatible=ultrachip,uc1611"; + uc1701 = <&display>, "compatible=UltraChip,uc1701"; + upd161704 = <&display>, "compatible=nec,upd161704"; + + width = <&display>, "width:0"; + height = <&display>, "height:0"; + regwidth = <&display>, "regwidth:0"; + buswidth = <&display>, "buswidth:0"; + debug = <&display>, "debug:0"; + rotate = <&display>, "rotate:0"; + bgr = <&display>, "bgr?"; + fps = <&display>, "fps:0"; + txbuflen = <&display>, "txbuflen:0"; + startbyte = <&display>, "startbyte:0"; + gamma = <&display>, "gamma"; + + reset_pin = <&display>, "reset-gpios:0=", <&gpio>, + <&display>, "reset-gpios:4", + <&display>, "reset-gpios:8=1"; /* GPIO_ACTIVE_LOW */ + dc_pin = <&display>, "dc-gpios:0=", <&gpio>, + <&display>, "dc-gpios:4", + <&display>, "dc-gpios:8=0"; /* GPIO_ACTIVE_HIGH */ + led_pin = <&display>, "led-gpios:0=", <&gpio>, + <&display>, "led-gpios:4", + <&display>, "led-gpios:8=0"; /* GPIO_ACTIVE_HIGH */ + }; +};