From 8f32ff08609bb5e7fd4fb38fe7518891e0e22f45 Mon Sep 17 00:00:00 2001 From: Dave Stevenson Date: Wed, 10 Feb 2021 18:46:22 +0000 Subject: [PATCH] drm/vc4: Fix dsi0 interrupt support. DSI0 seemingly had very little or no testing as a load of the register mappings were incorrect/missing, so host transfers always timed out due to enabling/checking incorrect bits in the interrupt enable and status registers. Signed-off-by: Dave Stevenson --- drivers/gpu/drm/vc4/vc4_dsi.c | 111 ++++++++++++++++++++++++++-------- 1 file changed, 85 insertions(+), 26 deletions(-) --- a/drivers/gpu/drm/vc4/vc4_dsi.c +++ b/drivers/gpu/drm/vc4/vc4_dsi.c @@ -181,8 +181,50 @@ #define DSI0_TXPKT_PIX_FIFO 0x20 /* AKA PIX_FIFO */ -#define DSI0_INT_STAT 0x24 -#define DSI0_INT_EN 0x28 +#define DSI0_INT_STAT 0x24 +#define DSI0_INT_EN 0x28 +# define DSI0_INT_FIFO_ERR BIT(25) +# define DSI0_INT_CMDC_DONE_MASK VC4_MASK(24, 23) +# define DSI0_INT_CMDC_DONE_SHIFT 23 +# define DSI0_INT_CMDC_DONE_NO_REPEAT 1 +# define DSI0_INT_CMDC_DONE_REPEAT 3 +# define DSI0_INT_PHY_DIR_RTF BIT(22) +# define DSI0_INT_PHY_D1_ULPS BIT(21) +# define DSI0_INT_PHY_D1_STOP BIT(20) +# define DSI0_INT_PHY_RXLPDT BIT(19) +# define DSI0_INT_PHY_RXTRIG BIT(18) +# define DSI0_INT_PHY_D0_ULPS BIT(17) +# define DSI0_INT_PHY_D0_LPDT BIT(16) +# define DSI0_INT_PHY_D0_FTR BIT(15) +# define DSI0_INT_PHY_D0_STOP BIT(14) +/* Signaled when the clock lane enters the given state. */ +# define DSI0_INT_PHY_CLK_ULPS BIT(13) +# define DSI0_INT_PHY_CLK_HS BIT(12) +# define DSI0_INT_PHY_CLK_FTR BIT(11) +/* Signaled on timeouts */ +# define DSI0_INT_PR_TO BIT(10) +# define DSI0_INT_TA_TO BIT(9) +# define DSI0_INT_LPRX_TO BIT(8) +# define DSI0_INT_HSTX_TO BIT(7) +/* Contention on a line when trying to drive the line low */ +# define DSI0_INT_ERR_CONT_LP1 BIT(6) +# define DSI0_INT_ERR_CONT_LP0 BIT(5) +/* Control error: incorrect line state sequence on data lane 0. */ +# define DSI0_INT_ERR_CONTROL BIT(4) +# define DSI0_INT_ERR_SYNC_ESC BIT(3) +# define DSI0_INT_RX2_PKT BIT(2) +# define DSI0_INT_RX1_PKT BIT(1) +# define DSI0_INT_CMD_PKT BIT(0) + +#define DSI0_INTERRUPTS_ALWAYS_ENABLED (DSI0_INT_ERR_SYNC_ESC | \ + DSI0_INT_ERR_CONTROL | \ + DSI0_INT_ERR_CONT_LP0 | \ + DSI0_INT_ERR_CONT_LP1 | \ + DSI0_INT_HSTX_TO | \ + DSI0_INT_LPRX_TO | \ + DSI0_INT_TA_TO | \ + DSI0_INT_PR_TO) + # define DSI1_INT_PHY_D3_ULPS BIT(30) # define DSI1_INT_PHY_D3_STOP BIT(29) # define DSI1_INT_PHY_D2_ULPS BIT(28) @@ -894,6 +936,9 @@ static void vc4_dsi_encoder_enable(struc DSI_PORT_WRITE(PHY_AFEC0, afec0); + /* AFEC reset hold time */ + mdelay(1); + DSI_PORT_WRITE(PHY_AFEC1, VC4_SET_FIELD(6, DSI0_PHY_AFEC1_IDR_DLANE1) | VC4_SET_FIELD(6, DSI0_PHY_AFEC1_IDR_DLANE0) | @@ -1060,12 +1105,9 @@ static void vc4_dsi_encoder_enable(struc DSI_PORT_WRITE(CTRL, DSI_PORT_READ(CTRL) | DSI1_CTRL_EN); /* Bring AFE out of reset. */ - if (dsi->variant->port == 0) { - } else { - DSI_PORT_WRITE(PHY_AFEC0, - DSI_PORT_READ(PHY_AFEC0) & - ~DSI1_PHY_AFEC0_RESET); - } + DSI_PORT_WRITE(PHY_AFEC0, + DSI_PORT_READ(PHY_AFEC0) & + ~DSI_PORT_BIT(PHY_AFEC0_RESET)); vc4_dsi_ulps(dsi, false); @@ -1184,13 +1226,28 @@ static ssize_t vc4_dsi_host_transfer(str /* Enable the appropriate interrupt for the transfer completion. */ dsi->xfer_result = 0; reinit_completion(&dsi->xfer_completion); - DSI_PORT_WRITE(INT_STAT, DSI1_INT_TXPKT1_DONE | DSI1_INT_PHY_DIR_RTF); - if (msg->rx_len) { - DSI_PORT_WRITE(INT_EN, (DSI1_INTERRUPTS_ALWAYS_ENABLED | - DSI1_INT_PHY_DIR_RTF)); + if (dsi->variant->port == 0) { + DSI_PORT_WRITE(INT_STAT, + DSI0_INT_CMDC_DONE_MASK | DSI1_INT_PHY_DIR_RTF); + if (msg->rx_len) { + DSI_PORT_WRITE(INT_EN, (DSI0_INTERRUPTS_ALWAYS_ENABLED | + DSI0_INT_PHY_DIR_RTF)); + } else { + DSI_PORT_WRITE(INT_EN, + (DSI0_INTERRUPTS_ALWAYS_ENABLED | + VC4_SET_FIELD(DSI0_INT_CMDC_DONE_NO_REPEAT, + DSI0_INT_CMDC_DONE))); + } } else { - DSI_PORT_WRITE(INT_EN, (DSI1_INTERRUPTS_ALWAYS_ENABLED | - DSI1_INT_TXPKT1_DONE)); + DSI_PORT_WRITE(INT_STAT, + DSI1_INT_TXPKT1_DONE | DSI1_INT_PHY_DIR_RTF); + if (msg->rx_len) { + DSI_PORT_WRITE(INT_EN, (DSI1_INTERRUPTS_ALWAYS_ENABLED | + DSI1_INT_PHY_DIR_RTF)); + } else { + DSI_PORT_WRITE(INT_EN, (DSI1_INTERRUPTS_ALWAYS_ENABLED | + DSI1_INT_TXPKT1_DONE)); + } } /* Send the packet. */ @@ -1207,7 +1264,7 @@ static ssize_t vc4_dsi_host_transfer(str ret = dsi->xfer_result; } - DSI_PORT_WRITE(INT_EN, DSI1_INTERRUPTS_ALWAYS_ENABLED); + DSI_PORT_WRITE(INT_EN, DSI_PORT_BIT(INTERRUPTS_ALWAYS_ENABLED)); if (ret) goto reset_fifo_and_return; @@ -1253,7 +1310,7 @@ reset_fifo_and_return: DSI_PORT_BIT(CTRL_RESET_FIFOS)); DSI_PORT_WRITE(TXPKT1C, 0); - DSI_PORT_WRITE(INT_EN, DSI1_INTERRUPTS_ALWAYS_ENABLED); + DSI_PORT_WRITE(INT_EN, DSI_PORT_BIT(INTERRUPTS_ALWAYS_ENABLED)); return ret; } @@ -1390,26 +1447,28 @@ static irqreturn_t vc4_dsi_irq_handler(i DSI_PORT_WRITE(INT_STAT, stat); dsi_handle_error(dsi, &ret, stat, - DSI1_INT_ERR_SYNC_ESC, "LPDT sync"); + DSI_PORT_BIT(INT_ERR_SYNC_ESC), "LPDT sync"); dsi_handle_error(dsi, &ret, stat, - DSI1_INT_ERR_CONTROL, "data lane 0 sequence"); + DSI_PORT_BIT(INT_ERR_CONTROL), "data lane 0 sequence"); dsi_handle_error(dsi, &ret, stat, - DSI1_INT_ERR_CONT_LP0, "LP0 contention"); + DSI_PORT_BIT(INT_ERR_CONT_LP0), "LP0 contention"); dsi_handle_error(dsi, &ret, stat, - DSI1_INT_ERR_CONT_LP1, "LP1 contention"); + DSI_PORT_BIT(INT_ERR_CONT_LP1), "LP1 contention"); dsi_handle_error(dsi, &ret, stat, - DSI1_INT_HSTX_TO, "HSTX timeout"); + DSI_PORT_BIT(INT_HSTX_TO), "HSTX timeout"); dsi_handle_error(dsi, &ret, stat, - DSI1_INT_LPRX_TO, "LPRX timeout"); + DSI_PORT_BIT(INT_LPRX_TO), "LPRX timeout"); dsi_handle_error(dsi, &ret, stat, - DSI1_INT_TA_TO, "turnaround timeout"); + DSI_PORT_BIT(INT_TA_TO), "turnaround timeout"); dsi_handle_error(dsi, &ret, stat, - DSI1_INT_PR_TO, "peripheral reset timeout"); + DSI_PORT_BIT(INT_PR_TO), "peripheral reset timeout"); - if (stat & (DSI1_INT_TXPKT1_DONE | DSI1_INT_PHY_DIR_RTF)) { + if (stat & ((dsi->variant->port ? DSI1_INT_TXPKT1_DONE : + DSI0_INT_CMDC_DONE_MASK) | + DSI_PORT_BIT(INT_PHY_DIR_RTF))) { complete(&dsi->xfer_completion); ret = IRQ_HANDLED; - } else if (stat & DSI1_INT_HSTX_TO) { + } else if (stat & DSI_PORT_BIT(INT_HSTX_TO)) { complete(&dsi->xfer_completion); dsi->xfer_result = -ETIMEDOUT; ret = IRQ_HANDLED;