From 8a120b47005fccce4534f8a73c3a3deda92f95fa Mon Sep 17 00:00:00 2001 From: Phil Elwell Date: Wed, 29 Jan 2020 14:32:51 +0000 Subject: [PATCH] overlays: Correct the eth_led* colour assignments See: https://github.com/raspberrypi/firmware/issues/1311 Signed-off-by: Phil Elwell --- arch/arm/boot/dts/overlays/README | 17 +++++++++-------- 1 file changed, 9 insertions(+), 8 deletions(-) --- a/arch/arm/boot/dts/overlays/README +++ b/arch/arm/boot/dts/overlays/README @@ -109,27 +109,28 @@ Params: Legal values are 2, 3, 4, 5 and 0, where 0 means never downshift (default 2). Pi3B+ only. - eth_led0 Set mode of LED0 (usually orange). The legal - values are: + eth_led0 Set mode of LED0 - amber on Pi3B+ (default "1"), + green on Pi4 (default "0"). + The legal values are: Pi3B+ - 0=link/activity 1=link1000/activity (default) + 0=link/activity 1=link1000/activity 2=link100/activity 3=link10/activity 4=link100/1000/activity 5=link10/1000/activity 6=link10/100/activity 14=off 15=on Pi4 - 0=Speed/Activity (default) 1=Speed - 2=Speed/Flash activity 3=FDX + 0=Speed/Activity 1=Speed + 2=Flash activity 3=FDX 4=Off 5=On 6=Alt 7=Speed/Flash 8=Link 9=Activity - eth_led1 Set mode of LED1 (usually green) (Pi3B+ default - "6", Pi4 default "8"). See eth_led0 for legal - values. + eth_led1 Set mode of LED1 - green on Pi3B (default "6"), + amber on Pi4 (default "8"). See eth_led0 for + legal values. eth_max_speed Set the maximum speed a link is allowed to negotiate. Legal values are 10, 100 and