From 3f6fe9da303fc01fb754a0a639ec3cdb813e8780 Mon Sep 17 00:00:00 2001 From: Stefan Wahren Date: Sun, 19 May 2019 12:20:00 +0200 Subject: [PATCH] ARM: bcm283x: Reduce register ranges for UART, SPI and I2C The assigned register ranges for UART, SPI and I2C were too wasteful. In order to avoid overlapping with the new functions on BCM2838 reduce the ranges. Signed-off-by: Stefan Wahren --- arch/arm/boot/dts/bcm283x.dtsi | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) --- a/arch/arm/boot/dts/bcm283x.dtsi +++ b/arch/arm/boot/dts/bcm283x.dtsi @@ -387,7 +387,7 @@ uart0: serial@7e201000 { compatible = "brcm,bcm2835-pl011", "arm,pl011", "arm,primecell"; - reg = <0x7e201000 0x1000>; + reg = <0x7e201000 0x200>; interrupts = <2 25>; clocks = <&clocks BCM2835_CLOCK_UART>, <&clocks BCM2835_CLOCK_VPU>; @@ -418,7 +418,7 @@ spi: spi@7e204000 { compatible = "brcm,bcm2835-spi"; - reg = <0x7e204000 0x1000>; + reg = <0x7e204000 0x200>; interrupts = <2 22>; clocks = <&clocks BCM2835_CLOCK_VPU>; #address-cells = <1>; @@ -428,7 +428,7 @@ i2c0: i2c@7e205000 { compatible = "brcm,bcm2835-i2c"; - reg = <0x7e205000 0x1000>; + reg = <0x7e205000 0x200>; interrupts = <2 21>; clocks = <&clocks BCM2835_CLOCK_VPU>; #address-cells = <1>;