diff -urN linux.old/drivers/mtd/devices/Kconfig linux.dev/drivers/mtd/devices/Kconfig --- linux.old/drivers/mtd/devices/Kconfig 2006-11-29 22:57:37.000000000 +0100 +++ linux.dev/drivers/mtd/devices/Kconfig 2006-12-15 00:03:11.000000000 +0100 @@ -68,6 +68,10 @@ used for program and data storage. Set up your spi devices with the right board-specific platform data. +config MTD_SPIFLASH + tristate "Atheros AR2315/6/7 SPI Flash support" + depends on MTD && AR531X_COBRA + config MTD_SLRAM tristate "Uncached system RAM" depends on MTD diff -urN linux.old/drivers/mtd/devices/Makefile linux.dev/drivers/mtd/devices/Makefile --- linux.old/drivers/mtd/devices/Makefile 2006-11-29 22:57:37.000000000 +0100 +++ linux.dev/drivers/mtd/devices/Makefile 2006-12-15 00:03:11.000000000 +0100 @@ -17,3 +17,4 @@ obj-$(CONFIG_MTD_BLOCK2MTD) += block2mtd.o obj-$(CONFIG_MTD_DATAFLASH) += mtd_dataflash.o obj-$(CONFIG_MTD_M25P80) += m25p80.o +obj-$(CONFIG_MTD_SPIFLASH) += spiflash.o diff -urN linux.old/drivers/mtd/devices/spiflash.c linux.dev/drivers/mtd/devices/spiflash.c --- linux.old/drivers/mtd/devices/spiflash.c 1970-01-01 01:00:00.000000000 +0100 +++ linux.dev/drivers/mtd/devices/spiflash.c 2006-12-15 08:26:11.000000000 +0100 @@ -0,0 +1,595 @@ + +/* + * MTD driver for the SPI Flash Memory support. + * + * Copyright (c) 2005-2006 Atheros Communications Inc. + * Copyright (C) 2006 FON Technology, SL. + * Copyright (C) 2006 Imre Kaloz + * Copyright (C) 2006 Felix Fietkau + * + * This code is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +/*=========================================================================== +** !!!! VERY IMPORTANT NOTICE !!!! FLASH DATA STORED IN LITTLE ENDIAN FORMAT +** +** This module contains the Serial Flash access routines for the Atheros SOC. +** The Atheros SOC integrates a SPI flash controller that is used to access +** serial flash parts. The SPI flash controller executes in "Little Endian" +** mode. THEREFORE, all WRITES and READS from the MIPS CPU must be +** BYTESWAPPED! The SPI Flash controller hardware by default performs READ +** ONLY byteswapping when accessed via the SPI Flash Alias memory region +** (Physical Address 0x0800_0000 - 0x0fff_ffff). The data stored in the +** flash sectors is stored in "Little Endian" format. +** +** The spiflash_write() routine performs byteswapping on all write +** operations. +**===========================================================================*/ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "spiflash.h" + +/* debugging */ +/* #define SPIFLASH_DEBUG */ + +#ifndef __BIG_ENDIAN +#error This driver currently only works with big endian CPU. +#endif + +#define MAX_PARTS 32 + +static char module_name[] = "spiflash"; + +#define MIN(a,b) ((a) < (b) ? (a) : (b)) +#define FALSE 0 +#define TRUE 1 + +#define ROOTFS_NAME "rootfs" + +static __u32 spiflash_regread32(int reg); +static void spiflash_regwrite32(int reg, __u32 data); +static __u32 spiflash_sendcmd (int op); + +static void __init spidata_init(void); +int __init spiflash_init (void); +void __exit spiflash_exit (void); +static int spiflash_probe (void); +static int spiflash_erase (struct mtd_info *mtd,struct erase_info *instr); +static int spiflash_read (struct mtd_info *mtd, loff_t from,size_t len,size_t *retlen,u_char *buf); +static int spiflash_write (struct mtd_info *mtd,loff_t to,size_t len,size_t *retlen,const u_char *buf); + +/* Flash configuration table */ +struct flashconfig { + __u32 byte_cnt; + __u32 sector_cnt; + __u32 sector_size; + __u32 cs_addrmask; +} flashconfig_tbl[MAX_FLASH] = + { + { 0, 0, 0, 0}, + { STM_1MB_BYTE_COUNT, STM_1MB_SECTOR_COUNT, STM_1MB_SECTOR_SIZE, 0x0}, + { STM_2MB_BYTE_COUNT, STM_2MB_SECTOR_COUNT, STM_2MB_SECTOR_SIZE, 0x0}, + { STM_4MB_BYTE_COUNT, STM_4MB_SECTOR_COUNT, STM_4MB_SECTOR_SIZE, 0x0}, + { STM_8MB_BYTE_COUNT, STM_8MB_SECTOR_COUNT, STM_8MB_SECTOR_SIZE, 0x0} + }; + +/* Mapping of generic opcodes to STM serial flash opcodes */ +struct opcodes { + __u16 code; + __s8 tx_cnt; + __s8 rx_cnt; +} stm_opcodes[] = { + {STM_OP_WR_ENABLE, 1, 0}, + {STM_OP_WR_DISABLE, 1, 0}, + {STM_OP_RD_STATUS, 1, 1}, + {STM_OP_WR_STATUS, 1, 0}, + {STM_OP_RD_DATA, 4, 4}, + {STM_OP_FAST_RD_DATA, 1, 0}, + {STM_OP_PAGE_PGRM, 8, 0}, + {STM_OP_SECTOR_ERASE, 4, 0}, + {STM_OP_BULK_ERASE, 1, 0}, + {STM_OP_DEEP_PWRDOWN, 1, 0}, + {STM_OP_RD_SIG, 4, 1} +}; + +/* Driver private data structure */ +struct spiflash_data { + struct mtd_info *mtd; + struct mtd_partition *parsed_parts; /* parsed partitions */ + void *spiflash_readaddr; /* memory mapped data for read */ + void *spiflash_mmraddr; /* memory mapped register space */ + spinlock_t mutex; +}; + +static struct spiflash_data *spidata; + +extern int parse_redboot_partitions(struct mtd_info *master, struct mtd_partition **pparts); + +/***************************************************************************************************/ + +static __u32 +spiflash_regread32(int reg) +{ + volatile __u32 *data = (__u32 *)(spidata->spiflash_mmraddr + reg); + + return (*data); +} + +static void +spiflash_regwrite32(int reg, __u32 data) +{ + volatile __u32 *addr = (__u32 *)(spidata->spiflash_mmraddr + reg); + + *addr = data; + return; +} + +static __u32 +spiflash_sendcmd (int op) +{ + __u32 reg; + __u32 mask; + struct opcodes *ptr_opcode; + + ptr_opcode = &stm_opcodes[op]; + + do { + reg = spiflash_regread32(SPI_FLASH_CTL); + } while (reg & SPI_CTL_BUSY); + + spiflash_regwrite32(SPI_FLASH_OPCODE, ptr_opcode->code); + + reg = (reg & ~SPI_CTL_TX_RX_CNT_MASK) | ptr_opcode->tx_cnt | + (ptr_opcode->rx_cnt << 4) | SPI_CTL_START; + + spiflash_regwrite32(SPI_FLASH_CTL, reg); + + if (ptr_opcode->rx_cnt > 0) { + do { + reg = spiflash_regread32(SPI_FLASH_CTL); + } while (reg & SPI_CTL_BUSY); + + reg = (__u32) spiflash_regread32(SPI_FLASH_DATA); + + switch (ptr_opcode->rx_cnt) { + case 1: + mask = 0x000000ff; + break; + case 2: + mask = 0x0000ffff; + break; + case 3: + mask = 0x00ffffff; + break; + default: + mask = 0xffffffff; + break; + } + + reg &= mask; + } + else { + reg = 0; + } + + return reg; +} + +/* Probe SPI flash device + * Function returns 0 for failure. + * and flashconfig_tbl array index for success. + */ +static int +spiflash_probe (void) +{ + __u32 sig; + int flash_size; + + if (!spidata) + spidata_init(); + + if (!spidata) /* init failed */ + return 0; + + /* Read the signature on the flash device */ + sig = spiflash_sendcmd(SPI_RD_SIG); + + switch (sig) { + case STM_8MBIT_SIGNATURE: + flash_size = FLASH_1MB; + break; + case STM_16MBIT_SIGNATURE: + flash_size = FLASH_2MB; + break; + case STM_32MBIT_SIGNATURE: + flash_size = FLASH_4MB; + break; + case STM_64MBIT_SIGNATURE: + flash_size = FLASH_8MB; + break; + default: + printk (KERN_WARNING "%s: Read of flash device signature failed!\n", module_name); + return (0); + } + + return (flash_size); +} + + +static int +spiflash_erase (struct mtd_info *mtd,struct erase_info *instr) +{ + struct opcodes *ptr_opcode; + __u32 temp, reg; + int finished = FALSE; + +#ifdef SPIFLASH_DEBUG + printk (KERN_DEBUG "%s(addr = 0x%.8x, len = %d)\n",__FUNCTION__,instr->addr,instr->len); +#endif + + /* sanity checks */ + if (instr->addr + instr->len > mtd->size) return (-EINVAL); + + ptr_opcode = &stm_opcodes[SPI_SECTOR_ERASE]; + + temp = ((__u32)instr->addr << 8) | (__u32)(ptr_opcode->code); + spin_lock(&spidata->mutex); + spiflash_sendcmd(SPI_WRITE_ENABLE); + do { + schedule(); + reg = spiflash_regread32(SPI_FLASH_CTL); + } while (reg & SPI_CTL_BUSY); + + spiflash_regwrite32(SPI_FLASH_OPCODE, temp); + + reg = (reg & ~SPI_CTL_TX_RX_CNT_MASK) | ptr_opcode->tx_cnt | SPI_CTL_START; + spiflash_regwrite32(SPI_FLASH_CTL, reg); + + do { + schedule(); + reg = spiflash_sendcmd(SPI_RD_STATUS); + if (!(reg & SPI_STATUS_WIP)) { + finished = TRUE; + } + } while (!finished); + spin_unlock(&spidata->mutex); + + instr->state = MTD_ERASE_DONE; + if (instr->callback) instr->callback (instr); + +#ifdef SPIFLASH_DEBUG + printk (KERN_DEBUG "%s return\n",__FUNCTION__); +#endif + return (0); +} + +static int +spiflash_read (struct mtd_info *mtd, loff_t from,size_t len,size_t *retlen,u_char *buf) +{ + u_char *read_addr; + +#ifdef SPIFLASH_DEBUG + printk (KERN_DEBUG "%s(from = 0x%.8x, len = %d)\n",__FUNCTION__,(__u32) from,(int)len); +#endif + + /* sanity checks */ + if (!len) return (0); + if (from + len > mtd->size) return (-EINVAL); + + + /* we always read len bytes */ + *retlen = len; + + read_addr = (u_char *)(spidata->spiflash_readaddr + from); + spin_lock(&spidata->mutex); + memcpy(buf, read_addr, len); + spin_unlock(&spidata->mutex); + + return (0); +} + +static int +spiflash_write (struct mtd_info *mtd,loff_t to,size_t len,size_t *retlen,const u_char *buf) +{ + int done = FALSE, page_offset, bytes_left, finished; + __u32 xact_len, spi_data = 0, opcode, reg; + +#ifdef SPIFLASH_DEBUG + printk (KERN_DEBUG "%s(to = 0x%.8x, len = %d)\n",__FUNCTION__,(__u32) to,len); +#endif + + *retlen = 0; + + /* sanity checks */ + if (!len) return (0); + if (to + len > mtd->size) return (-EINVAL); + + opcode = stm_opcodes[SPI_PAGE_PROGRAM].code; + bytes_left = len; + + while (done == FALSE) { + xact_len = MIN(bytes_left, sizeof(__u32)); + + /* 32-bit writes cannot span across a page boundary + * (256 bytes). This types of writes require two page + * program operations to handle it correctly. The STM part + * will write the overflow data to the beginning of the + * current page as opposed to the subsequent page. + */ + page_offset = (to & (STM_PAGE_SIZE - 1)) + xact_len; + + if (page_offset > STM_PAGE_SIZE) { + xact_len -= (page_offset - STM_PAGE_SIZE); + } + + spin_lock(&spidata->mutex); + spiflash_sendcmd(SPI_WRITE_ENABLE); + + do { + schedule(); + reg = spiflash_regread32(SPI_FLASH_CTL); + } while (reg & SPI_CTL_BUSY); + + switch (xact_len) { + case 1: + spi_data = (u32) ((u8) *buf); + break; + case 2: + spi_data = (buf[1] << 8) | buf[0]; + break; + case 3: + spi_data = (buf[2] << 16) | (buf[1] << 8) | buf[0]; + break; + case 4: + spi_data = (buf[3] << 24) | (buf[2] << 16) | + (buf[1] << 8) | buf[0]; + break; + default: + printk("spiflash_write: default case\n"); + break; + } + + spiflash_regwrite32(SPI_FLASH_DATA, spi_data); + opcode = (opcode & SPI_OPCODE_MASK) | ((__u32)to << 8); + spiflash_regwrite32(SPI_FLASH_OPCODE, opcode); + + reg = (reg & ~SPI_CTL_TX_RX_CNT_MASK) | (xact_len + 4) | SPI_CTL_START; + spiflash_regwrite32(SPI_FLASH_CTL, reg); + finished = FALSE; + + do { + schedule(); + reg = spiflash_sendcmd(SPI_RD_STATUS); + if (!(reg & SPI_STATUS_WIP)) { + finished = TRUE; + } + } while (!finished); + spin_unlock(&spidata->mutex); + + bytes_left -= xact_len; + to += xact_len; + buf += xact_len; + + *retlen += xact_len; + + if (bytes_left == 0) { + done = TRUE; + } + } + + return (0); +} + +static void __init spidata_init(void) +{ + if (spidata) + return; + + spidata = kmalloc(sizeof(struct spiflash_data), GFP_KERNEL); + spin_lock_init(&spidata->mutex); + + if (!spidata) + return; + + spidata->spiflash_mmraddr = ioremap_nocache(SPI_FLASH_MMR, SPI_FLASH_MMR_SIZE); + + if (!spidata->spiflash_mmraddr) { + printk (KERN_WARNING "%s: Failed to map flash device\n", module_name); + kfree(spidata); + spidata = NULL; + } +} + +#ifdef CONFIG_MTD_PARTITIONS +static const char *part_probe_types[] = { "cmdlinepart", "RedBoot", NULL }; +#endif + +int __init +spiflash_init (void) +{ + int result = -1, i, j; + u32 len; + int index, num_parts; + struct mtd_info *mtd; + struct mtd_partition *mtd_parts; + char *buf; + struct mtd_partition *part; + struct squashfs_super_block *sb; + u32 config_start; + + spidata_init(); + + if (!spidata) + return (-ENXIO); + + mtd = kzalloc(sizeof(struct mtd_info), GFP_KERNEL); + if (!mtd) { + kfree(spidata); + return (-ENXIO); + } + + printk ("MTD driver for SPI flash.\n"); + printk ("%s: Probing for Serial flash ...\n", module_name); + if (!(index = spiflash_probe ())) { + printk (KERN_WARNING "%s: Found no serial flash device\n", module_name); + kfree(mtd); + kfree(spidata); + return (-ENXIO); + } + + printk ("%s: Found SPI serial Flash.\n", module_name); + + spidata->spiflash_readaddr = ioremap_nocache(SPI_FLASH_READ, flashconfig_tbl[index].byte_cnt); + if (!spidata->spiflash_readaddr) { + printk (KERN_WARNING "%s: Failed to map flash device\n", module_name); + kfree(mtd); + kfree(spidata); + return (-ENXIO); + } + + mtd->name = module_name; + mtd->type = MTD_NORFLASH; + mtd->flags = (MTD_CAP_NORFLASH|MTD_WRITEABLE); + mtd->size = flashconfig_tbl[index].byte_cnt; + mtd->erasesize = flashconfig_tbl[index].sector_size; + mtd->writesize = 1; + mtd->numeraseregions = 0; + mtd->eraseregions = NULL; + mtd->erase = spiflash_erase; + mtd->read = spiflash_read; + mtd->write = spiflash_write; + mtd->owner = THIS_MODULE; + +#ifdef SPIFLASH_DEBUG + printk (KERN_DEBUG + "mtd->name = %s\n" + "mtd->size = 0x%.8x (%uM)\n" + "mtd->erasesize = 0x%.8x (%uK)\n" + "mtd->numeraseregions = %d\n", + mtd->name, + mtd->size, mtd->size / (1024*1024), + mtd->erasesize, mtd->erasesize / 1024, + mtd->numeraseregions); + + if (mtd->numeraseregions) { + for (result = 0; result < mtd->numeraseregions; result++) { + printk (KERN_DEBUG + "\n\n" + "mtd->eraseregions[%d].offset = 0x%.8x\n" + "mtd->eraseregions[%d].erasesize = 0x%.8x (%uK)\n" + "mtd->eraseregions[%d].numblocks = %d\n", + result,mtd->eraseregions[result].offset, + result,mtd->eraseregions[result].erasesize,mtd->eraseregions[result].erasesize / 1024, + result,mtd->eraseregions[result].numblocks); + } + } +#endif + + /* parse redboot partitions */ + num_parts = parse_mtd_partitions(mtd, part_probe_types, &spidata->parsed_parts, 0); + + mtd_parts = kzalloc(sizeof(struct mtd_partition) * MAX_PARTS, GFP_KERNEL); + buf = kmalloc(mtd->erasesize, GFP_KERNEL); + sb = (struct squashfs_super_block *) buf; + for (i = j = 0; i < num_parts; i++, j++) { + part = &mtd_parts[j]; + memcpy(part, &spidata->parsed_parts[i], sizeof(struct mtd_partition)); + + if (!strcmp(part->name, ROOTFS_NAME)) { + /* create the root device */ + ROOT_DEV = MKDEV(MTD_BLOCK_MAJOR, i); + + part->size -= mtd->erasesize; + config_start = part->offset + part->size; + + while ((mtd->read(mtd, part->offset, mtd->erasesize, &len, buf) == 0) && + (len == mtd->erasesize) && + (*((u32 *) buf) == SQUASHFS_MAGIC) && + (sb->bytes_used > 0)) { + + /* this is squashfs, allocate another partition starting from the end of filesystem data */ + memcpy(&mtd_parts[j + 1], part, sizeof(struct mtd_partition)); + + len = (u32) sb->bytes_used; + len += (part->offset & 0x000fffff); + len += (mtd->erasesize - 1); + len &= ~(mtd->erasesize - 1); + len -= (part->offset & 0x000fffff); + + if (len + mtd->erasesize > part->size) + break; + + part = &mtd_parts[++j]; + + part->offset += len; + part->size -= len; + + part->name = kmalloc(10, GFP_KERNEL); + sprintf(part->name, "rootfs%d", j - i); + } + } + if (!strcmp(part->name, "RedBoot config")) { + /* add anoterh partition for the board config data */ + memcpy(&mtd_parts[j + 1], part, sizeof(struct mtd_partition)); + j++; + part = &mtd_parts[j]; + part->offset += part->size; + part->size = mtd->erasesize; + + part->name = kmalloc(16, GFP_KERNEL); + sprintf(part->name, "board_config"); + } + } + num_parts += j - i; + kfree(buf); + +#ifdef SPIFLASH_DEBUG + printk (KERN_DEBUG "Found %d redboot partitions\n", num_parts); +#endif + if (num_parts) { + result = add_mtd_partitions(mtd, mtd_parts, num_parts); + } else { +#ifdef SPIFLASH_DEBUG + printk (KERN_DEBUG "Did not find any redboot partitions\n"); +#endif + kfree(mtd); + kfree(spidata); + return (-ENXIO); + } + + spidata->mtd = mtd; + + return (result); +} + +void __exit +spiflash_exit (void) +{ + if (spidata && spidata->parsed_parts) { + del_mtd_partitions (spidata->mtd); + kfree(spidata->mtd); + kfree(spidata); + } +} + +module_init (spiflash_init); +module_exit (spiflash_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Atheros Communications Inc"); +MODULE_DESCRIPTION("MTD driver for SPI Flash on Atheros SOC"); + diff -urN linux.old/drivers/mtd/devices/spiflash.h linux.dev/drivers/mtd/devices/spiflash.h --- linux.old/drivers/mtd/devices/spiflash.h 1970-01-01 01:00:00.000000000 +0100 +++ linux.dev/drivers/mtd/devices/spiflash.h 2006-12-15 06:59:43.000000000 +0100 @@ -0,0 +1,124 @@ +/* + * SPI Flash Memory support header file. + * + * $Id: //depot/sw/releases/linuxsrc/src/kernels/mips-linux-2.4.25/drivers/mtd/devices/spiflash.h#3 $ + * + * + * Copyright (c) 2005, Atheros Communications Inc. + * Copyright (C) 2006 FON Technology, SL. + * Copyright (C) 2006 Imre Kaloz + * + * This code is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ +#define FLASH_1MB 1 +#define FLASH_2MB 2 +#define FLASH_4MB 3 +#define FLASH_8MB 4 +#define MAX_FLASH 5 + +#define STM_PAGE_SIZE 256 + +#define SPI_WRITE_ENABLE 0 +#define SPI_WRITE_DISABLE 1 +#define SPI_RD_STATUS 2 +#define SPI_WR_STATUS 3 +#define SPI_RD_DATA 4 +#define SPI_FAST_RD_DATA 5 +#define SPI_PAGE_PROGRAM 6 +#define SPI_SECTOR_ERASE 7 +#define SPI_BULK_ERASE 8 +#define SPI_DEEP_PWRDOWN 9 +#define SPI_RD_SIG 10 +#define SPI_MAX_OPCODES 11 + +#define SFI_WRITE_BUFFER_SIZE 4 +#define SFI_FLASH_ADDR_MASK 0x00ffffff + +#define STM_8MBIT_SIGNATURE 0x13 +#define STM_M25P80_BYTE_COUNT 1048576 +#define STM_M25P80_SECTOR_COUNT 16 +#define STM_M25P80_SECTOR_SIZE 0x10000 + +#define STM_16MBIT_SIGNATURE 0x14 +#define STM_M25P16_BYTE_COUNT 2097152 +#define STM_M25P16_SECTOR_COUNT 32 +#define STM_M25P16_SECTOR_SIZE 0x10000 + +#define STM_32MBIT_SIGNATURE 0x15 +#define STM_M25P32_BYTE_COUNT 4194304 +#define STM_M25P32_SECTOR_COUNT 64 +#define STM_M25P32_SECTOR_SIZE 0x10000 + +#define STM_64MBIT_SIGNATURE 0x16 +#define STM_M25P64_BYTE_COUNT 8388608 +#define STM_M25P64_SECTOR_COUNT 128 +#define STM_M25P64_SECTOR_SIZE 0x10000 + +#define STM_1MB_BYTE_COUNT STM_M25P80_BYTE_COUNT +#define STM_1MB_SECTOR_COUNT STM_M25P80_SECTOR_COUNT +#define STM_1MB_SECTOR_SIZE STM_M25P80_SECTOR_SIZE +#define STM_2MB_BYTE_COUNT STM_M25P16_BYTE_COUNT +#define STM_2MB_SECTOR_COUNT STM_M25P16_SECTOR_COUNT +#define STM_2MB_SECTOR_SIZE STM_M25P16_SECTOR_SIZE +#define STM_4MB_BYTE_COUNT STM_M25P32_BYTE_COUNT +#define STM_4MB_SECTOR_COUNT STM_M25P32_SECTOR_COUNT +#define STM_4MB_SECTOR_SIZE STM_M25P32_SECTOR_SIZE +#define STM_8MB_BYTE_COUNT STM_M25P64_BYTE_COUNT +#define STM_8MB_SECTOR_COUNT STM_M25P64_SECTOR_COUNT +#define STM_8MB_SECTOR_SIZE STM_M25P64_SECTOR_SIZE + +/* + * ST Microelectronics Opcodes for Serial Flash + */ + +#define STM_OP_WR_ENABLE 0x06 /* Write Enable */ +#define STM_OP_WR_DISABLE 0x04 /* Write Disable */ +#define STM_OP_RD_STATUS 0x05 /* Read Status */ +#define STM_OP_WR_STATUS 0x01 /* Write Status */ +#define STM_OP_RD_DATA 0x03 /* Read Data */ +#define STM_OP_FAST_RD_DATA 0x0b /* Fast Read Data */ +#define STM_OP_PAGE_PGRM 0x02 /* Page Program */ +#define STM_OP_SECTOR_ERASE 0xd8 /* Sector Erase */ +#define STM_OP_BULK_ERASE 0xc7 /* Bulk Erase */ +#define STM_OP_DEEP_PWRDOWN 0xb9 /* Deep Power-Down Mode */ +#define STM_OP_RD_SIG 0xab /* Read Electronic Signature */ + +#define STM_STATUS_WIP 0x01 /* Write-In-Progress */ +#define STM_STATUS_WEL 0x02 /* Write Enable Latch */ +#define STM_STATUS_BP0 0x04 /* Block Protect 0 */ +#define STM_STATUS_BP1 0x08 /* Block Protect 1 */ +#define STM_STATUS_BP2 0x10 /* Block Protect 2 */ +#define STM_STATUS_SRWD 0x80 /* Status Register Write Disable */ + +/* + * SPI Flash Interface Registers + */ +#define AR531XPLUS_SPI_READ 0x08000000 +#define AR531XPLUS_SPI_MMR 0x11300000 +#define AR531XPLUS_SPI_MMR_SIZE 12 + +#define AR531XPLUS_SPI_CTL 0x00 +#define AR531XPLUS_SPI_OPCODE 0x04 +#define AR531XPLUS_SPI_DATA 0x08 + +#define SPI_FLASH_READ AR531XPLUS_SPI_READ +#define SPI_FLASH_MMR AR531XPLUS_SPI_MMR +#define SPI_FLASH_MMR_SIZE AR531XPLUS_SPI_MMR_SIZE +#define SPI_FLASH_CTL AR531XPLUS_SPI_CTL +#define SPI_FLASH_OPCODE AR531XPLUS_SPI_OPCODE +#define SPI_FLASH_DATA AR531XPLUS_SPI_DATA + +#define SPI_CTL_START 0x00000100 +#define SPI_CTL_BUSY 0x00010000 +#define SPI_CTL_TXCNT_MASK 0x0000000f +#define SPI_CTL_RXCNT_MASK 0x000000f0 +#define SPI_CTL_TX_RX_CNT_MASK 0x000000ff +#define SPI_CTL_SIZE_MASK 0x00060000 + +#define SPI_CTL_CLK_SEL_MASK 0x03000000 +#define SPI_OPCODE_MASK 0x000000ff + +#define SPI_STATUS_WIP STM_STATUS_WIP