From: David Bauer Subject: [PATCH] ath79: allow to override AR8033 SGMII aneg status In order to make the QCA955x SGMII workaround work, the unsuccessful SGMII autonegotiation on the AR8033 should not block the PHY state-machine. Otherwise, the ag71xx driver never becomes aware of the copper-side link-establishment and the workaround is never executed. Submitted-by: David Bauer Submitted-by: Adrian Schmutzler --- drivers/net/phy/at803x.c-override.patch | 7 +++++++ 1 files changed, 7 insertions(+) --- a/drivers/net/phy/at803x.c +++ b/drivers/net/phy/at803x.c @@ -830,6 +830,13 @@ static int at803x_aneg_done(struct phy_d if (!(phy_read(phydev, AT803X_PSSR) & AT803X_PSSR_MR_AN_COMPLETE)) { phydev_warn(phydev, "803x_aneg_done: SGMII link is not ok\n"); aneg_done = 0; +#ifdef CONFIG_OF_MDIO + if (phydev->mdio.dev.of_node && + of_property_read_bool(phydev->mdio.dev.of_node, + "at803x-override-sgmii-link-check")) { + aneg_done = 1; + } +#endif } /* switch back to copper page */ phy_write(phydev, AT803X_REG_CHIP_CONFIG, ccr | AT803X_BT_BX_REG_SEL);