DEVICE_VARS += UBNT_BOARD UBNT_CHIP UBNT_TYPE UBNT_VERSION UBNT_REVISION # On M (XW) devices the U-Boot as of version 1.1.4-s1039 doesn't like # VERSION_DIST being on the place of major(?) version number, so we need to # use some number. UBNT_REVISION := $(VERSION_DIST)-$(REVISION) # mkubntimage is using the kernel image direct # routerboard creates partitions out of the ubnt header define Build/mkubntimage -$(STAGING_DIR_HOST)/bin/mkfwimage -B $(UBNT_BOARD) \ -v $(UBNT_TYPE).$(UBNT_CHIP).v6.0.0-$(VERSION_DIST)-$(REVISION) \ -k $(IMAGE_KERNEL) -r $@ -o $@ endef define Build/mkubntimage2 -$(STAGING_DIR_HOST)/bin/mkfwimage2 -f 0x9f000000 \ -v $(UBNT_TYPE).$(UBNT_CHIP).v6.0.0-$(VERSION_DIST)-$(REVISION) \ -p jffs2:0x50000:0xf60000:0:0:$@ \ -o $@.new @mv $@.new $@ endef # all UBNT XM/WA devices expect the kernel image to have 1024k while flash, when # booting the image, the size doesn't matter. define Build/mkubntimage-split -[ -f $@ ] && ( \ dd if=$@ of=$@.old1 bs=1024k count=1; \ dd if=$@ of=$@.old2 bs=1024k skip=1; \ $(STAGING_DIR_HOST)/bin/mkfwimage -B $(UBNT_BOARD) \ -v $(UBNT_TYPE).$(UBNT_CHIP).v$(UBNT_VERSION)-$(UBNT_REVISION) \ -k $@.old1 -r $@.old2 -o $@; \ rm $@.old1 $@.old2 ) endef # UBNT_BOARD e.g. one of (XS2, XS5, RS, XM) # UBNT_TYPE e.g. one of (BZ, XM, XW) # UBNT_CHIP e.g. one of (ar7240, ar933x, ar934x) # UBNT_VERSION e.g. one of (6.0.0, 8.5.3) define Device/ubnt DEVICE_VENDOR := Ubiquiti DEVICE_PACKAGES := kmod-usb2 IMAGES += factory.bin IMAGE/factory.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | \ append-rootfs | pad-rootfs | check-size | mkubntimage-split endef define Device/ubnt-bz $(Device/ubnt) SOC := ar7241 IMAGE_SIZE := 7448k UBNT_BOARD := XM UBNT_CHIP := ar7240 UBNT_TYPE := BZ UBNT_VERSION := 6.0.0 endef define Device/ubnt-sw $(Device/ubnt) SOC := ar7242 DEVICE_PACKAGES += kmod-usb-ohci IMAGE_SIZE := 7552k UBNT_BOARD := SW UBNT_CHIP := ar7240 UBNT_TYPE := SW UBNT_VERSION := 1.4.1 KERNEL := kernel-bin | append-dtb | relocate-kernel | lzma | uImage lzma endef define Device/ubnt-wa $(Device/ubnt) SOC := ar9342 IMAGE_SIZE := 15744k UBNT_BOARD := WA UBNT_CHIP := ar934x UBNT_TYPE := WA UBNT_VERSION := 8.5.3 endef define Device/ubnt-xc $(Device/ubnt) IMAGE_SIZE := 15744k UBNT_BOARD := XC UBNT_CHIP := qca955x UBNT_TYPE := XC UBNT_VERSION := 8.5.3 endef define Device/ubnt-xm $(Device/ubnt) DEVICE_VARIANT := XM DEVICE_PACKAGES += kmod-usb-ohci IMAGE_SIZE := 7448k UBNT_BOARD := XM UBNT_CHIP := ar7240 UBNT_TYPE := XM UBNT_VERSION := 6.0.0 KERNEL := kernel-bin | append-dtb | relocate-kernel | lzma | uImage lzma endef define Device/ubnt-xw $(Device/ubnt) SOC := ar9342 DEVICE_VARIANT := XW IMAGE_SIZE := 7552k UBNT_BOARD := XM UBNT_CHIP := ar934x UBNT_REVISION := 42.$(UBNT_REVISION) UBNT_TYPE := XW UBNT_VERSION := 6.0.4 endef define Device/ubnt_aircube-isp $(Device/ubnt) SOC := qca9533 DEVICE_MODEL := airCube ISP IMAGE_SIZE := 15744k UBNT_BOARD := ACB-ISP UBNT_CHIP := qca9533 UBNT_TYPE := ACB UBNT_VERSION := 2.5.0 SUPPORTED_DEVICES += ubnt,acb-isp endef TARGET_DEVICES += ubnt_aircube-isp define Device/ubnt_airrouter $(Device/ubnt-xm) SOC := ar7241 DEVICE_MODEL := AirRouter SUPPORTED_DEVICES += airrouter endef TARGET_DEVICES += ubnt_airrouter define Device/ubnt_bullet-m-ar7240 $(Device/ubnt-xm) SOC := ar7240 DEVICE_MODEL := Bullet M DEVICE_VARIANT := XM (AR7240) DEVICE_PACKAGES += rssileds SUPPORTED_DEVICES += bullet-m endef TARGET_DEVICES += ubnt_bullet-m-ar7240 define Device/ubnt_bullet-m-ar7241 $(Device/ubnt-xm) SOC := ar7241 DEVICE_MODEL := Bullet M DEVICE_VARIANT := XM (AR7241) DEVICE_PACKAGES += rssileds SUPPORTED_DEVICES += bullet-m ubnt,bullet-m endef TARGET_DEVICES += ubnt_bullet-m-ar7241 define Device/ubnt_bullet-m-xw $(Device/ubnt-xw) DEVICE_MODEL := Bullet M DEVICE_PACKAGES += rssileds SUPPORTED_DEVICES += bullet-m-xw endef TARGET_DEVICES += ubnt_bullet-m-xw define Device/ubnt_edgeswitch-5xp $(Device/ubnt-sw) DEVICE_MODEL := EdgeSwitch 5XP endef TARGET_DEVICES += ubnt_edgeswitch-5xp define Device/ubnt_edgeswitch-8xp $(Device/ubnt-sw) DEVICE_MODEL := EdgeSwitch 8XP DEVICE_PACKAGES += kmod-switch-bcm53xx-mdio endef TARGET_DEVICES += ubnt_edgeswitch-8xp define Device/ubnt_lap-120 $(Device/ubnt-wa) DEVICE_MODEL := LiteAP ac (LAP-120) DEVICE_PACKAGES += kmod-ath10k-ct-smallbuffers ath10k-firmware-qca988x-ct endef TARGET_DEVICES += ubnt_lap-120 define Device/ubnt_litebeam-ac-gen2 $(Device/ubnt-wa) DEVICE_MODEL := LiteBeam AC DEVICE_VARIANT := Gen2 DEVICE_PACKAGES := kmod-ath10k-ct-smallbuffers ath10k-firmware-qca988x-ct endef TARGET_DEVICES += ubnt_litebeam-ac-gen2 define Device/ubnt_nanobeam-ac $(Device/ubnt-wa) DEVICE_MODEL := NanoBeam AC DEVICE_PACKAGES += kmod-ath10k-ct-smallbuffers ath10k-firmware-qca988x-ct rssileds endef TARGET_DEVICES += ubnt_nanobeam-ac define Device/ubnt_nanobridge-m $(Device/ubnt-xm) SOC := ar7241 DEVICE_MODEL := NanoBridge M DEVICE_PACKAGES += rssileds SUPPORTED_DEVICES += bullet-m endef TARGET_DEVICES += ubnt_nanobridge-m define Device/ubnt_nanostation-ac $(Device/ubnt-wa) DEVICE_MODEL := Nanostation AC DEVICE_PACKAGES += kmod-ath10k-ct-smallbuffers ath10k-firmware-qca988x-ct rssileds endef TARGET_DEVICES += ubnt_nanostation-ac define Device/ubnt_nanostation-ac-loco $(Device/ubnt-wa) DEVICE_MODEL := Nanostation AC loco DEVICE_PACKAGES += kmod-ath10k-ct-smallbuffers ath10k-firmware-qca988x-ct endef TARGET_DEVICES += ubnt_nanostation-ac-loco define Device/ubnt_nanostation-loco-m $(Device/ubnt-xm) SOC := ar7241 DEVICE_MODEL := Nanostation Loco M DEVICE_PACKAGES += rssileds SUPPORTED_DEVICES += bullet-m endef TARGET_DEVICES += ubnt_nanostation-loco-m define Device/ubnt_nanostation-loco-m-xw $(Device/ubnt-xw) DEVICE_MODEL := Nanostation Loco M DEVICE_PACKAGES += rssileds SUPPORTED_DEVICES += loco-m-xw endef TARGET_DEVICES += ubnt_nanostation-loco-m-xw define Device/ubnt_nanostation-m $(Device/ubnt-xm) SOC := ar7241 DEVICE_MODEL := Nanostation M DEVICE_PACKAGES += rssileds SUPPORTED_DEVICES += nanostation-m endef TARGET_DEVICES += ubnt_nanostation-m define Device/ubnt_nanostation-m-xw $(Device/ubnt-xw) DEVICE_MODEL := Nanostation M DEVICE_PACKAGES += rssileds SUPPORTED_DEVICES += nanostation-m-xw endef TARGET_DEVICES += ubnt_nanostation-m-xw define Device/ubnt_picostation-m $(Device/ubnt-xm) SOC := ar7241 DEVICE_MODEL := Picostation M DEVICE_PACKAGES += rssileds SUPPORTED_DEVICES += bullet-m endef TARGET_DEVICES += ubnt_picostation-m define Device/ubnt_powerbeam-5ac-500 $(Device/ubnt-xc) SOC := qca9558 DEVICE_MODEL := PowerBeam 5AC DEVICE_VARIANT := 500 DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca988x-ct endef TARGET_DEVICES += ubnt_powerbeam-5ac-500 define Device/ubnt_powerbeam-5ac-gen2 $(Device/ubnt-wa) DEVICE_MODEL := PowerBeam 5AC DEVICE_VARIANT := Gen2 DEVICE_PACKAGES := kmod-ath10k-ct-smallbuffers ath10k-firmware-qca988x-ct rssileds endef TARGET_DEVICES += ubnt_powerbeam-5ac-gen2 define Device/ubnt_powerbridge-m $(Device/ubnt-xm) SOC := ar7241 DEVICE_MODEL := PowerBridge M DEVICE_PACKAGES += rssileds SUPPORTED_DEVICES += bullet-m endef TARGET_DEVICES += ubnt_powerbridge-m define Device/ubnt_rocket-m $(Device/ubnt-xm) SOC := ar7241 DEVICE_MODEL := Rocket M DEVICE_PACKAGES += rssileds SUPPORTED_DEVICES += rocket-m endef TARGET_DEVICES += ubnt_rocket-m define Device/ubnt_routerstation_common DEVICE_PACKAGES := -kmod-ath9k -wpad-basic-wolfssl -uboot-envtools kmod-usb-ohci \ kmod-usb2 fconfig DEVICE_VENDOR := Ubiquiti SOC := ar7161 IMAGE_SIZE := 16128k IMAGES := factory.bin IMAGE/factory.bin := append-rootfs | pad-rootfs | mkubntimage | \ check-size KERNEL := kernel-bin | append-dtb | lzma | pad-to $$(BLOCKSIZE) KERNEL_INITRAMFS := kernel-bin | append-dtb endef define Device/ubnt_routerstation $(Device/ubnt_routerstation_common) DEVICE_MODEL := RouterStation UBNT_BOARD := RS UBNT_TYPE := RSx UBNT_CHIP := ar7100 DEVICE_PACKAGES += -swconfig SUPPORTED_DEVICES += routerstation endef TARGET_DEVICES += ubnt_routerstation define Device/ubnt_routerstation-pro $(Device/ubnt_routerstation_common) DEVICE_MODEL := RouterStation Pro UBNT_BOARD := RSPRO UBNT_TYPE := RSPRO UBNT_CHIP := ar7100pro SUPPORTED_DEVICES += routerstation-pro endef TARGET_DEVICES += ubnt_routerstation-pro define Device/ubnt_unifi $(Device/ubnt-bz) DEVICE_MODEL := UniFi SUPPORTED_DEVICES += unifi endef TARGET_DEVICES += ubnt_unifi define Device/ubnt_unifiac DEVICE_VENDOR := Ubiquiti SOC := qca9563 IMAGE_SIZE := 7744k DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca988x-ct endef define Device/ubnt_unifiac-lite $(Device/ubnt_unifiac) DEVICE_MODEL := UniFi AC Lite SUPPORTED_DEVICES += unifiac-lite endef TARGET_DEVICES += ubnt_unifiac-lite define Device/ubnt_unifiac-lr $(Device/ubnt_unifiac) DEVICE_MODEL := UniFi AC LR SUPPORTED_DEVICES += unifiac-lite ubnt,unifiac-lite endef TARGET_DEVICES += ubnt_unifiac-lr define Device/ubnt_unifiac-mesh $(Device/ubnt_unifiac) DEVICE_MODEL := UniFi AC Mesh SUPPORTED_DEVICES += unifiac-lite endef TARGET_DEVICES += ubnt_unifiac-mesh define Device/ubnt_unifiac-mesh-pro $(Device/ubnt_unifiac) DEVICE_MODEL := UniFi AC Mesh Pro SUPPORTED_DEVICES += unifiac-pro endef TARGET_DEVICES += ubnt_unifiac-mesh-pro define Device/ubnt_unifiac-pro $(Device/ubnt_unifiac) DEVICE_MODEL := UniFi AC Pro DEVICE_PACKAGES += kmod-usb2 SUPPORTED_DEVICES += unifiac-pro endef TARGET_DEVICES += ubnt_unifiac-pro define Device/ubnt_unifi-ap-pro SOC := ar9344 DEVICE_VENDOR := Ubiquiti DEVICE_MODEL := UniFi AP Pro UBNT_TYPE := BZ UBNT_CHIP := ar934x KERNEL_SIZE := 3072k IMAGE_SIZE := 15744k KERNEL := kernel-bin | append-dtb | lzma | uImage lzma | jffs2 kernel0 IMAGES := sysupgrade.bin factory.bin IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-rootfs |\ pad-rootfs | append-metadata | check-size IMAGE/factory.bin := $$(IMAGE/sysupgrade.bin) | mkubntimage2 SUPPORTED_DEVICES += uap-pro endef TARGET_DEVICES += ubnt_unifi-ap-pro