// SPDX-License-Identifier: GPL-2.0-or-later OR MIT

#include "qca956x.dtsi"

#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>

/ {
	model = "COMFAST CF-E375AC";
	compatible = "comfast,cf-e375ac", "qca,qca9563";

	aliases {
		label-mac-device = &eth0;
		led-boot = &led_lan;
		led-failsafe = &led_lan;
		led-running = &led_lan;
		led-upgrade = &led_lan;
	};

	leds {
		compatible = "gpio-leds";

		led_lan: lan {
			label = "green:lan";
			gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
		};

		wan {
			label = "red:wan";
			gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
		};

		wlan2g {
			label = "blue:wlan2g";
			gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
			linux,default-trigger = "phy1tpt";
		};
	};

	keys {
		compatible = "gpio-keys";

		reset {
			linux,code = <KEY_RESTART>;
			gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
			debounce-interval = <60>;
		};
	};

	watchdog {
		compatible = "linux,wdt-gpio";

		gpios = <&gpio 6 GPIO_ACTIVE_HIGH>;
		hw_algo = "toggle";
		hw_margin_ms = <500>;
		always-running;
	};
};

&pcie {
	status = "okay";
};

&spi {
	status = "okay";

	flash@0 {
		compatible = "jedec,spi-nor";
		reg = <0>;
		spi-max-frequency = <25000000>;

		partitions {
			compatible = "fixed-partitions";
			#address-cells = <1>;
			#size-cells = <1>;

			partition@0 {
				label = "u-boot";
				reg = <0x000000 0x040000>;
				read-only;
			};

			art: partition@40000 {
				label = "art";
				reg = <0x040000 0x010000>;
				read-only;
			};

			partition@50000 {
				compatible = "denx,uimage";
				label = "firmware";
				reg = <0x050000 0xfa0000>;
			};

			partition@ff0000 {
				label = "art-backup";
				reg = <0xff0000 0x010000>;
				read-only;
			};
		};
	};
};

&mdio0 {
	status = "okay";

	phy-mask = <0>;

	phy0: ethernet-phy@0 {
		reg = <0>;
		phy-mode = "sgmii";
		qca,mib-poll-interval = <500>;

		qca,ar8327-initvals = <
			0x04 0x00080080 /* PORT0 PAD MODE CTRL */
			0x7c 0x0000007e /* PORT0_STATUS */
		>;
	};
};

&eth0 {
	status = "okay";

	pll-data = <0x03000101 0x00000101 0x00001919>;

	phy-mode = "sgmii";
	mtd-mac-address = <&art 0x0>;
	phy-handle = <&phy0>;
};

&wmac {
	status = "okay";

	mtd-cal-data = <&art 0x1000>;
	mtd-mac-address = <&art 0x0>;
	mtd-mac-address-increment = <10>;
};