// SPDX-License-Identifier: GPL-2.0-or-later OR MIT #include "ar7242.dtsi" #include #include #include / { compatible = "engenius,eap350-v1", "qca,ar7242"; model = "EnGenius EAP350 v1"; aliases { label-mac-device = ð0; led-boot = &led_power; led-failsafe = &led_power; led-running = &led_power; led-upgrade = &led_power; }; keys { compatible = "gpio-keys"; reset { label = "reset"; gpios = <&gpio 0 GPIO_ACTIVE_LOW>; debounce-interval = <60>; linux,code = ; }; }; leds { compatible = "gpio-leds"; led_power: power { label = "blue:power"; gpios = <&gpio 17 GPIO_ACTIVE_HIGH>; default-state = "on"; }; }; ath9k-leds { compatible = "gpio-leds"; wlan { label = "blue:wlan"; gpios = <&ath9k 1 GPIO_ACTIVE_LOW>; linux,default-trigger = "phy0tpt"; }; }; virtual_flash { compatible = "mtd-concat"; devices = <&fwconcat0 &fwconcat1>; partitions { compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; partition@0 { compatible = "openwrt,uimage", "denx,uimage"; openwrt,ih-magic = ; label = "firmware"; reg = <0x0 0x0>; }; }; }; }; &uart { status = "okay"; }; &spi { status = "okay"; flash@0 { compatible = "jedec,spi-nor"; reg = <0>; spi-max-frequency = <20000000>; partitions { compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; partition@0 { label = "u-boot"; reg = <0x0 0x40000>; read-only; }; partition@40000 { label = "u-boot-env"; reg = <0x40000 0x10000>; }; partition@50000 { label = "custom"; reg = <0x50000 0x50000>; read-only; }; partition@a0000 { label = "loader"; reg = <0xa0000 0x10000>; read-only; }; fwconcat1: partition@b0000 { label = "fwconcat1"; reg = <0xb0000 0xf0000>; }; partition@1a0000 { label = "fakeroot"; reg = <0x1a0000 0x10000>; read-only; }; fwconcat0: partition@1b0000 { label = "fwconcat0"; reg = <0x1b0000 0x4c0000>; }; partition@670000 { label = "failsafe"; reg = <0x670000 0x180000>; read-only; }; art: partition@7f0000 { label = "art"; reg = <0x7f0000 0x10000>; read-only; }; }; }; }; &mdio0 { status = "okay"; phy4: ethernet-phy@4 { reg = <4>; eee-broken-100tx; eee-broken-1000t; }; }; ð0 { status = "okay"; mtd-mac-address = <&art 0x0>; phy-handle = <&phy4>; phy-mode = "rgmii-id"; pll-data = <0x02000000 0x00000101 0x00001313>; }; &pcie { status = "okay"; ath9k: wifi@0,0,0 { compatible = "pci168c,002a"; reg = <0x0 0 0 0 0>; mtd-mac-address = <&art 0x0>; mtd-mac-address-increment = <1>; qca,no-eeprom; #gpio-cells = <2>; gpio-controller; }; };