// SPDX-License-Identifier: GPL-2.0-or-later OR MIT #include "ar7100.dtsi" #include #include / { compatible = "trendnet,tew-673gru", "qca,ar7161"; model = "TRENDNET TEW-673GRU"; aliases { led-boot = &led_wps; led-failsafe = &led_wps; led-running = &led_wps; led-upgrade = &led_wps; }; leds { compatible = "gpio-leds"; led_wps: wps { label = "blue:wps"; gpios = <&gpio 9 GPIO_ACTIVE_LOW>; }; }; keys { compatible = "gpio-keys"; reset { label = "reset"; linux,code = ; gpios = <&gpio 3 GPIO_ACTIVE_LOW>; }; wps { label = "wps"; linux,code = ; gpios = <&gpio 8 GPIO_ACTIVE_LOW>; }; }; rtl8366s { compatible = "realtek,rtl8366s"; gpio-sda = <&gpio 5 GPIO_ACTIVE_HIGH>; gpio-sck = <&gpio 7 GPIO_ACTIVE_HIGH>; realtek,initvals = <0x06 0x0108>; mdio-bus { #address-cells = <1>; #size-cells = <0>; status = "okay"; phy4: ethernet-phy@4 { reg = <4>; phy-mode = "rgmii"; }; }; }; virtual_flash { compatible = "mtd-concat"; devices = <&fwconcat0 &fwconcat1>; partitions { compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; partition@0 { compatible = "denx,uimage"; label = "firmware"; reg = <0x0 0x0>; }; }; }; }; &usb1 { status = "okay"; }; &usb2 { status = "okay"; }; &usb_phy { status = "okay"; }; &pcie0 { status = "okay"; wifi@0,11 { compatible = "pci168c,0029"; reg = <0x8800 0 0 0 0>; qca,no-eeprom; }; wifi@0,12 { compatible = "pci168c,0029"; reg = <0x9000 0 0 0 0>; qca,no-eeprom; }; }; &spi { status = "okay"; flash@0 { compatible = "jedec,spi-nor"; reg = <0>; spi-max-frequency = <25000000>; partitions { compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; partition@0 { label = "u-boot"; reg = <0x000000 0x040000>; read-only; }; partition@40000 { label = "config"; reg = <0x040000 0x010000>; read-only; }; fwconcat0: partition@50000 { label = "fwconcat0"; reg = <0x050000 0x610000>; }; partition@660000 { label = "caldata"; reg = <0x660000 0x010000>; read-only; }; fwconcat1: partition@670000 { label = "fwconcat1"; reg = <0x670000 0x190000>; }; }; }; }; ð0 { status = "okay"; pll-data = <0x11110000 0x00001099 0x00991099>; fixed-link { speed = <1000>; full-duplex; }; }; ð1 { status = "okay"; pll-data = <0x11110000 0x00001099 0x00991099>; phy-handle = <&phy4>; };