From 98d2c4ca97dde30616fa78ad5677825b1966cec6 Mon Sep 17 00:00:00 2001 From: Claudiu Beznea Date: Wed, 15 Sep 2021 10:48:35 +0300 Subject: [PATCH 232/247] ARM: dts: at91: sama7g5ek: use proper slew-rate settings for GMACs Datasheet chapter "EMAC Timings" specifies that while in 3.3V domain GMAC's MDIO pins should be configured with slew-rate enabled, while the data + signaling pins should be configured with slew-rate disabled when GMAC works in RGMII or RMII modes. The pin controller for SAMA7G5 sets the slew-rate as enabled for all pins. Adapt the device tree to comply with these. Fixes: 7540629e2fc7 ("ARM: dts: at91: add sama7g5 SoC DT and sama7g5-ek") Signed-off-by: Claudiu Beznea Signed-off-by: Nicolas Ferre Link: https://lore.kernel.org/r/20210915074836.6574-2-claudiu.beznea@microchip.com --- arch/arm/boot/dts/at91-sama7g5ek.dts | 28 ++++++++++++++++++++++------ 1 file changed, 22 insertions(+), 6 deletions(-) --- a/arch/arm/boot/dts/at91-sama7g5ek.dts +++ b/arch/arm/boot/dts/at91-sama7g5ek.dts @@ -355,7 +355,10 @@ #address-cells = <1>; #size-cells = <0>; pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_gmac0_default &pinctrl_gmac0_txck_default &pinctrl_gmac0_phy_irq>; + pinctrl-0 = <&pinctrl_gmac0_default + &pinctrl_gmac0_mdio_default + &pinctrl_gmac0_txck_default + &pinctrl_gmac0_phy_irq>; phy-mode = "rgmii-id"; status = "okay"; @@ -370,7 +373,9 @@ #address-cells = <1>; #size-cells = <0>; pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_gmac1_default &pinctrl_gmac1_phy_irq>; + pinctrl-0 = <&pinctrl_gmac1_default + &pinctrl_gmac1_mdio_default + &pinctrl_gmac1_phy_irq>; phy-mode = "rmii"; status = "okay"; @@ -425,14 +430,20 @@ , , , - , - , ; + slew-rate = <0>; + bias-disable; + }; + + pinctrl_gmac0_mdio_default: gmac0_mdio_default { + pinmux = , + ; bias-disable; }; pinctrl_gmac0_txck_default: gmac0_txck_default { pinmux = ; + slew-rate = <0>; bias-pull-up; }; @@ -449,8 +460,13 @@ , , , - , - , + ; + slew-rate = <0>; + bias-disable; + }; + + pinctrl_gmac1_mdio_default: gmac1_mdio_default { + pinmux = , ; bias-disable; };