From 7cb1dad7a7dfe4cfe55ebe86930dd6aef0de66b4 Mon Sep 17 00:00:00 2001 From: Eugen Hristev Date: Fri, 13 Nov 2020 15:24:29 +0200 Subject: [PATCH 131/247] pinctrl: at91-pio4: add support for fewer lines on last PIO bank Some products, like sama7g5, do not have a full last bank of PIO lines. In this case for example, sama7g5 only has 8 lines for the PE bank. PA0-31, PB0-31, PC0-31, PD0-31, PE0-7, in total 136 lines. To cope with this situation, added a data attribute that is product dependent, to specify the number of lines of the last bank. In case this number is different from the macro ATMEL_PIO_NPINS_PER_BANK, adjust the total number of lines accordingly. This will avoid advertising 160 lines instead of the actual 136, as this product supports, and to avoid reading/writing to invalid register addresses. Signed-off-by: Eugen Hristev Acked-by: Ludovic Desroches Link: https://lore.kernel.org/r/20201113132429.420940-1-eugen.hristev@microchip.com Signed-off-by: Linus Walleij --- drivers/pinctrl/pinctrl-at91-pio4.c | 18 ++++++++++++++++-- 1 file changed, 16 insertions(+), 2 deletions(-) --- a/drivers/pinctrl/pinctrl-at91-pio4.c +++ b/drivers/pinctrl/pinctrl-at91-pio4.c @@ -71,8 +71,15 @@ /* Custom pinconf parameters */ #define ATMEL_PIN_CONFIG_DRIVE_STRENGTH (PIN_CONFIG_END + 1) +/** + * struct atmel_pioctrl_data - Atmel PIO controller (pinmux + gpio) data struct + * @nbanks: number of PIO banks + * @last_bank_count: number of lines in the last bank (can be less than + * the rest of the banks). + */ struct atmel_pioctrl_data { unsigned nbanks; + unsigned last_bank_count; }; struct atmel_group { @@ -980,11 +987,13 @@ static const struct dev_pm_ops atmel_pct * We can have up to 16 banks. */ static const struct atmel_pioctrl_data atmel_sama5d2_pioctrl_data = { - .nbanks = 4, + .nbanks = 4, + .last_bank_count = ATMEL_PIO_NPINS_PER_BANK, }; static const struct atmel_pioctrl_data microchip_sama7g5_pioctrl_data = { - .nbanks = 5, + .nbanks = 5, + .last_bank_count = 8, /* sama7g5 has only PE0 to PE7 */ }; static const struct of_device_id atmel_pctrl_of_match[] = { @@ -1025,6 +1034,11 @@ static int atmel_pinctrl_probe(struct pl atmel_pioctrl_data = match->data; atmel_pioctrl->nbanks = atmel_pioctrl_data->nbanks; atmel_pioctrl->npins = atmel_pioctrl->nbanks * ATMEL_PIO_NPINS_PER_BANK; + /* if last bank has limited number of pins, adjust accordingly */ + if (atmel_pioctrl_data->last_bank_count != ATMEL_PIO_NPINS_PER_BANK) { + atmel_pioctrl->npins -= ATMEL_PIO_NPINS_PER_BANK; + atmel_pioctrl->npins += atmel_pioctrl_data->last_bank_count; + } atmel_pioctrl->reg_base = devm_platform_ioremap_resource(pdev, 0); if (IS_ERR(atmel_pioctrl->reg_base))