From 2ff030d44672d745c5327b72463af43f5103e99b Mon Sep 17 00:00:00 2001 From: Gabor Juhos Date: Tue, 25 Mar 2014 17:07:46 +0100 Subject: [PATCH] watchdog: ath79-wdt: avoid spurious restarts on AR934x On some AR934x based systems, where the frequency of the AHB bus is relatively high, the built-in watchdog causes a spurious restart when it gets enabled. The possible cause of these restarts is that the timeout value written into the TIMER register does not reaches the hardware in time. Add an explicit delay into the ath79_wdt_enable function to avoid the spurious restarts. Signed-off-by: Gabor Juhos Cc: --- drivers/watchdog/ath79_wdt.c | 10 ++++++++++ 1 file changed, 10 insertions(+) --- a/drivers/watchdog/ath79_wdt.c +++ b/drivers/watchdog/ath79_wdt.c @@ -20,6 +20,7 @@ #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt #include +#include #include #include #include @@ -91,6 +92,15 @@ static inline void ath79_wdt_keepalive(v static inline void ath79_wdt_enable(void) { ath79_wdt_keepalive(); + + /* + * Updating the TIMER register requires a few microseconds + * on the AR934x SoCs at least. Use a small delay to ensure + * that the TIMER register is updated within the hardware + * before enabling the watchdog. + */ + udelay(2); + ath79_wdt_wr(WDOG_REG_CTRL, WDOG_CTRL_ACTION_FCR); /* flush write */ ath79_wdt_rr(WDOG_REG_CTRL);