define Build/create-uImage-dtb # flat_dt target expect FIT image - which WNDR4700's uboot doesn't support -$(STAGING_DIR_HOST)/bin/mkimage -A $(LINUX_KARCH) \ -O linux -T kernel -C none \ -n '$(call toupper,$(LINUX_KARCH)) $(VERSION_DIST) Linux-$(LINUX_VERSION)' \ -d "$@.dtb" "$@.dtb.uimage" endef define Build/MerakiAdd-dtb $(call Image/BuildDTB,../dts/$(DEVICE_DTS).dts,$@.dtb) ( \ dd if=$@.dtb bs=$(DTB_SIZE) conv=sync; \ cat $@ ; \ ) > $@.new @mv $@.new $@ endef define Build/MerakiNAND -$(STAGING_DIR_HOST)/bin/mkmerakifw \ -B $(BOARD_NAME) -s \ -i $@ \ -o $@.new @cp $@.new $@ endef define Device/meraki_mr24 DEVICE_VENDOR := Cisco Meraki DEVICE_MODEL := MR24 DEVICE_PACKAGES := kmod-spi-gpio -swconfig BOARD_NAME := mr24 IMAGES := sysupgrade.bin DTB_SIZE := 64512 IMAGE_SIZE := 8191k KERNEL := kernel-bin | lzma | uImage lzma | MerakiAdd-dtb | MerakiNAND KERNEL_INITRAMFS := kernel-bin | lzma | dtb | MuImage-initramfs lzma IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata UBINIZE_OPTS := -E 5 SUPPORTED_DEVICES += mr24 endef TARGET_DEVICES += meraki_mr24 define Device/meraki_mx60 DEVICE_VENDOR := Cisco Meraki DEVICE_MODEL := MX60/MX60W DEVICE_PACKAGES := kmod-spi-gpio kmod-usb-ledtrig-usbport kmod-usb-dwc2 \ kmod-usb-storage block-mount BLOCKSIZE := 128k IMAGES := sysupgrade.bin DTB_SIZE := 20480 IMAGE_SIZE := 1021m KERNEL := kernel-bin | gzip | dtb | MuImage-initramfs gzip IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata UBINIZE_OPTS := -E 5 DEVICE_COMPAT_VERSION := 2.0 DEVICE_COMPAT_MESSAGE := uboot's bootcmd has to be updated to support standard multi-image uImages. \ Upgrade via sysupgrade mechanism is not possible. endef TARGET_DEVICES += meraki_mx60 define Device/netgear_wndap6x0 DEVICE_VENDOR := NETGEAR DEVICE_PACKAGES := kmod-eeprom-at24 SUBPAGESIZE := 256 PAGESIZE := 512 BLOCKSIZE := 16k DTB_SIZE := 32768 IMAGE_SIZE := 27392k IMAGES := sysupgrade.bin factory.img KERNEL_SIZE := 6080k KERNEL := dtb | kernel-bin | gzip | MuImage-initramfs gzip IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata IMAGE/factory.img := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi UBINIZE_OPTS := -E 5 DEVICE_COMPAT_VERSION := 2.0 DEVICE_COMPAT_MESSAGE := kernel and ubi partitions had to be resized. \ Upgrade via sysupgrade mechanism is not possible. endef define Device/netgear_wndap620 $(Device/netgear_wndap6x0) DEVICE_MODEL := WNDAP620 (Premium Wireless-N) endef TARGET_DEVICES += netgear_wndap620 define Device/netgear_wndap660 $(Device/netgear_wndap6x0) DEVICE_MODEL := WNDAP660 (Dual Radio Dual Band Wireless-N) endef TARGET_DEVICES += netgear_wndap660 define Device/netgear_wndr4700 DEVICE_VENDOR := NETGEAR DEVICE_MODEL := Centria N900 WNDR4700/WNDR4720 DEVICE_PACKAGES := badblocks block-mount e2fsprogs kmod-hwmon-drivetemp \ kmod-dm kmod-fs-ext4 kmod-fs-vfat kmod-usb-ledtrig-usbport \ kmod-md-mod kmod-nls-cp437 kmod-nls-iso8859-1 kmod-nls-iso8859-15 \ kmod-nls-utf8 kmod-usb3 kmod-usb-dwc2 kmod-usb-storage \ partx-utils BOARD_NAME := wndr4700 PAGESIZE := 2048 SUBPAGESIZE := 512 BLOCKSIZE := 128k DTB_SIZE := 131008 IMAGE_SIZE := 24960k IMAGES := factory.img sysupgrade.bin ARTIFACTS := device-tree.dtb KERNEL_SIZE := 3584k # append a fake/empty rootfs to fool netgear's uboot # CHECK_DNI_FIRMWARE_ROOTFS_INTEGRITY in do_chk_dniimg() KERNEL := kernel-bin | lzma -d16 | uImage lzma | pad-offset $$(BLOCKSIZE) 64 | \ append-uImage-fakehdr filesystem | dtb | create-uImage-dtb | prepend-dtb KERNEL_INITRAMFS := kernel-bin | gzip | dtb | MuImage-initramfs gzip IMAGE/factory.img := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | \ netgear-dni | check-size IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata ARTIFACT/device-tree.dtb := export-dtb | uImage none NETGEAR_BOARD_ID := WNDR4700 NETGEAR_HW_ID := 29763875+128+256 UBINIZE_OPTS := -E 5 SUPPORTED_DEVICES += wndr4700 endef TARGET_DEVICES += netgear_wndr4700