diff --git a/nl80211.h b/nl80211.h index c587a61..255a971 100644 --- a/nl80211.h +++ b/nl80211.h @@ -11,6 +11,7 @@ * Copyright 2008 Jouni Malinen * Copyright 2008 Colin McCabe * Copyright 2015-2017 Intel Deutschland GmbH + * Copyright (C) 2018 Intel Corporation * * Permission to use, copy, modify, and/or distribute this software for any * purpose with or without fee is hereby granted, provided that the above @@ -203,7 +204,8 @@ * FILS shared key authentication offload should be able to construct the * authentication and association frames for FILS shared key authentication and * eventually do a key derivation as per IEEE 802.11ai. The below additional - * parameters should be given to driver in %NL80211_CMD_CONNECT. + * parameters should be given to driver in %NL80211_CMD_CONNECT and/or in + * %NL80211_CMD_UPDATE_CONNECT_PARAMS. * %NL80211_ATTR_FILS_ERP_USERNAME - used to construct keyname_nai * %NL80211_ATTR_FILS_ERP_REALM - used to construct keyname_nai * %NL80211_ATTR_FILS_ERP_NEXT_SEQ_NUM - used to construct erp message @@ -214,7 +216,8 @@ * as specified in IETF RFC 6696. * * When FILS shared key authentication is completed, driver needs to provide the - * below additional parameters to userspace. + * below additional parameters to userspace, which can be either after setting + * up a connection or after roaming. * %NL80211_ATTR_FILS_KEK - used for key renewal * %NL80211_ATTR_FILS_ERP_NEXT_SEQ_NUM - used in further EAP-RP exchanges * %NL80211_ATTR_PMKID - used to identify the PMKSA used/generated @@ -542,7 +545,8 @@ * IEs in %NL80211_ATTR_IE, %NL80211_ATTR_AUTH_TYPE, %NL80211_ATTR_USE_MFP, * %NL80211_ATTR_MAC, %NL80211_ATTR_WIPHY_FREQ, %NL80211_ATTR_CONTROL_PORT, * %NL80211_ATTR_CONTROL_PORT_ETHERTYPE, - * %NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT, %NL80211_ATTR_MAC_HINT, and + * %NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT, + * %NL80211_ATTR_CONTROL_PORT_OVER_NL80211, %NL80211_ATTR_MAC_HINT, and * %NL80211_ATTR_WIPHY_FREQ_HINT. * If included, %NL80211_ATTR_MAC and %NL80211_ATTR_WIPHY_FREQ are * restrictions on BSS selection, i.e., they effectively prevent roaming @@ -977,21 +981,58 @@ * only the %NL80211_ATTR_IE data is used and updated with this command. * * @NL80211_CMD_SET_PMK: For offloaded 4-Way handshake, set the PMK or PMK-R0 - * for the given authenticator address (specified with &NL80211_ATTR_MAC). - * When &NL80211_ATTR_PMKR0_NAME is set, &NL80211_ATTR_PMK specifies the + * for the given authenticator address (specified with %NL80211_ATTR_MAC). + * When %NL80211_ATTR_PMKR0_NAME is set, %NL80211_ATTR_PMK specifies the * PMK-R0, otherwise it specifies the PMK. * @NL80211_CMD_DEL_PMK: For offloaded 4-Way handshake, delete the previously * configured PMK for the authenticator address identified by - * &NL80211_ATTR_MAC. + * %NL80211_ATTR_MAC. * @NL80211_CMD_PORT_AUTHORIZED: An event that indicates that the 4 way * handshake was completed successfully by the driver. The BSSID is - * specified with &NL80211_ATTR_MAC. Drivers that support 4 way handshake + * specified with %NL80211_ATTR_MAC. Drivers that support 4 way handshake * offload should send this event after indicating 802.11 association with - * &NL80211_CMD_CONNECT or &NL80211_CMD_ROAM. If the 4 way handshake failed - * &NL80211_CMD_DISCONNECT should be indicated instead. + * %NL80211_CMD_CONNECT or %NL80211_CMD_ROAM. If the 4 way handshake failed + * %NL80211_CMD_DISCONNECT should be indicated instead. + * + * @NL80211_CMD_CONTROL_PORT_FRAME: Control Port (e.g. PAE) frame TX request + * and RX notification. This command is used both as a request to transmit + * a control port frame and as a notification that a control port frame + * has been received. %NL80211_ATTR_FRAME is used to specify the + * frame contents. The frame is the raw EAPoL data, without ethernet or + * 802.11 headers. + * When used as an event indication %NL80211_ATTR_CONTROL_PORT_ETHERTYPE, + * %NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT and %NL80211_ATTR_MAC are added + * indicating the protocol type of the received frame; whether the frame + * was received unencrypted and the MAC address of the peer respectively. * * @NL80211_CMD_RELOAD_REGDB: Request that the regdb firmware file is reloaded. * + * @NL80211_CMD_EXTERNAL_AUTH: This interface is exclusively defined for host + * drivers that do not define separate commands for authentication and + * association, but rely on user space for the authentication to happen. + * This interface acts both as the event request (driver to user space) + * to trigger the authentication and command response (userspace to + * driver) to indicate the authentication status. + * + * User space uses the %NL80211_CMD_CONNECT command to the host driver to + * trigger a connection. The host driver selects a BSS and further uses + * this interface to offload only the authentication part to the user + * space. Authentication frames are passed between the driver and user + * space through the %NL80211_CMD_FRAME interface. Host driver proceeds + * further with the association after getting successful authentication + * status. User space indicates the authentication status through + * %NL80211_ATTR_STATUS_CODE attribute in %NL80211_CMD_EXTERNAL_AUTH + * command interface. + * + * Host driver reports this status on an authentication failure to the + * user space through the connect result as the user space would have + * initiated the connection through the connect request. + * + * @NL80211_CMD_STA_OPMODE_CHANGED: An event that notify station's + * ht opmode or vht opmode changes using any of %NL80211_ATTR_SMPS_MODE, + * %NL80211_ATTR_CHANNEL_WIDTH,%NL80211_ATTR_NSS attributes with its + * address(specified in %NL80211_ATTR_MAC). + * * @NL80211_CMD_MAX: highest used command number * @__NL80211_CMD_AFTER_LAST: internal use */ @@ -1198,6 +1239,12 @@ enum nl80211_commands { NL80211_CMD_RELOAD_REGDB, + NL80211_CMD_EXTERNAL_AUTH, + + NL80211_CMD_STA_OPMODE_CHANGED, + + NL80211_CMD_CONTROL_PORT_FRAME, + /* add new commands above here */ /* used to define NL80211_CMD_MAX below */ @@ -1445,6 +1492,15 @@ enum nl80211_commands { * @NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT: When included along with * %NL80211_ATTR_CONTROL_PORT_ETHERTYPE, indicates that the custom * ethertype frames used for key negotiation must not be encrypted. + * @NL80211_ATTR_CONTROL_PORT_OVER_NL80211: A flag indicating whether control + * port frames (e.g. of type given in %NL80211_ATTR_CONTROL_PORT_ETHERTYPE) + * will be sent directly to the network interface or sent via the NL80211 + * socket. If this attribute is missing, then legacy behavior of sending + * control port frames directly to the network interface is used. If the + * flag is included, then control port frames are sent over NL80211 instead + * using %CMD_CONTROL_PORT_FRAME. If control port routing over NL80211 is + * to be used then userspace must also use the %NL80211_ATTR_SOCKET_OWNER + * flag. * * @NL80211_ATTR_TESTDATA: Testmode data blob, passed through to the driver. * We recommend using nested, driver-specific attributes within this. @@ -1932,6 +1988,12 @@ enum nl80211_commands { * multicast group. * If set during %NL80211_CMD_ASSOCIATE or %NL80211_CMD_CONNECT the * station will deauthenticate when the socket is closed. + * If set during %NL80211_CMD_JOIN_IBSS the IBSS will be automatically + * torn down when the socket is closed. + * If set during %NL80211_CMD_JOIN_MESH the mesh setup will be + * automatically torn down when the socket is closed. + * If set during %NL80211_CMD_START_AP the AP will be automatically + * disabled when the socket is closed. * * @NL80211_ATTR_TDLS_INITIATOR: flag attribute indicating the current end is * the TDLS link initiator. @@ -2153,6 +2215,35 @@ enum nl80211_commands { * @NL80211_ATTR_PMKR0_NAME: PMK-R0 Name for offloaded FT. * @NL80211_ATTR_PORT_AUTHORIZED: (reserved) * + * @NL80211_ATTR_EXTERNAL_AUTH_ACTION: Identify the requested external + * authentication operation (u32 attribute with an + * &enum nl80211_external_auth_action value). This is used with the + * %NL80211_CMD_EXTERNAL_AUTH request event. + * @NL80211_ATTR_EXTERNAL_AUTH_SUPPORT: Flag attribute indicating that the user + * space supports external authentication. This attribute shall be used + * only with %NL80211_CMD_CONNECT request. The driver may offload + * authentication processing to user space if this capability is indicated + * in NL80211_CMD_CONNECT requests from the user space. + * + * @NL80211_ATTR_NSS: Station's New/updated RX_NSS value notified using this + * u8 attribute. This is used with %NL80211_CMD_STA_OPMODE_CHANGED. + * + * @NL80211_ATTR_TXQ_STATS: TXQ statistics (nested attribute, see &enum + * nl80211_txq_stats) + * @NL80211_ATTR_TXQ_LIMIT: Total packet limit for the TXQ queues for this phy. + * The smaller of this and the memory limit is enforced. + * @NL80211_ATTR_TXQ_MEMORY_LIMIT: Total memory memory limit (in bytes) for the + * TXQ queues for this phy. The smaller of this and the packet limit is + * enforced. + * @NL80211_ATTR_TXQ_QUANTUM: TXQ scheduler quantum (bytes). Number of bytes + * a flow is assigned on each round of the DRR scheduler. + * @NL80211_ATTR_HE_CAPABILITY: HE Capability information element (from + * association request when used with NL80211_CMD_NEW_STATION). Can be set + * only if %NL80211_STA_FLAG_WME is set. + * + * @NL80211_ATTR_WIPHY_ANTENNA_GAIN: Configured antenna gain. Used to reduce + * transmit power to stay within regulatory limits. u32, dBi. + * * @NUM_NL80211_ATTR: total number of nl80211_attrs available * @NL80211_ATTR_MAX: highest attribute number currently defined * @__NL80211_ATTR_AFTER_LAST: internal use @@ -2579,6 +2670,23 @@ enum nl80211_attrs { NL80211_ATTR_PMKR0_NAME, NL80211_ATTR_PORT_AUTHORIZED, + NL80211_ATTR_EXTERNAL_AUTH_ACTION, + NL80211_ATTR_EXTERNAL_AUTH_SUPPORT, + + NL80211_ATTR_NSS, + NL80211_ATTR_ACK_SIGNAL, + + NL80211_ATTR_CONTROL_PORT_OVER_NL80211, + + NL80211_ATTR_TXQ_STATS, + NL80211_ATTR_TXQ_LIMIT, + NL80211_ATTR_TXQ_MEMORY_LIMIT, + NL80211_ATTR_TXQ_QUANTUM, + + NL80211_ATTR_HE_CAPABILITY, + + NL80211_ATTR_WIPHY_ANTENNA_GAIN, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, @@ -2618,6 +2726,8 @@ enum nl80211_attrs { #define NL80211_ATTR_KEYS NL80211_ATTR_KEYS #define NL80211_ATTR_FEATURE_FLAGS NL80211_ATTR_FEATURE_FLAGS +#define NL80211_WIPHY_NAME_MAXLEN 64 + #define NL80211_MAX_SUPP_RATES 32 #define NL80211_MAX_SUPP_HT_RATES 77 #define NL80211_MAX_SUPP_REG_RULES 64 @@ -2626,7 +2736,8 @@ enum nl80211_attrs { #define NL80211_TKIP_DATA_OFFSET_RX_MIC_KEY 24 #define NL80211_HT_CAPABILITY_LEN 26 #define NL80211_VHT_CAPABILITY_LEN 12 - +#define NL80211_HE_MIN_CAPABILITY_LEN 16 +#define NL80211_HE_MAX_CAPABILITY_LEN 51 #define NL80211_MAX_NR_CIPHER_SUITES 5 #define NL80211_MAX_NR_AKM_SUITES 2 @@ -2754,6 +2865,38 @@ struct nl80211_sta_flag_update { } __attribute__((packed)); /** + * enum nl80211_he_gi - HE guard interval + * @NL80211_RATE_INFO_HE_GI_0_8: 0.8 usec + * @NL80211_RATE_INFO_HE_GI_1_6: 1.6 usec + * @NL80211_RATE_INFO_HE_GI_3_2: 3.2 usec + */ +enum nl80211_he_gi { + NL80211_RATE_INFO_HE_GI_0_8, + NL80211_RATE_INFO_HE_GI_1_6, + NL80211_RATE_INFO_HE_GI_3_2, +}; + +/** + * enum nl80211_he_ru_alloc - HE RU allocation values + * @NL80211_RATE_INFO_HE_RU_ALLOC_26: 26-tone RU allocation + * @NL80211_RATE_INFO_HE_RU_ALLOC_52: 52-tone RU allocation + * @NL80211_RATE_INFO_HE_RU_ALLOC_106: 106-tone RU allocation + * @NL80211_RATE_INFO_HE_RU_ALLOC_242: 242-tone RU allocation + * @NL80211_RATE_INFO_HE_RU_ALLOC_484: 484-tone RU allocation + * @NL80211_RATE_INFO_HE_RU_ALLOC_996: 996-tone RU allocation + * @NL80211_RATE_INFO_HE_RU_ALLOC_2x996: 2x996-tone RU allocation + */ +enum nl80211_he_ru_alloc { + NL80211_RATE_INFO_HE_RU_ALLOC_26, + NL80211_RATE_INFO_HE_RU_ALLOC_52, + NL80211_RATE_INFO_HE_RU_ALLOC_106, + NL80211_RATE_INFO_HE_RU_ALLOC_242, + NL80211_RATE_INFO_HE_RU_ALLOC_484, + NL80211_RATE_INFO_HE_RU_ALLOC_996, + NL80211_RATE_INFO_HE_RU_ALLOC_2x996, +}; + +/** * enum nl80211_rate_info - bitrate information * * These attribute types are used with %NL80211_STA_INFO_TXRATE @@ -2785,6 +2928,13 @@ struct nl80211_sta_flag_update { * @NL80211_RATE_INFO_5_MHZ_WIDTH: 5 MHz width - note that this is * a legacy rate and will be reported as the actual bitrate, i.e. * a quarter of the base (20 MHz) rate + * @NL80211_RATE_INFO_HE_MCS: HE MCS index (u8, 0-11) + * @NL80211_RATE_INFO_HE_NSS: HE NSS value (u8, 1-8) + * @NL80211_RATE_INFO_HE_GI: HE guard interval identifier + * (u8, see &enum nl80211_he_gi) + * @NL80211_RATE_INFO_HE_DCM: HE DCM value (u8, 0/1) + * @NL80211_RATE_INFO_RU_ALLOC: HE RU allocation, if not present then + * non-OFDMA was used (u8, see &enum nl80211_he_ru_alloc) * @__NL80211_RATE_INFO_AFTER_LAST: internal use */ enum nl80211_rate_info { @@ -2801,6 +2951,11 @@ enum nl80211_rate_info { NL80211_RATE_INFO_160_MHZ_WIDTH, NL80211_RATE_INFO_10_MHZ_WIDTH, NL80211_RATE_INFO_5_MHZ_WIDTH, + NL80211_RATE_INFO_HE_MCS, + NL80211_RATE_INFO_HE_NSS, + NL80211_RATE_INFO_HE_GI, + NL80211_RATE_INFO_HE_DCM, + NL80211_RATE_INFO_HE_RU_ALLOC, /* keep last */ __NL80211_RATE_INFO_AFTER_LAST, @@ -2899,6 +3054,9 @@ enum nl80211_sta_bss_param { * @NL80211_STA_INFO_RX_DURATION: aggregate PPDU duration for all frames * received from the station (u64, usec) * @NL80211_STA_INFO_PAD: attribute used for padding for 64-bit alignment + * @NL80211_STA_INFO_ACK_SIGNAL: signal strength of the last ACK frame(u8, dBm) + * @NL80211_STA_INFO_DATA_ACK_SIGNAL_AVG: avg signal strength of (data) + * ACK frame (s8, dBm) * @__NL80211_STA_INFO_AFTER_LAST: internal * @NL80211_STA_INFO_MAX: highest possible station info attribute */ @@ -2937,6 +3095,8 @@ enum nl80211_sta_info { NL80211_STA_INFO_TID_STATS, NL80211_STA_INFO_RX_DURATION, NL80211_STA_INFO_PAD, + NL80211_STA_INFO_ACK_SIGNAL, + NL80211_STA_INFO_DATA_ACK_SIGNAL_AVG, /* keep last */ __NL80211_STA_INFO_AFTER_LAST, @@ -2954,6 +3114,7 @@ enum nl80211_sta_info { * @NL80211_TID_STATS_TX_MSDU_FAILED: number of failed transmitted * MSDUs (u64) * @NL80211_TID_STATS_PAD: attribute used for padding for 64-bit alignment + * @NL80211_TID_STATS_TXQ_STATS: TXQ stats (nested attribute) * @NUM_NL80211_TID_STATS: number of attributes here * @NL80211_TID_STATS_MAX: highest numbered attribute here */ @@ -2964,6 +3125,7 @@ enum nl80211_tid_stats { NL80211_TID_STATS_TX_MSDU_RETRIES, NL80211_TID_STATS_TX_MSDU_FAILED, NL80211_TID_STATS_PAD, + NL80211_TID_STATS_TXQ_STATS, /* keep last */ NUM_NL80211_TID_STATS, @@ -2971,6 +3133,44 @@ enum nl80211_tid_stats { }; /** + * enum nl80211_txq_stats - per TXQ statistics attributes + * @__NL80211_TXQ_STATS_INVALID: attribute number 0 is reserved + * @NUM_NL80211_TXQ_STATS: number of attributes here + * @NL80211_TXQ_STATS_BACKLOG_BYTES: number of bytes currently backlogged + * @NL80211_TXQ_STATS_BACKLOG_PACKETS: number of packets currently + * backlogged + * @NL80211_TXQ_STATS_FLOWS: total number of new flows seen + * @NL80211_TXQ_STATS_DROPS: total number of packet drops + * @NL80211_TXQ_STATS_ECN_MARKS: total number of packet ECN marks + * @NL80211_TXQ_STATS_OVERLIMIT: number of drops due to queue space overflow + * @NL80211_TXQ_STATS_OVERMEMORY: number of drops due to memory limit overflow + * (only for per-phy stats) + * @NL80211_TXQ_STATS_COLLISIONS: number of hash collisions + * @NL80211_TXQ_STATS_TX_BYTES: total number of bytes dequeued from TXQ + * @NL80211_TXQ_STATS_TX_PACKETS: total number of packets dequeued from TXQ + * @NL80211_TXQ_STATS_MAX_FLOWS: number of flow buckets for PHY + * @NL80211_TXQ_STATS_MAX: highest numbered attribute here + */ +enum nl80211_txq_stats { + __NL80211_TXQ_STATS_INVALID, + NL80211_TXQ_STATS_BACKLOG_BYTES, + NL80211_TXQ_STATS_BACKLOG_PACKETS, + NL80211_TXQ_STATS_FLOWS, + NL80211_TXQ_STATS_DROPS, + NL80211_TXQ_STATS_ECN_MARKS, + NL80211_TXQ_STATS_OVERLIMIT, + NL80211_TXQ_STATS_OVERMEMORY, + NL80211_TXQ_STATS_COLLISIONS, + NL80211_TXQ_STATS_TX_BYTES, + NL80211_TXQ_STATS_TX_PACKETS, + NL80211_TXQ_STATS_MAX_FLOWS, + + /* keep last */ + NUM_NL80211_TXQ_STATS, + NL80211_TXQ_STATS_MAX = NUM_NL80211_TXQ_STATS - 1 +}; + +/** * enum nl80211_mpath_flags - nl80211 mesh path flags * * @NL80211_MPATH_FLAG_ACTIVE: the mesh path is active @@ -3022,6 +3222,38 @@ enum nl80211_mpath_info { }; /** + * enum nl80211_band_iftype_attr - Interface type data attributes + * + * @__NL80211_BAND_IFTYPE_ATTR_INVALID: attribute number 0 is reserved + * @NL80211_BAND_IFTYPE_ATTR_IFTYPES: nested attribute containing a flag attribute + * for each interface type that supports the band data + * @NL80211_BAND_IFTYPE_ATTR_HE_CAP_MAC: HE MAC capabilities as in HE + * capabilities IE + * @NL80211_BAND_IFTYPE_ATTR_HE_CAP_PHY: HE PHY capabilities as in HE + * capabilities IE + * @NL80211_BAND_IFTYPE_ATTR_HE_CAP_MCS_SET: HE supported NSS/MCS as in HE + * capabilities IE + * @NL80211_BAND_IFTYPE_ATTR_HE_CAP_PPE: HE PPE thresholds information as + * defined in HE capabilities IE + * @NL80211_BAND_IFTYPE_ATTR_MAX: highest band HE capability attribute currently + * defined + * @__NL80211_BAND_IFTYPE_ATTR_AFTER_LAST: internal use + */ +enum nl80211_band_iftype_attr { + __NL80211_BAND_IFTYPE_ATTR_INVALID, + + NL80211_BAND_IFTYPE_ATTR_IFTYPES, + NL80211_BAND_IFTYPE_ATTR_HE_CAP_MAC, + NL80211_BAND_IFTYPE_ATTR_HE_CAP_PHY, + NL80211_BAND_IFTYPE_ATTR_HE_CAP_MCS_SET, + NL80211_BAND_IFTYPE_ATTR_HE_CAP_PPE, + + /* keep last */ + __NL80211_BAND_IFTYPE_ATTR_AFTER_LAST, + NL80211_BAND_IFTYPE_ATTR_MAX = __NL80211_BAND_IFTYPE_ATTR_AFTER_LAST - 1 +}; + +/** * enum nl80211_band_attr - band attributes * @__NL80211_BAND_ATTR_INVALID: attribute number 0 is reserved * @NL80211_BAND_ATTR_FREQS: supported frequencies in this band, @@ -3036,6 +3268,8 @@ enum nl80211_mpath_info { * @NL80211_BAND_ATTR_VHT_MCS_SET: 32-byte attribute containing the MCS set as * defined in 802.11ac * @NL80211_BAND_ATTR_VHT_CAPA: VHT capabilities, as in the HT information IE + * @NL80211_BAND_ATTR_IFTYPE_DATA: nested array attribute, with each entry using + * attributes from &enum nl80211_band_iftype_attr * @NL80211_BAND_ATTR_MAX: highest band attribute currently defined * @__NL80211_BAND_ATTR_AFTER_LAST: internal use */ @@ -3051,6 +3285,7 @@ enum nl80211_band_attr { NL80211_BAND_ATTR_VHT_MCS_SET, NL80211_BAND_ATTR_VHT_CAPA, + NL80211_BAND_ATTR_IFTYPE_DATA, /* keep last */ __NL80211_BAND_ATTR_AFTER_LAST, @@ -3060,6 +3295,29 @@ enum nl80211_band_attr { #define NL80211_BAND_ATTR_HT_CAPA NL80211_BAND_ATTR_HT_CAPA /** + * enum nl80211_wmm_rule - regulatory wmm rule + * + * @__NL80211_WMMR_INVALID: attribute number 0 is reserved + * @NL80211_WMMR_CW_MIN: Minimum contention window slot. + * @NL80211_WMMR_CW_MAX: Maximum contention window slot. + * @NL80211_WMMR_AIFSN: Arbitration Inter Frame Space. + * @NL80211_WMMR_TXOP: Maximum allowed tx operation time. + * @nl80211_WMMR_MAX: highest possible wmm rule. + * @__NL80211_WMMR_LAST: Internal use. + */ +enum nl80211_wmm_rule { + __NL80211_WMMR_INVALID, + NL80211_WMMR_CW_MIN, + NL80211_WMMR_CW_MAX, + NL80211_WMMR_AIFSN, + NL80211_WMMR_TXOP, + + /* keep last */ + __NL80211_WMMR_LAST, + NL80211_WMMR_MAX = __NL80211_WMMR_LAST - 1 +}; + +/** * enum nl80211_frequency_attr - frequency attributes * @__NL80211_FREQUENCY_ATTR_INVALID: attribute number 0 is reserved * @NL80211_FREQUENCY_ATTR_FREQ: Frequency in MHz @@ -3108,6 +3366,9 @@ enum nl80211_band_attr { * on this channel in current regulatory domain. * @NL80211_FREQUENCY_ATTR_NO_10MHZ: 10 MHz operation is not allowed * on this channel in current regulatory domain. + * @NL80211_FREQUENCY_ATTR_WMM: this channel has wmm limitations. + * This is a nested attribute that contains the wmm limitation per AC. + * (see &enum nl80211_wmm_rule) * @NL80211_FREQUENCY_ATTR_MAX: highest frequency attribute number * currently defined * @__NL80211_FREQUENCY_ATTR_AFTER_LAST: internal use @@ -3136,6 +3397,7 @@ enum nl80211_frequency_attr { NL80211_FREQUENCY_ATTR_IR_CONCURRENT, NL80211_FREQUENCY_ATTR_NO_20MHZ, NL80211_FREQUENCY_ATTR_NO_10MHZ, + NL80211_FREQUENCY_ATTR_WMM, /* keep last */ __NL80211_FREQUENCY_ATTR_AFTER_LAST, @@ -3319,7 +3581,7 @@ enum nl80211_sched_scan_match_attr { * @NL80211_RRF_AUTO_BW: maximum available bandwidth should be calculated * base on contiguous rules and wider channels will be allowed to cross * multiple contiguous/overlapping frequency ranges. - * @NL80211_RRF_IR_CONCURRENT: See &NL80211_FREQUENCY_ATTR_IR_CONCURRENT + * @NL80211_RRF_IR_CONCURRENT: See %NL80211_FREQUENCY_ATTR_IR_CONCURRENT * @NL80211_RRF_NO_HT40MINUS: channels can't be used in HT40- operation * @NL80211_RRF_NO_HT40PLUS: channels can't be used in HT40+ operation * @NL80211_RRF_NO_80MHZ: 80MHz operation not allowed @@ -4945,6 +5207,27 @@ enum nl80211_feature_flags { * probe request tx deferral and suppression * @NL80211_EXT_FEATURE_MFP_OPTIONAL: Driver supports the %NL80211_MFP_OPTIONAL * value in %NL80211_ATTR_USE_MFP. + * @NL80211_EXT_FEATURE_LOW_SPAN_SCAN: Driver supports low span scan. + * @NL80211_EXT_FEATURE_LOW_POWER_SCAN: Driver supports low power scan. + * @NL80211_EXT_FEATURE_HIGH_ACCURACY_SCAN: Driver supports high accuracy scan. + * @NL80211_EXT_FEATURE_DFS_OFFLOAD: HW/driver will offload DFS actions. + * Device or driver will do all DFS-related actions by itself, + * informing user-space about CAC progress, radar detection event, + * channel change triggered by radar detection event. + * No need to start CAC from user-space, no need to react to + * "radar detected" event. + * @NL80211_EXT_FEATURE_CONTROL_PORT_OVER_NL80211: Driver supports sending and + * receiving control port frames over nl80211 instead of the netdevice. + * @NL80211_EXT_FEATURE_DATA_ACK_SIGNAL_SUPPORT: This Driver support data ack + * rssi if firmware support, this flag is to intimate about ack rssi + * support to nl80211. + * @NL80211_EXT_FEATURE_TXQS: Driver supports FQ-CoDel-enabled intermediate + * TXQs. + * @NL80211_EXT_FEATURE_SCAN_RANDOM_SN: Driver/device supports randomizing the + * SN in probe request frames if requested by %NL80211_SCAN_FLAG_RANDOM_SN. + * @NL80211_EXT_FEATURE_SCAN_MIN_PREQ_CONTENT: Driver/device can omit all data + * except for supported rates from the probe request content if requested + * by the %NL80211_SCAN_FLAG_MIN_PREQ_CONTENT flag. * * @NUM_NL80211_EXT_FEATURES: number of extended features. * @MAX_NL80211_EXT_FEATURES: highest extended feature index. @@ -4972,6 +5255,15 @@ enum nl80211_ext_feature_index { NL80211_EXT_FEATURE_OCE_PROBE_REQ_HIGH_TX_RATE, NL80211_EXT_FEATURE_OCE_PROBE_REQ_DEFERRAL_SUPPRESSION, NL80211_EXT_FEATURE_MFP_OPTIONAL, + NL80211_EXT_FEATURE_LOW_SPAN_SCAN, + NL80211_EXT_FEATURE_LOW_POWER_SCAN, + NL80211_EXT_FEATURE_HIGH_ACCURACY_SCAN, + NL80211_EXT_FEATURE_DFS_OFFLOAD, + NL80211_EXT_FEATURE_CONTROL_PORT_OVER_NL80211, + NL80211_EXT_FEATURE_DATA_ACK_SIGNAL_SUPPORT, + NL80211_EXT_FEATURE_TXQS, + NL80211_EXT_FEATURE_SCAN_RANDOM_SN, + NL80211_EXT_FEATURE_SCAN_MIN_PREQ_CONTENT, /* add new features before the definition below */ NUM_NL80211_EXT_FEATURES, @@ -5032,6 +5324,10 @@ enum nl80211_timeout_reason { * of NL80211_CMD_TRIGGER_SCAN and NL80211_CMD_START_SCHED_SCAN * requests. * + * NL80211_SCAN_FLAG_LOW_SPAN, NL80211_SCAN_FLAG_LOW_POWER, and + * NL80211_SCAN_FLAG_HIGH_ACCURACY flags are exclusive of each other, i.e., only + * one of them can be used in the request. + * * @NL80211_SCAN_FLAG_LOW_PRIORITY: scan request has low priority * @NL80211_SCAN_FLAG_FLUSH: flush cache before scanning * @NL80211_SCAN_FLAG_AP: force a scan even if the interface is configured @@ -5059,7 +5355,26 @@ enum nl80211_timeout_reason { * and suppression (if it has received a broadcast Probe Response frame, * Beacon frame or FILS Discovery frame from an AP that the STA considers * a suitable candidate for (re-)association - suitable in terms of - * SSID and/or RSSI + * SSID and/or RSSI. + * @NL80211_SCAN_FLAG_LOW_SPAN: Span corresponds to the total time taken to + * accomplish the scan. Thus, this flag intends the driver to perform the + * scan request with lesser span/duration. It is specific to the driver + * implementations on how this is accomplished. Scan accuracy may get + * impacted with this flag. + * @NL80211_SCAN_FLAG_LOW_POWER: This flag intends the scan attempts to consume + * optimal possible power. Drivers can resort to their specific means to + * optimize the power. Scan accuracy may get impacted with this flag. + * @NL80211_SCAN_FLAG_HIGH_ACCURACY: Accuracy here intends to the extent of scan + * results obtained. Thus HIGH_ACCURACY scan flag aims to get maximum + * possible scan results. This flag hints the driver to use the best + * possible scan configuration to improve the accuracy in scanning. + * Latency and power use may get impacted with this flag. + * @NL80211_SCAN_FLAG_RANDOM_SN: randomize the sequence number in probe + * request frames from this scan to avoid correlation/tracking being + * possible. + * @NL80211_SCAN_FLAG_MIN_PREQ_CONTENT: minimize probe request content to + * only have supported rates and no additional capabilities (unless + * added by userspace explicitly.) */ enum nl80211_scan_flags { NL80211_SCAN_FLAG_LOW_PRIORITY = 1<<0, @@ -5070,6 +5385,11 @@ enum nl80211_scan_flags { NL80211_SCAN_FLAG_ACCEPT_BCAST_PROBE_RESP = 1<<5, NL80211_SCAN_FLAG_OCE_PROBE_REQ_HIGH_TX_RATE = 1<<6, NL80211_SCAN_FLAG_OCE_PROBE_REQ_DEFERRAL_SUPPRESSION = 1<<7, + NL80211_SCAN_FLAG_LOW_SPAN = 1<<8, + NL80211_SCAN_FLAG_LOW_POWER = 1<<9, + NL80211_SCAN_FLAG_HIGH_ACCURACY = 1<<10, + NL80211_SCAN_FLAG_RANDOM_SN = 1<<11, + NL80211_SCAN_FLAG_MIN_PREQ_CONTENT = 1<<12, }; /** @@ -5127,6 +5447,8 @@ enum nl80211_smps_mode { * non-operating channel is expired and no longer valid. New CAC must * be done on this channel before starting the operation. This is not * applicable for ETSI dfs domain where pre-CAC is valid for ever. + * @NL80211_RADAR_CAC_STARTED: Channel Availability Check has been started, + * should be generated by HW if NL80211_EXT_FEATURE_DFS_OFFLOAD is enabled. */ enum nl80211_radar_event { NL80211_RADAR_DETECTED, @@ -5134,6 +5456,7 @@ enum nl80211_radar_event { NL80211_RADAR_CAC_ABORTED, NL80211_RADAR_NOP_FINISHED, NL80211_RADAR_PRE_CAC_EXPIRED, + NL80211_RADAR_CAC_STARTED, }; /** @@ -5425,11 +5748,11 @@ enum nl80211_nan_func_attributes { * @NL80211_NAN_SRF_INCLUDE: present if the include bit of the SRF set. * This is a flag. * @NL80211_NAN_SRF_BF: Bloom Filter. Present if and only if - * &NL80211_NAN_SRF_MAC_ADDRS isn't present. This attribute is binary. + * %NL80211_NAN_SRF_MAC_ADDRS isn't present. This attribute is binary. * @NL80211_NAN_SRF_BF_IDX: index of the Bloom Filter. Mandatory if - * &NL80211_NAN_SRF_BF is present. This is a u8. + * %NL80211_NAN_SRF_BF is present. This is a u8. * @NL80211_NAN_SRF_MAC_ADDRS: list of MAC addresses for the SRF. Present if - * and only if &NL80211_NAN_SRF_BF isn't present. This is a nested + * and only if %NL80211_NAN_SRF_BF isn't present. This is a nested * attribute. Each nested attribute is a MAC address. * @NUM_NL80211_NAN_SRF_ATTR: internal * @NL80211_NAN_SRF_ATTR_MAX: highest NAN SRF attribute @@ -5469,4 +5792,15 @@ enum nl80211_nan_match_attributes { NL80211_NAN_MATCH_ATTR_MAX = NUM_NL80211_NAN_MATCH_ATTR - 1 }; +/** + * nl80211_external_auth_action - Action to perform with external + * authentication request. Used by NL80211_ATTR_EXTERNAL_AUTH_ACTION. + * @NL80211_EXTERNAL_AUTH_START: Start the authentication. + * @NL80211_EXTERNAL_AUTH_ABORT: Abort the ongoing authentication. + */ +enum nl80211_external_auth_action { + NL80211_EXTERNAL_AUTH_START, + NL80211_EXTERNAL_AUTH_ABORT, +}; + #endif /* __LINUX_NL80211_H */