--- a/nl80211.h
+++ b/nl80211.h
@@ -301,29 +301,6 @@
  */
 
 /**
- * DOC: FILS shared key crypto offload
- *
- * This feature is applicable to drivers running in AP mode.
- *
- * FILS shared key crypto offload can be advertised by drivers by setting
- * @NL80211_EXT_FEATURE_FILS_CRYPTO_OFFLOAD flag. The drivers that support
- * FILS shared key crypto offload should be able to encrypt and decrypt
- * association frames for FILS shared key authentication as per IEEE 802.11ai.
- * With this capability, for FILS key derivation, drivers depend on userspace.
- *
- * After FILS key derivation, userspace shares the FILS AAD details with the
- * driver and the driver stores the same to use in decryption of association
- * request and in encryption of association response. The below parameters
- * should be given to the driver in %NL80211_CMD_SET_FILS_AAD.
- *	%NL80211_ATTR_MAC - STA MAC address, used for storing FILS AAD per STA
- *	%NL80211_ATTR_FILS_KEK - Used for encryption or decryption
- *	%NL80211_ATTR_FILS_NONCES - Used for encryption or decryption
- *			(STA Nonce 16 bytes followed by AP Nonce 16 bytes)
- *
- * Once the association is done, the driver cleans the FILS AAD data.
- */
-
-/**
  * enum nl80211_commands - supported nl80211 commands
  *
  * @NL80211_CMD_UNSPEC: unspecified command to catch errors
@@ -1226,12 +1203,6 @@
  * @NL80211_CMD_COLOR_CHANGE_COMPLETED: Notify userland that the color change
  *	has completed
  *
- * @NL80211_CMD_SET_FILS_AAD: Set FILS AAD data to the driver using -
- *	&NL80211_ATTR_MAC - for STA MAC address
- *	&NL80211_ATTR_FILS_KEK - for KEK
- *	&NL80211_ATTR_FILS_NONCES - for FILS Nonces
- *		(STA Nonce 16 bytes followed by AP Nonce 16 bytes)
- *
  * @NL80211_CMD_MAX: highest used command number
  * @__NL80211_CMD_AFTER_LAST: internal use
  */
@@ -1472,8 +1443,6 @@ enum nl80211_commands {
 	NL80211_CMD_COLOR_CHANGE_ABORTED,
 	NL80211_CMD_COLOR_CHANGE_COMPLETED,
 
-	NL80211_CMD_SET_FILS_AAD,
-
 	/* add new commands above here */
 
 	/* used to define NL80211_CMD_MAX below */
@@ -2639,6 +2608,9 @@ enum nl80211_commands {
  *	Mandatory parameter for the transmitting interface to enable MBSSID.
  *	Optional for the non-transmitting interfaces.
  *
+ * @NL80211_ATTR_WIPHY_ANTENNA_GAIN: Configured antenna gain. Used to reduce
+ *	transmit power to stay within regulatory limits. u32, dBi.
+ *
  * @NUM_NL80211_ATTR: total number of nl80211_attrs available
  * @NL80211_ATTR_MAX: highest attribute number currently defined
  * @__NL80211_ATTR_AFTER_LAST: internal use
@@ -3145,6 +3117,8 @@ enum nl80211_attrs {
 	NL80211_ATTR_MBSSID_CONFIG,
 	NL80211_ATTR_MBSSID_ELEMS,
 
+	NL80211_ATTR_WIPHY_ANTENNA_GAIN,
+
 	/* add attributes here, update the policy in nl80211.c */
 
 	__NL80211_ATTR_AFTER_LAST,
@@ -4978,7 +4952,6 @@ enum nl80211_txrate_gi {
  * @NL80211_BAND_60GHZ: around 60 GHz band (58.32 - 69.12 GHz)
  * @NL80211_BAND_6GHZ: around 6 GHz band (5.9 - 7.2 GHz)
  * @NL80211_BAND_S1GHZ: around 900MHz, supported by S1G PHYs
- * @NL80211_BAND_LC: light communication band (placeholder)
  * @NUM_NL80211_BANDS: number of bands, avoid using this in userspace
  *	since newer kernel versions may support more bands
  */
@@ -4988,7 +4961,6 @@ enum nl80211_band {
 	NL80211_BAND_60GHZ,
 	NL80211_BAND_6GHZ,
 	NL80211_BAND_S1GHZ,
-	NL80211_BAND_LC,
 
 	NUM_NL80211_BANDS,
 };
@@ -6046,11 +6018,6 @@ enum nl80211_feature_flags {
  * @NL80211_EXT_FEATURE_BSS_COLOR: The driver supports BSS color collision
  *	detection and change announcemnts.
  *
- * @NL80211_EXT_FEATURE_FILS_CRYPTO_OFFLOAD: Driver running in AP mode supports
- *	FILS encryption and decryption for (Re)Association Request and Response
- *	frames. Userspace has to share FILS AAD details to the driver by using
- *	@NL80211_CMD_SET_FILS_AAD.
- *
  * @NUM_NL80211_EXT_FEATURES: number of extended features.
  * @MAX_NL80211_EXT_FEATURES: highest extended feature index.
  */
@@ -6116,7 +6083,6 @@ enum nl80211_ext_feature_index {
 	NL80211_EXT_FEATURE_SECURE_RTT,
 	NL80211_EXT_FEATURE_PROT_RANGE_NEGO_AND_MEASURE,
 	NL80211_EXT_FEATURE_BSS_COLOR,
-	NL80211_EXT_FEATURE_FILS_CRYPTO_OFFLOAD,
 
 	/* add new features before the definition below */
 	NUM_NL80211_EXT_FEATURES,
@@ -7424,7 +7390,7 @@ enum nl80211_sar_specs_attrs {
  * @NL80211_MBSSID_CONFIG_ATTR_MAX_EMA_PROFILE_PERIODICITY: Used by the kernel
  *	to advertise the maximum profile periodicity supported by the driver
  *	if EMA is enabled. Driver should indicate EMA support to the userspace
- *	by setting wiphy->ema_max_profile_periodicity to
+ *	by setting wiphy->mbssid_max_ema_profile_periodicity to
  *	a non-zero value.
  *
  * @NL80211_MBSSID_CONFIG_ATTR_INDEX: Mandatory parameter to pass the index of
@@ -7443,7 +7409,7 @@ enum nl80211_sar_specs_attrs {
  *
  * @NL80211_MBSSID_CONFIG_ATTR_EMA: Flag used to enable EMA AP feature.
  *	Setting this flag is permitted only if the driver advertises EMA support
- *	by setting wiphy->ema_max_profile_periodicity to non-zero.
+ *	by setting wiphy->mbssid_max_ema_profile_periodicity to non-zero.
  *
  * @__NL80211_MBSSID_CONFIG_ATTR_LAST: Internal
  * @NL80211_MBSSID_CONFIG_ATTR_MAX: highest attribute
--- a/info.c
+++ b/info.c
@@ -701,7 +701,6 @@ broken_combination:
 		ext_feat_print(tb, OPERATING_CHANNEL_VALIDATION, "Operating Channel Validation (OCV) support");
 		ext_feat_print(tb, 4WAY_HANDSHAKE_AP_PSK, "AP mode PSK offload support");
 		ext_feat_print(tb, BSS_COLOR, "BSS coloring support");
-		ext_feat_print(tb, FILS_CRYPTO_OFFLOAD, "FILS crypto offload");
 	}
 
 	if (tb_msg[NL80211_ATTR_COALESCE_RULE]) {