/package/kernel/mac80211/patches/rt2x00/

• ../
• 001-rt2x00-use-simple_read_from_buffer.patch
• 002-rt2800-move-usb-specific-txdone-txstatus-routines-to.patch
• 003-rt2800mmio-use-txdone-txstatus-routines-from-lib.patch
• 004-rt2x00-do-not-check-for-txstatus-timeout-every-time-.patch
• 005-rt2x00-use-different-txstatus-timeouts-when-flushing.patch
• 006-rt2800-flush-and-txstatus-rework-for-rt2800mmio.patch
• 007-rt2x00-rt2400pci-mark-expected-switch-fall-through.patch
• 008-rt2x00-rt2500pci-mark-expected-switch-fall-through.patch
• 009-rt2x00-rt2800lib-mark-expected-switch-fall-throughs.patch
• 010-rt2x00-rt61pci-mark-expected-switch-fall-through.patch
• 011-cross-tree-phase-out-dma_zalloc_coherent.patch
• 012-rt2x00-reduce-tx-power-to-nominal-level-on-RT6352.patch
• 013-rt2x00-Work-around-a-firmware-bug-with-shared-keys.patch
• 014-rt2x00-no-need-to-check-return-value-of-debugfs_crea.patch
• 015-rt2x00-remove-unneeded-check.patch
• 016-rt2x00-remove-confusing-AGC-register.patch
• 017-rt2800-enable-TX_PIN_CFG_LNA_PE_-bits-per-band.patch
• 018-rt2800-enable-TX_PIN_CFG_RFRX_EN-only-for-MT7620.patch
• 019-rt2800-comment-and-simplify-AGC-init-for-RT6352.patch
• 020-cfg80211-add-ratelimited-variants-of-err-and-warn.patch
• 021-rt2x00-use-ratelimited-variants-dev_warn-dev_err.patch
• 022-rt2x00-check-number-of-EPROTO-errors.patch
• 023-rt2x00-do-not-print-error-when-queue-is-full.patch
• 024-rt2800-partially-restore-old-mmio-txstatus-behaviour.patch
• 025-rt2800-new-flush-implementation-for-SoC-devices.patch
• 026-rt2800-move-txstatus-pending-routine.patch
• 027-rt2800mmio-fetch-tx-status-changes.patch
• 028-rt2800mmio-use-timer-and-work-for-handling-tx-status.patch
• 029-rt2x00-remove-last_nostatus_check.patch
• 030-rt2x00-remove-not-used-entry-field.patch
• 031-rt2x00mmio-remove-legacy-comment.patch
• 050-rt2x00-add-RT3883-support.patch
• 060-rt2x00-allow-to-specify-watchdog-interval.patch
• 061-rt2800-add-helpers-for-reading-dma-done-index.patch
• 062-rt2800-initial-watchdog-implementation.patch
• 063-rt2800-add-pre_reset_hw-callback.patch
• 064-rt2800-do-not-nullify-initialization-vector-data.patch
• 065-rt2x00-add-restart-hw.patch
• 066-rt2800-do-not-enable-watchdog-by-default.patch
• 067-rt2x00usb-fix-rx-queue-hang.patch
• 068-rt2x00usb-remove-unnecessary-rx-flag-checks.patch
• 069-rt2x00-no-need-to-check-return-value-of-debugfs_crea.patch
• 070-rt2800usb-Add-new-rt2800usb-device-PLANEX-GW-USMicro.patch
• 071-rt2x00-clear-IV-s-on-start-to-fix-AP-mode-regression.patch
• 072-rt2x00-do-not-set-IEEE80211_TX_STAT_AMPDU_NO_BACK-on.patch
• 073-rt2x00-clear-up-IV-s-on-key-removal.patch
• 074-Revert-rt2800-enable-TX_PIN_CFG_LNA_PE_-bits-per-ban.patch
• 075-rt2800-remove-errornous-duplicate-condition.patch
• 100-rt2x00_options.patch
• 501-rt2x00-allow-to-build-rt2800soc-module-for-RT3883.patch
• 601-rt2x00-introduce-rt2x00_platform_h.patch
• 602-rt2x00-introduce-rt2x00eeprom.patch
• 603-rt2x00-of_load_eeprom_filename.patch
• 604-rt2x00-load-eeprom-on-SoC-from-a-mtd-device-defines-.patch
• 606-rt2x00-allow_disabling_bands_through_platform_data.patch
• 607-rt2x00-add_platform_data_mac_addr.patch
• 608-rt2x00-allow_disabling_bands_through_dts.patch
• 609-rt2x00-make-wmac-loadable-via-OF-on-rt288x-305x-SoC.patch
• 610-rt2x00-change-led-polarity-from-OF.patch
• 611-rt2x00-add-AP+STA-support.patch
• 612-rt2x00-led-tpt-trigger-support.patch
• 650-rt2x00-add-support-for-external-PA-on-MT7620.patch
• 982-rt2x00-add-rf-self-txdc-calibration.patch
• 983-rt2x00-add-r-calibration.patch
• 984-rt2x00-add-rxdcoc-calibration.patch
• 985-rt2x00-add-rxiq-calibration.patch
• 986-rt2x00-add-TX-LOFT-calibration.patch