commit 4c8a3486cb577d40c1ef75f0a8dc9a04773eef83 Author: Nickolay Ledovskikh Date: Fri Apr 25 22:53:34 2014 +0400 ath5k: Fix AR5K_PHY_TXPOWER_RATE_MAX register value setting. I was reading ath5k power setting code and noticed typing error in ath5k_hw_txpower function. Invalid value was written to AR5K_PHY_TXPOWER_RATE_MAX register. Signed-off-by: Nikolay Ledovskikh Acked-by: Nick Kossifidis Signed-off-by: John W. Linville commit 4d76248013dbb1948429555208900a585b0f351d Author: Janusz Dziedzic Date: Tue Apr 8 13:38:43 2014 +0200 ath9k: Enable DFS only when ATH9K_DFS_CERTIFIED Add DFS interface combination only when CONFIG_ATH9K_DFS_CERTIFIED is set. In other case user can run CAC/beaconing without proper handling of pulse events (without radar detection activated). Reported-by: Cedric Voncken Signed-off-by: Janusz Dziedzic Signed-off-by: John W. Linville commit c83a4e5156a4b4dd22137d33a5625440982d6d37 Author: Rajkumar Manoharan Date: Mon Apr 28 21:17:08 2014 +0530 ath9k_hw: fix worse EVM for 11b rates Adjust FIR filter co-efficients to improve EVM for 11b rates. Signed-off-by: Rajkumar Manoharan Signed-off-by: John W. Linville commit 8aab2c7a2f4a957e344db429dfb1190ae59ce8b5 Author: Rajkumar Manoharan Date: Mon Apr 28 21:17:07 2014 +0530 ath9k_hw: update ar9300 initvals * rfsat gainchange hysteresis of rf_gain stuck with large interference present. Signed-off-by: Rajkumar Manoharan Signed-off-by: John W. Linville commit 8c7ae357cc5b6bd037ad2d666e9f3789cf882925 Author: Rajkumar Manoharan Date: Wed Apr 23 15:07:57 2014 +0530 ath9k: fix race in setting ATH_OP_INVALID The commit "ath9k: move sc_flags to ath_common" moved setting ATH_OP_INVALID flag below ieee80211_register_hw. This is causing the flag never being cleared randomly as the drv_start is called prior to setting flag. Fix this by setting the flag prior to register_hw. Signed-off-by: Rajkumar Manoharan Signed-off-by: John W. Linville commit c82552c5b0cb1735dbcbad78b1ffc6d3c212dc56 Author: Tim Harvey Date: Mon Apr 21 16:14:57 2014 -0700 ath9k: add a recv budget Implement a recv budget so that in cases of high traffic we still allow other taskets to get processed. Without this, we can encounter a host of issues during high wireless traffic reception depending on system load including rcu stall's detected (ARM), soft lockups, failure to service critical tasks such as watchdog resets, and triggering of the tx stuck tasklet. The same thing was proposed previously by Ben: http://www.spinics.net/lists/linux-wireless/msg112891.html The only difference here is that I make sure only processed packets are counted in the budget by checking at the end of the rx loop. Signed-off-by: Tim Harvey Acked-by: Felix Fietkau Signed-off-by: John W. Linville commit 3a758134e66ca74a9df792616b5288b2fa2cfd7f Author: Tim Harvey Date: Mon Apr 21 16:14:56 2014 -0700 ath9k: fix possible hang on flush If a flush is requested, make sure to clear the descriptor once we've processed it. This resolves a hang that will occur if all RX descriptors are full when a flush is requested. Signed-off-by: Tim Harvey Acked-by: Felix Fietkau Signed-off-by: John W. Linville commit eefb1d6adc4c60d219182b8917e4567484ce07fc Author: Felix Fietkau Date: Mon Apr 28 18:27:41 2014 +0200 ath9k: remove tid->paused flag There are some corner cases where the driver could get stuck with a full tid queue that is paused, leading to a software tx queue hang. Since the tx queueing rework, pausing per-tid queues on aggregation session setup is no longer necessary. The driver will assign sequence numbers to buffered frames when a new session is established, in order to get the correct starting sequence number. mac80211 prevents new frames from entering the queue during setup. Signed-off-by: Felix Fietkau commit 98a713933d8495f4078f561c1e651b738dd5b531 Author: Felix Fietkau Date: Sun Apr 27 14:49:03 2014 +0200 ath9k_hw: do not lower ANI setting below default on AR913x When the amount of noise fluctuates strongly, low immunity settings can sometimes disrupt signal detection on AR913x chips. When that happens, no OFDM/CCK errors are reported anymore, and ANI tunes the radio to the lowest immunity settings. Usually rx/tx fails as well in that case. To fix this, keep noise immunity settings at or above ANI default level, which will keep radio parameters at or above INI values. Signed-off-by: Felix Fietkau commit 7cbb4c021bfd1e656f5b9953a947ab3c64e4e3b0 Author: Felix Fietkau Date: Thu Apr 10 10:49:01 2014 +0200 mac80211: exclude AP_VLAN interfaces from tx power calculation Their power value is initialized to zero. This patch fixes an issue where the configured power drops to the minimum value when AP_VLAN interfaces are created/removed. Cc: stable@vger.kernel.org Signed-off-by: Felix Fietkau commit 0ca13e26341733bf9577287fb04a3bef0d2f5cc9 Author: Felix Fietkau Date: Wed Apr 9 00:07:01 2014 +0200 mac80211: suppress BSS info change notifications for AP_VLAN Fixes warnings on tx power changes Signed-off-by: Felix Fietkau commit ec998e5991781ecdaad0911dc64f1c8d3749c308 Author: Felix Fietkau Date: Tue Apr 8 23:42:17 2014 +0200 ath9k: fix a scheduling while atomic bug in CSA handling Commit "ath9k: prepare for multi-interface CSA support" added a call to ieee80211_iterate_active_interfaces in atomic context (beacon tasklet), which is crashing. Use ieee80211_iterate_active_interfaces_atomic instead. Signed-off-by: Felix Fietkau commit 93f310a38a1d81a4bc8fcd9bf29628bd721cf2ef Author: Felix Fietkau Date: Sun Apr 6 23:35:28 2014 +0200 ath9k_hw: reduce ANI firstep range for older chips Use 0-8 instead of 0-16, which is closer to the old implementation. Also drop the overwrite of the firstep_low parameter to improve stability. Signed-off-by: Felix Fietkau --- a/drivers/net/wireless/ath/ath9k/ar5008_phy.c +++ b/drivers/net/wireless/ath/ath9k/ar5008_phy.c @@ -1004,11 +1004,9 @@ static bool ar5008_hw_ani_control_new(st case ATH9K_ANI_FIRSTEP_LEVEL:{ u32 level = param; - value = level * 2; + value = level; REG_RMW_FIELD(ah, AR_PHY_FIND_SIG, AR_PHY_FIND_SIG_FIRSTEP, value); - REG_RMW_FIELD(ah, AR_PHY_FIND_SIG_LOW, - AR_PHY_FIND_SIG_FIRSTEP_LOW, value); if (level != aniState->firstepLevel) { ath_dbg(common, ANI, --- a/drivers/net/wireless/ath/ath9k/beacon.c +++ b/drivers/net/wireless/ath/ath9k/beacon.c @@ -312,10 +312,9 @@ static void ath9k_csa_update_vif(void *d void ath9k_csa_update(struct ath_softc *sc) { - ieee80211_iterate_active_interfaces(sc->hw, - IEEE80211_IFACE_ITER_NORMAL, - ath9k_csa_update_vif, - sc); + ieee80211_iterate_active_interfaces_atomic(sc->hw, + IEEE80211_IFACE_ITER_NORMAL, + ath9k_csa_update_vif, sc); } void ath9k_beacon_tasklet(unsigned long data) --- a/net/mac80211/main.c +++ b/net/mac80211/main.c @@ -152,6 +152,8 @@ static u32 ieee80211_hw_conf_chan(struct list_for_each_entry_rcu(sdata, &local->interfaces, list) { if (!rcu_access_pointer(sdata->vif.chanctx_conf)) continue; + if (sdata->vif.type == NL80211_IFTYPE_AP_VLAN) + continue; power = min(power, sdata->vif.bss_conf.txpower); } rcu_read_unlock(); @@ -203,7 +205,7 @@ void ieee80211_bss_info_change_notify(st { struct ieee80211_local *local = sdata->local; - if (!changed) + if (!changed || sdata->vif.type == NL80211_IFTYPE_AP_VLAN) return; drv_bss_info_changed(local, sdata, &sdata->vif.bss_conf, changed); --- a/drivers/net/wireless/ath/ath9k/ani.c +++ b/drivers/net/wireless/ath/ath9k/ani.c @@ -155,6 +155,9 @@ static void ath9k_hw_set_ofdm_nil(struct ATH9K_ANI_RSSI_THR_LOW, ATH9K_ANI_RSSI_THR_HIGH); + if (AR_SREV_9100(ah) && immunityLevel < ATH9K_ANI_OFDM_DEF_LEVEL) + immunityLevel = ATH9K_ANI_OFDM_DEF_LEVEL; + if (!scan) aniState->ofdmNoiseImmunityLevel = immunityLevel; @@ -235,6 +238,9 @@ static void ath9k_hw_set_cck_nil(struct BEACON_RSSI(ah), ATH9K_ANI_RSSI_THR_LOW, ATH9K_ANI_RSSI_THR_HIGH); + if (AR_SREV_9100(ah) && immunityLevel < ATH9K_ANI_CCK_DEF_LEVEL) + immunityLevel = ATH9K_ANI_CCK_DEF_LEVEL; + if (ah->opmode == NL80211_IFTYPE_STATION && BEACON_RSSI(ah) <= ATH9K_ANI_RSSI_THR_LOW && immunityLevel > ATH9K_ANI_CCK_MAX_LEVEL_LOW_RSSI) --- a/drivers/net/wireless/ath/ath9k/ath9k.h +++ b/drivers/net/wireless/ath/ath9k/ath9k.h @@ -251,7 +251,6 @@ struct ath_atx_tid { s8 bar_index; bool sched; - bool paused; bool active; }; --- a/drivers/net/wireless/ath/ath9k/xmit.c +++ b/drivers/net/wireless/ath/ath9k/xmit.c @@ -107,9 +107,6 @@ static void ath_tx_queue_tid(struct ath_ { struct ath_atx_ac *ac = tid->ac; - if (tid->paused) - return; - if (tid->sched) return; @@ -1407,7 +1404,6 @@ int ath_tx_aggr_start(struct ath_softc * ath_tx_tid_change_state(sc, txtid); txtid->active = true; - txtid->paused = true; *ssn = txtid->seq_start = txtid->seq_next; txtid->bar_index = -1; @@ -1427,7 +1423,6 @@ void ath_tx_aggr_stop(struct ath_softc * ath_txq_lock(sc, txq); txtid->active = false; - txtid->paused = false; ath_tx_flush_tid(sc, txtid); ath_tx_tid_change_state(sc, txtid); ath_txq_unlock_complete(sc, txq); @@ -1487,7 +1482,7 @@ void ath_tx_aggr_wakeup(struct ath_softc ath_txq_lock(sc, txq); ac->clear_ps_filter = true; - if (!tid->paused && ath_tid_has_buffered(tid)) { + if (ath_tid_has_buffered(tid)) { ath_tx_queue_tid(txq, tid); ath_txq_schedule(sc, txq); } @@ -1510,7 +1505,6 @@ void ath_tx_aggr_resume(struct ath_softc ath_txq_lock(sc, txq); tid->baw_size = IEEE80211_MIN_AMPDU_BUF << sta->ht_cap.ampdu_factor; - tid->paused = false; if (ath_tid_has_buffered(tid)) { ath_tx_queue_tid(txq, tid); @@ -1544,8 +1538,6 @@ void ath9k_release_buffered_frames(struc continue; tid = ATH_AN_2_TID(an, i); - if (tid->paused) - continue; ath_txq_lock(sc, tid->ac->txq); while (nframes > 0) { @@ -1844,9 +1836,6 @@ void ath_txq_schedule(struct ath_softc * list_del(&tid->list); tid->sched = false; - if (tid->paused) - continue; - if (ath_tx_sched_aggr(sc, txq, tid, &stop)) sent = true; @@ -2698,7 +2687,6 @@ void ath_tx_node_init(struct ath_softc * tid->baw_size = WME_MAX_BA; tid->baw_head = tid->baw_tail = 0; tid->sched = false; - tid->paused = false; tid->active = false; __skb_queue_head_init(&tid->buf_q); __skb_queue_head_init(&tid->retry_q); --- a/drivers/net/wireless/ath/ath9k/recv.c +++ b/drivers/net/wireless/ath/ath9k/recv.c @@ -975,6 +975,7 @@ int ath_rx_tasklet(struct ath_softc *sc, u64 tsf = 0; unsigned long flags; dma_addr_t new_buf_addr; + unsigned int budget = 512; if (edma) dma_type = DMA_BIDIRECTIONAL; @@ -1113,15 +1114,17 @@ requeue_drop_frag: } requeue: list_add_tail(&bf->list, &sc->rx.rxbuf); - if (flush) - continue; if (edma) { ath_rx_edma_buf_link(sc, qtype); } else { ath_rx_buf_relink(sc, bf); - ath9k_hw_rxena(ah); + if (!flush) + ath9k_hw_rxena(ah); } + + if (!budget--) + break; } while (1); if (!(ah->imask & ATH9K_INT_RXEOL)) { --- a/drivers/net/wireless/ath/ath9k/ahb.c +++ b/drivers/net/wireless/ath/ath9k/ahb.c @@ -86,7 +86,6 @@ static int ath_ahb_probe(struct platform int irq; int ret = 0; struct ath_hw *ah; - struct ath_common *common; char hw_name[64]; if (!dev_get_platdata(&pdev->dev)) { @@ -146,9 +145,6 @@ static int ath_ahb_probe(struct platform wiphy_info(hw->wiphy, "%s mem=0x%lx, irq=%d\n", hw_name, (unsigned long)mem, irq); - common = ath9k_hw_common(sc->sc_ah); - /* Will be cleared in ath9k_start() */ - set_bit(ATH_OP_INVALID, &common->op_flags); return 0; err_irq: --- a/drivers/net/wireless/ath/ath9k/init.c +++ b/drivers/net/wireless/ath/ath9k/init.c @@ -670,6 +670,7 @@ static const struct ieee80211_iface_comb .num_different_channels = 1, .beacon_int_infra_match = true, }, +#ifdef CONFIG_ATH9K_DFS_CERTIFIED { .limits = if_dfs_limits, .n_limits = ARRAY_SIZE(if_dfs_limits), @@ -679,6 +680,7 @@ static const struct ieee80211_iface_comb .radar_detect_widths = BIT(NL80211_CHAN_WIDTH_20_NOHT) | BIT(NL80211_CHAN_WIDTH_20), } +#endif }; static void ath9k_set_hw_capab(struct ath_softc *sc, struct ieee80211_hw *hw) @@ -781,6 +783,9 @@ int ath9k_init_device(u16 devid, struct common = ath9k_hw_common(ah); ath9k_set_hw_capab(sc, hw); + /* Will be cleared in ath9k_start() */ + set_bit(ATH_OP_INVALID, &common->op_flags); + /* Initialize regulatory */ error = ath_regd_init(&common->regulatory, sc->hw->wiphy, ath9k_reg_notifier); --- a/drivers/net/wireless/ath/ath9k/pci.c +++ b/drivers/net/wireless/ath/ath9k/pci.c @@ -784,7 +784,6 @@ static int ath_pci_probe(struct pci_dev { struct ath_softc *sc; struct ieee80211_hw *hw; - struct ath_common *common; u8 csz; u32 val; int ret = 0; @@ -877,10 +876,6 @@ static int ath_pci_probe(struct pci_dev wiphy_info(hw->wiphy, "%s mem=0x%lx, irq=%d\n", hw_name, (unsigned long)sc->mem, pdev->irq); - /* Will be cleared in ath9k_start() */ - common = ath9k_hw_common(sc->sc_ah); - set_bit(ATH_OP_INVALID, &common->op_flags); - return 0; err_init: --- a/drivers/net/wireless/ath/ath9k/ar9003_2p2_initvals.h +++ b/drivers/net/wireless/ath/ath9k/ar9003_2p2_initvals.h @@ -410,7 +410,7 @@ static const u32 ar9300_2p2_baseband_cor {0x00009e30, 0x06336f77}, {0x00009e34, 0x6af6532f}, {0x00009e38, 0x0cc80c00}, - {0x00009e40, 0x0d261820}, + {0x00009e40, 0x0d261800}, {0x00009e4c, 0x00001004}, {0x00009e50, 0x00ff03f1}, {0x00009e54, 0x00000000}, --- a/drivers/net/wireless/ath/ath9k/ar9330_1p1_initvals.h +++ b/drivers/net/wireless/ath/ath9k/ar9330_1p1_initvals.h @@ -592,7 +592,7 @@ static const u32 ar9331_1p1_baseband_cor {0x00009e30, 0x06336f77}, {0x00009e34, 0x6af6532f}, {0x00009e38, 0x0cc80c00}, - {0x00009e40, 0x0d261820}, + {0x00009e40, 0x0d261800}, {0x00009e4c, 0x00001004}, {0x00009e50, 0x00ff03f1}, {0x00009fc0, 0x803e4788}, --- a/drivers/net/wireless/ath/ath9k/ar9330_1p2_initvals.h +++ b/drivers/net/wireless/ath/ath9k/ar9330_1p2_initvals.h @@ -231,7 +231,7 @@ static const u32 ar9331_1p2_baseband_cor {0x00009e30, 0x06336f77}, {0x00009e34, 0x6af6532f}, {0x00009e38, 0x0cc80c00}, - {0x00009e40, 0x0d261820}, + {0x00009e40, 0x0d261800}, {0x00009e4c, 0x00001004}, {0x00009e50, 0x00ff03f1}, {0x00009fc0, 0x803e4788}, --- a/drivers/net/wireless/ath/ath9k/ar9340_initvals.h +++ b/drivers/net/wireless/ath/ath9k/ar9340_initvals.h @@ -318,7 +318,7 @@ static const u32 ar9340_1p0_baseband_cor {0x00009e30, 0x06336f77}, {0x00009e34, 0x6af6532f}, {0x00009e38, 0x0cc80c00}, - {0x00009e40, 0x0d261820}, + {0x00009e40, 0x0d261800}, {0x00009e4c, 0x00001004}, {0x00009e50, 0x00ff03f1}, {0x00009e54, 0x00000000}, @@ -348,9 +348,9 @@ static const u32 ar9340_1p0_baseband_cor {0x0000a370, 0x00000000}, {0x0000a390, 0x00000001}, {0x0000a394, 0x00000444}, - {0x0000a398, 0x00000000}, - {0x0000a39c, 0x210d0401}, - {0x0000a3a0, 0xab9a7144}, + {0x0000a398, 0x001f0e0f}, + {0x0000a39c, 0x0075393f}, + {0x0000a3a0, 0xb79f6427}, {0x0000a3a4, 0x00000000}, {0x0000a3a8, 0xaaaaaaaa}, {0x0000a3ac, 0x3c466478}, --- a/drivers/net/wireless/ath/ath9k/ar9580_1p0_initvals.h +++ b/drivers/net/wireless/ath/ath9k/ar9580_1p0_initvals.h @@ -90,7 +90,7 @@ static const u32 ar9580_1p0_baseband_cor {0x00009e30, 0x06336f77}, {0x00009e34, 0x6af6532f}, {0x00009e38, 0x0cc80c00}, - {0x00009e40, 0x0d261820}, + {0x00009e40, 0x0d261800}, {0x00009e4c, 0x00001004}, {0x00009e50, 0x00ff03f1}, {0x00009e54, 0x00000000}, --- a/drivers/net/wireless/ath/ath9k/ar953x_initvals.h +++ b/drivers/net/wireless/ath/ath9k/ar953x_initvals.h @@ -257,9 +257,9 @@ static const u32 qca953x_1p0_baseband_co {0x0000a370, 0x00000000}, {0x0000a390, 0x00000001}, {0x0000a394, 0x00000444}, - {0x0000a398, 0x1f020503}, - {0x0000a39c, 0x29180c03}, - {0x0000a3a0, 0x9a8b6844}, + {0x0000a398, 0x001f0e0f}, + {0x0000a39c, 0x0075393f}, + {0x0000a3a0, 0xb79f6427}, {0x0000a3a4, 0x000000ff}, {0x0000a3a8, 0x6a6a6a6a}, {0x0000a3ac, 0x6a6a6a6a}, --- a/drivers/net/wireless/ath/ath5k/phy.c +++ b/drivers/net/wireless/ath/ath5k/phy.c @@ -3709,8 +3709,8 @@ ath5k_hw_txpower(struct ath5k_hw *ah, st AR5K_REG_MS(AR5K_TUNE_MAX_TXPOWER, AR5K_TPC_CHIRP), AR5K_TPC); } else { - ath5k_hw_reg_write(ah, AR5K_PHY_TXPOWER_RATE_MAX | - AR5K_TUNE_MAX_TXPOWER, AR5K_PHY_TXPOWER_RATE_MAX); + ath5k_hw_reg_write(ah, AR5K_TUNE_MAX_TXPOWER, + AR5K_PHY_TXPOWER_RATE_MAX); } return 0;