append DRIVERS "broadcom" scan_broadcom() { local device="$1" local wds local adhoc sta apmode mon disabled local adhoc_if sta_if ap_if mon_if local _c=0 config_get vifs "$device" vifs for vif in $vifs; do config_get_bool disabled "$vif" disabled 0 [ $disabled -eq 0 ] || continue config_get mode "$vif" mode _c=$(($_c + 1)) case "$mode" in adhoc) adhoc=1 adhoc_if="$vif" ;; sta) sta=1 sta_if="$vif" ;; ap) apmode=1 ap_if="${ap_if:+$ap_if }$vif" ;; wds) config_get addr "$vif" bssid [ -z "$addr" ] || { addr=$(echo "$addr" | tr 'A-F' 'a-f') append wds "$addr" } ;; monitor) mon=1 mon_if="$vif" ;; *) echo "$device($vif): Invalid mode";; esac done config_set "$device" wds "$wds" local _c= for vif in ${adhoc_if:-$sta_if $ap_if $mon_if}; do config_set "$vif" ifname "${device}${_c:+-$_c}" _c=$((${_c:-0} + 1)) done config_set "$device" vifs "${adhoc_if:-$sta_if $ap_if $mon_if}" ifdown="down" for vif in 0 1 2 3; do append ifdown "vif $vif" "$N" append ifdown "enabled 0" "$N" done ap=1 infra=1 if [ "$_c" -gt 1 ]; then mssid=1 else mssid= fi apsta=0 radio=1 monitor=0 case "$adhoc:$sta:$apmode:$mon" in 1*) ap=0 mssid= infra=0 ;; :1:1:) apsta=1 wet=1 ;; :1::) wet=1 ap=0 mssid= ;; :::1) wet=1 ap=0 mssid= monitor=1 ;; ::) radio=0 ;; esac } disable_broadcom() { local device="$1" set_wifi_down "$device" wlc ifname "$device" down wlc ifname "$device" bssid `wlc ifname "$device" default_bssid` ( include /lib/network # make sure the interfaces are down and removed from all bridges for dev in $device ${device}-1 ${device}-2 ${device}-3; do ifconfig "$dev" down 2>/dev/null >/dev/null && { unbridge "$dev" } done ) true } enable_broadcom() { local device="$1" local _c config_get channel "$device" channel config_get country "$device" country config_get maxassoc "$device" maxassoc config_get wds "$device" wds config_get vifs "$device" vifs config_get distance "$device" distance config_get slottime "$device" slottime config_get rxantenna "$device" rxantenna config_get txantenna "$device" txantenna config_get_bool frameburst "$device" frameburst config_get macfilter "$device" macfilter config_get maclist "$device" maclist config_get macaddr "$device" macaddr config_get txpower "$device" txpower config_get frag "$device" frag config_get rts "$device" rts config_get hwmode "$device" hwmode config_get htmode "$device" htmode local vif_pre_up vif_post_up vif_do_up vif_txpower local doth=0 local wmm=1 _c=0 nas="$(which nas)" nas_cmd= if_up= [ -z "$slottime" ] && { [ -n "$distance" ] && { # slottime = 9 + (distance / 150) + (distance % 150 ? 1 : 0) slottime="$((9 + ($distance / 150) + 1 - (150 - ($distance % 150)) / 150 ))" } } || { slottime="${slottime:--1}" } case "$macfilter" in allow|2) macfilter=2; ;; deny|1) macfilter=1; ;; disable|none|0) macfilter=0; ;; esac [ ${channel:-0} -ge 1 -a ${channel:-0} -le 14 ] && band=2 [ ${channel:-0} -ge 36 ] && band=1 case "$hwmode" in *na) nmode=1; nreqd=0;; *a) nmode=0;; *ng) gmode=1; nmode=1; nreqd=0;; *n) nmode=1; nreqd=1;; *b) gmode=0; nmode=0;; *bg) gmode=1; nmode=0;; *g) gmode=2; nmode=0;; *gst) gmode=4; nmode=0;; *lrs) gmode=5; nmode=0;; *) case "$band" in 2) gmode=1; nmode=1; nreqd=0;; 1) nmode=1; nreqd=0;; *) gmode=1; nmode=1; nreqd=0;; esac ;; esac # Use 'nmode' for N-Phy only [ "$(wlc ifname $device phytype)" = 4 ] || nmode= # Use 'chanspec' instead of 'channel' for 'N' modes (See bcmwifi.h) [ ${nmode:-0} -ne 0 -a -n "$band" ] && { case "$htmode" in HT40-) chanspec=$(printf 0x%x%x%02x $band 0xe $(($channel - 2))); channel=;; HT40+) chanspec=$(printf 0x%x%x%02x $band 0xd $(($channel + 2))); channel=;; HT20) chanspec=$(printf 0x%x%x%02x $band 0xb $channel); channel=;; *) ;; esac } for vif in $vifs; do config_get vif_txpower "$vif" txpower config_get mode "$vif" mode append vif_pre_up "vif $_c" "$N" append vif_post_up "vif $_c" "$N" append vif_do_up "vif $_c" "$N" config_get_bool wmm "$vif" wmm "$wmm" config_get_bool doth "$vif" doth "$doth" [ "$mode" = "sta" ] || { config_get_bool hidden "$vif" hidden 0 append vif_pre_up "closed $hidden" "$N" config_get_bool isolate "$vif" isolate 0 append vif_pre_up "ap_isolate $isolate" "$N" } wsec_r=0 eap_r=0 wsec=0 auth=0 nasopts= config_get enc "$vif" encryption case "$enc" in *wep*) wsec_r=1 wsec=1 defkey=1 config_get key "$vif" key case "$enc" in *shared*) append vif_do_up "wepauth 1" "$N";; *) append vif_do_up "wepauth 0" "$N";; esac case "$key" in [1234]) defkey="$key" for knr in 1 2 3 4; do config_get k "$vif" key$knr [ -n "$k" ] || continue [ "$defkey" = "$knr" ] && def="=" || def="" append vif_do_up "wepkey $def$knr,$k" "$N" done ;; "");; *) append vif_do_up "wepkey =1,$key" "$N";; esac ;; *psk*) wsec_r=1 config_get key "$vif" key # psk version + default cipher case "$enc" in *mixed*|*psk+psk2*) auth=132; wsec=6;; *psk2*) auth=128; wsec=4;; *) auth=4; wsec=2;; esac # cipher override case "$enc" in *tkip+aes*|*tkip+ccmp*|*aes+tkip*|*ccmp+tkip*) wsec=6;; *aes*|*ccmp*) wsec=4;; *tkip*) wsec=2;; esac # group rekey interval config_get rekey "$vif" wpa_group_rekey eval "${vif}_key=\"\$key\"" nasopts="-k \"\$${vif}_key\"${rekey:+ -g $rekey}" ;; *wpa*) wsec_r=1 eap_r=1 config_get auth_server "$vif" auth_server [ -z "$auth_server" ] && config_get auth_server "$vif" server config_get auth_port "$vif" auth_port [ -z "$auth_port" ] && config_get auth_port "$vif" port config_get auth_secret "$vif" auth_secret [ -z "$auth_secret" ] && config_get auth_secret "$vif" key # wpa version + default cipher case "$enc" in *mixed*|*wpa+wpa2*) auth=66; wsec=6;; *wpa2*) auth=64; wsec=4;; *) auth=2; wsec=2;; esac # cipher override case "$enc" in *tkip+aes*|*tkip+ccmp*|*aes+tkip*|*ccmp+tkip*) wsec=6;; *aes*|*ccmp*) wsec=4;; *tkip*) wsec=2;; esac # group rekey interval config_get rekey "$vif" wpa_group_rekey eval "${vif}_key=\"\$auth_secret\"" nasopts="-r \"\$${vif}_key\" -h $auth_server -p ${auth_port:-1812}${rekey:+ -g $rekey}" ;; esac append vif_do_up "wsec $wsec" "$N" append vif_do_up "wpa_auth $auth" "$N" append vif_do_up "wsec_restrict $wsec_r" "$N" append vif_do_up "eap_restrict $eap_r" "$N" config_get ssid "$vif" ssid append vif_post_up "vlan_mode 0" "$N" append vif_post_up "ssid $ssid" "$N" append vif_do_up "ssid $ssid" "$N" [ "$mode" = "monitor" ] && { append vif_post_up "monitor $monitor" "$N" } [ "$mode" = "adhoc" ] && { config_get bssid "$vif" bssid [ -n "$bssid" ] && { append vif_pre_up "bssid $bssid" "$N" append vif_pre_up "ibss_merge 0" "$N" } || { append vif_pre_up "ibss_merge 1" "$N" } } append vif_post_up "enabled 1" "$N" config_get ifname "$vif" ifname #append if_up "ifconfig $ifname up" ";$N" local net_cfg net_cfg="$(find_net_config "$vif")" [ -z "$net_cfg" ] || { append if_up "set_wifi_up '$vif' '$ifname'" ";$N" append if_up "start_net '$ifname' '$net_cfg'" ";$N" } [ -z "$nas" -o -z "$nasopts" ] || { eval "${vif}_ssid=\"\$ssid\"" nas_mode="-A" [ "$mode" = "sta" ] && nas_mode="-S" [ -z "$nas_cmd" ] && { local pid_file=/var/run/nas.$device.pid nas_cmd="start-stop-daemon -S -b -p $pid_file -x $nas -- -P $pid_file -H 34954" } append nas_cmd "-i $ifname $nas_mode -m $auth -w $wsec -s \"\$${vif}_ssid\" -g 3600 -F $nasopts" } _c=$(($_c + 1)) done killall -KILL nas >&- 2>&- wlc ifname "$device" stdin <